VG96929 Reverse Bayonet Single-Pole Connectors

VG96929 Reverse Bayonet
Single-Pole Connectors
High-Current, Low-Voltage Power Connectors
for Ruggedized Military and Industrial Applications
United States

United Kingdom

Germany

France

Nordic

Italy

Spain

Japan
High Voltage
Electrical Power Distribution
H
From 0 to 60 in 3.9 Seconds
igh voltage electrical power distribution is
a critical component of the 100% electric
Tesla Roadster.
The reliable distribution of electrical energy
from the car’s lithium-ion energy storage system
to the vehicle’s motor, electronic control module,
HVAC system, transmission and regenerative
braking unit depends on a high-performance
wiring system made up of high-temperature
shielded conduit and ruggedized reverse-bayonet
power connectors—all made by Glenair.
Glenair is on the forefront of innovative
efforts to advance the reliability and performance
of electric vehicles. Glenair power connectors,
cables and conduit are deployed in high-voltage
power management and distribution applications
for systems as demanding as military vehicles
––and as fast as the Tesla Roadster.
EU Sales: Glenair Connectors Italia, S.r.L. Tel: +39-02-91082121 Email: [email protected]
North American Sales: Glenair Connecticut, Tel: 203-741-1115 Email: [email protected]
Factory Support: Commital S.p.a. (Italy) Tel: +39-51-7821811 Email: [email protected]
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
Product Line Overview
The Perfect High Current/Low Voltage
Single Pole Connector for Industrial Equipment
and Military Vehicle Applications.
Harsh Application Environments
Glenair’s VG 96929 Reverse Bayonet Unipolar Connectors are used for the transmission of high
currents with low voltage such as required by applications on military vehicles and on various industrial
equipment. Derived from the VG 95234 Series Connectors and sharing similar mating dimensions and
mechanical charactreristics, VG 96929 connectors feature unique insulating inserts in two parts (front
and rear) that are retained inside the shell by a dynamic spring. Multiple exterior and interior connector
o-rings create a watertight seal (1 bar) and the bayonet coupling system helps to prevent accidental
unmating caused by vibration.
Rugged Materials
Glenair’s VG 96929 connector series is fabricated in aluminum alloy with surface plating IAW QQP416 Type II Class 3. Easy-to-terminate crimp contacts are made from silver plated copper alloy. The
standard insert material is PTFE which provides durable performance in temperature ranges from -55° to
+125°C.
Intermateability
Glenair’s VG 96929 Reverse Bayonet Power Connector is a version of the familiar threaded
coupling MIL-DTL-5015. Glenair’s VG 96929 Connector is interchangeable and intermateable with the
wide range of industry-standard unipolar reverse bayonet connectors designed around MIL-DTL-5015
and/or qualified to VG 96929.

