DIOTEC ELECTRONICS CORP Data Sheet No. SESA-100-1B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 MECHANICAL SPECIFICATION FEATURES ACTUAL SIZE OF DO-41 PACKAGE Low switching noise SERIES SPR11 - SPR14 DO - 41 Low forward voltage drop Low thermal resistance LL BD (Dia) High switching capability High surge capability BL Color Band Denotes Cathode High reliability MECHANICAL DATA LL Case: JEDEC DO-41 molded plastic (U/L Flammability Rating 94V-0) Terminals: Plated axial leads LD (Dia) Solderability: Per MIL-STD 202 Method 208 guaranteed Minimum In mm Sym Polarity: Color band denotes cathode Maximum In mm BL 0.160 4.1 0.205 5.2 Mounting Position: Any BD 0.103 2.6 0.107 2.7 Weight: 0.013 Ounces (0.35 Grams) LL LD 1.00 0.028 25.4 0.71 0.034 0.86 MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive loads, derate current by 20%. PARAMETER (TEST CONDITIONS) RATINGS SYMBOL Series Number UNITS SPR11 SPR12 SPR13 SPR14 Maximum DC Blocking Voltage VRM 100 200 300 400 Maximum RMS Voltage VRMS 70 140 210 280 VRRM 100 200 300 400 Maximum Peak Recurrent Reverse Voltage o Average Forward Rectified Current @ TA = 55 C Peak Forward Surge Current ( 8.3mS single half sine wave superimposed on rated load) Maximum Forward Voltage at 1 Amp DC Maximum Average DC Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance, Junction to Ambient Typical Junction Capacitance (Note 1) Junction Operating and Storage Temperature Range NOTES: (1) Measured at 1 MHz and an applied reverse voltage of 4 volts. 1 IFSM 30 VFM o @ TC = 25 C o @ TC = 100 C Maximum Reverse Recovery Time (IF=0.5A, IR=1A, IRR=0.25A) IO 0.95 VOLTS AMPS 1.25 VOLTS IRM 2.0 50 µA RθJA 50 °C/W CJ 50 pF TRR 35 nSec TJ, TSTG -65 to +150 °C 4.97fsesa1 C1 DIOTEC ELECTRONICS CORP. Data Sheet No. SESA-100-2B 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 1 AMP SUPER EFFICIENT RECTIFIERS RATING & CHARACTERISTIC CURVES FOR SERIES SPR11 - SPR14 30 Resistive and Inductive Loads 24 18 NOTE 1 12 NOTE 2 6 0 Case Temperature, oC 10 1 100 Number of Cycles at 60 Hz FIGURE 1. FORWARD CURRENT DERATING CURVE FIGURE 2. MAXIMUM NON-REPETITIVE SURGE CURRENT 10 100 TJ = 150 oC 1.0 10 TJ = 100 oC 1.0 0.1 0.1 TJ = 25 oC 0.01 0.01 20 60 80 100 120 140 Percent of Rated Peak Reverse Voltage 0.001 FIGURE 4. TYPICAL REVERSE CHARACTERISTICS Instantaneous Forward Voltage (Volts) FIGURE 3. TYPICAL FORWARD CHARACTERISTICS NOTES 70 (1) Single Phase, Half Wave, 60 Hz; Lead Length = 0.375" (9.5mm) 60 NOTE 4 (2) JEDEC Method, 8.3 mSec. Single Half Sine Wave (3) TJ = 25 oC, Pulse Width = 300 µSec, 1.0% Duty Cycle 50 o (4) TJ =25 C, f = 1.0 MHz, 2% Duty Cycle. 40 0.1 1 10 100 Reverse Voltage, (Volts) FIGURE 5. TYPICAL JUNCTION CAPACITANCE C2 4.97bsesa1