DIOTEC ELECTRONICS CORP. Data Sheet No. GPPD-200-1B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 2 AMP SOFT GLASS PASSIVATED DIODES MECHANICAL SPECIFICATION FEATURES SERIES GP200 - GP210 ACTUAL SIZE OF DO-41 PACKAGE PROPRIETARY JUNCTION PASSIVATION FOR SUPERIOR RELIABILITY AND PERFORMANCE DO - 41 VOID FREE VACUUM DIE SOLDERING FOR MAXIMUM MECHANICAL STRENGTH AND HEAT DISSIPATION (Solder Voids: Typical < 2%, Max. < 10% of Die Area) LL BD (Dia) EXTREMELY LOW LEAKAGE AT HIGH TEMPERATURES LOW FORWARD VOLTAGE DROP BL Color Band Denotes Cathode o 1A at TA = 75 C WITH NO THERMAL RUNAWAY MECHANICAL DATA LL Case: JEDEC DO-41 molded epoxy (U/L Flammability Rating 94V-0) Terminals: Plated axial leads LD (Dia) Soldering: Per MIL-STD 202 Method 208 guaranteed NT LIA P OM SC Polarity: Color band denotes cathode RoH Mounting Position: Any Minimum In mm Sym 0.160 BL Weight: 0.01 Ounces (0.4 Grams) 4.1 Maximum In mm 5.2 0.205 BD 0.103 2.6 0.107 2.7 LL LD 1.00 0.028 25.4 0.71 0.034 0.86 MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%. PARAMETER (TEST CONDITIONS) RATINGS SYMBOL UNITS GP200 GP201 GP202 GP204 GP206 GP208 GP210 Series Number RM 50 100 200 400 600 800 1000 RMS 35 70 140 280 420 560 700 RRM 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage V Maximum RMS Voltage V Maximum Peak Recurrent Reverse Voltage V A = 75 oC, Average Forward Rectified Current @ T O 2 FSM 70 FM 1.1 RR 30 RM 5 50 I Lead length = 0.375 in. (9.5 mm) Peak Forward Surge Current ( 8.3 mSec single half sine wave I superimposed on rated load) Maximum Forward Voltage at 2 Amps DC F V R RR=0.25A) Maximum Reverse Recovery Time (I =0.5A, I =1A, I Maximum Average DC Reverse Current At Rated DC Blocking Voltage T A = 25oC o @ TA = 100 C @ T I Operating and Storage Temperature Range NOTES: (1) Measured at 1MHz & applied reverse voltage of 4 volts (2) 300 nS available - consult factory AMPS J 40 J, TSTG -65 to +175 Typical Junction Capacitance (Note 1) C T VOLTS VOLTS mA pF °C 4.97 fgppd200 H11 DIOTEC ELECTRONICS CORP. Data Sheet No. GPPD-200-2B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 2 AMP SOFT GLASS PASSIVATED SILICON DIODES RATING & CHARACTERISTIC CURVES FOR SERIES GP200 - GP210 100 80 60 40 20 o 0 Ambient Temperature, C FIGURE 1. FORWARD CURRENT DERATING CURVE 10 1 100 Number of Cycles at 60 Hz FIGURE 2. MAXIMUM NON-REPETITIVE SURGE CURRENT 10 TJ = 100 C o 1.0 0.1 TJ = 25 C o 0.01 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 2.0 Instantaneous Forward Voltage (Volts) 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage FIGURE 3. TYPICAL FORWARD CHARACTERISTIC PER DIODE 100 TJ = 25 oC 10 0.1 0.1 1 10 100 Reverse Voltage, (Volts) FIGURE 5. TYPICAL JUNCTION CAPACITANCE PER DIODE H12 4.97bgpdp2