Fast, Easy Bayonet Coupling: 1/4 Turn

Environmental in Mated Condition to 1 Bar

Plug, In-Line, Wall and Box Mount Receptacles

High Shock and Vibration Resistance

Contact Sizes from 25 to 240 sq mm

Audible and Visual Coupling Indicators

Keyed Polarization

Crimp Sleeve/Set Screw Terminations

Intermateable with all VG 96929 Type Reverse Bayonet
Connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
1
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
Applications
VG96929
Glenair’s qualified VG96929 bayonet-lock connector series is based on the VG95234 standard,
and shares the same basic shell configuration and shell dimensions. The VG96929 3-point bayonet
coupling mechanism provides easy mating and positive locking resistance to vibration, shock, and other
connector decoupling forces in high-current, low-voltage applications such as military vehicles, engines
and battery chargers.
Component Materials
VG96929 connector shells are available in aluminum alloy and are supplied standard with an olive
green cadmium finish IAW QQ-P-416. Supplied crimp contacts are silver plated copper alloy. Insulators
are high insulation PTFE: -55°C to +125°C. Gaskets and O-rings are chemical resistant Viton®.
EMI and Environmental Applications
VG96929 Series connectors are perfectly
suited for use in rugged applications where
EEC compliance directives for electromagnetic
compatibility is required. A complete range of
EMI shield termination accessories and plug
grounding fingers are available for both overall
as well as individual wire shields.
Equipped with the appropriate backshells
and environmental sealing, the connectors
are ready to serve in applications that require
resistance to both water and caustic chemicals
such as oils and fuels.
Connector Accessories
Many of the VG96929 connectors come
already paired with selected backshell accessories for most application requirements. See the accessory
descriptions on the opposite page for more information. A full range of additional connector accessories
including dust caps and EMI gaskets are also available.
Please contact the factory for additional information or any of our worldwide sales and engineering
facilities. Glenair’s website, www.glenair.com also has complete information on these products, as well
as other ruggedized power and signal connectors.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
2
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
Available Components
VG96929 offers a simplified ordering and part number format that combines the standard connector
shell styles with the most popular backshells and connector accessories. Available connector shell
styles, backshell types and accessories include:
VG96929 Connector Shell Styles
•
Box Mount Receptacle with Accessory Threads
•
Wall Mount Receptacle with Accessory Threads
•
Through Bulkhead Receptacle
•
Straight and 90° Plug Connector with Accessory Threads
•
In-Line Receptacle
VG96929 Integrated Backshell Types
Type B1, G and B-03: Shrink Boot Adapter
Types E, F and B-14: Backshell for the termination of EMI shielding and/or shrink
boot.
VG96929 Accessories
•
Plug and receptacle protective covers with various lanyard styles for panel attachment
•
Protective plastic covers
•
Conductive and non-conductive gaskets for panel mount connectors
•
Dummy stowage receptacles
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
3
www.glenair.com
Introduction
VG96929
Connectors
VG96929/Series IGE
Single Pole Power Connectors
Cross Reference and Exploded View
Connector Cross Reference
The Glenair Series IGE connector
family is the company’s commercial
equivalent for the VG qualified products
presented in this catalog. Series IGE
offers the flexibility of a broader range of
connector and backshell assemblies as
well as additional plating options and other
variations. Customers are advised to select
VG96929 versions of this reverse-bayonet
connector series when qualification to
VG96929 is a requirement. For non-VG
applications, customers will appreciate the
broader range of options available in the
Series IGE.
Connectors
VG96929
Glenair
Series IGE
Glenair Series
IGE Marine Bronze
VG96929 A1
IGE 2 E ...B-04
IGE 2 E ...B-04 MB
VG96929 A2
IGE 2 E ...B-16
IGE 2 E ...B-16 MB
VG96929 B1
IGE 0 E ...B-03
IGE 0 E ...B-03 MB
VG96929 C1
IGE 9 E ...X-B
IGE 9 E ...X-B MB
VG96929 C2
IGE 9 EFP ...X-B
IGE 9 EFP ...X-B MB
VG96929 E
IGE 8 E ...B-14
IGE 8 E ...B-14 MB
VG96929 F
IGE 6 E ...B-14
IGE 6 E ...B-14 MB
VG96929 G
IGE 6 E ...B-03
IGE 6 E ...B-03 MB
N.A.
IGE 1 E ...B-03
IGE 1 E ...B-03 MB
N.A.
IGE 1 E ...B-14
IGE 1 E ...B-14 MB
N.A.
IGE 2 EFP ...B-04
IGE 2 EFP ...B-04 MB
Contact
Spring Ring
Rear Insert
VG96929A2-22 ZN
Receptacle
Front Insert
Shell
O-Rings
Coupling Nut
O-Rings
Front O-Ring
Ring
Wave Spring
VG96929G-22 FN
Backshell
© 2008 Glenair, Inc.
Back Insert
Contact
Spring Ring
U.S. CAGE Code 06324
Front Insert
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
4
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
Technical Data
Technical Characteristics
Insulating Resistance
5000 MΩ min
Water Resistance
1 Bar
Coupling Torque (VG95319-2)
Vibration Resistance
200 m/s2 10 to 2000 Hz
Temperature Range
-55°C to 125°C
Mechanical Life
500 Mating Cyles
Shell
Size
Opening and
Closing Max
Opening
Min
16
18
5.5 Nm
8.0 Nm
0.5 Nm
0.6 Nm
22
11.0 Nm
0.8 Nm
28
32
17.0 Nm
19.0 Nm
0.9 Nm
1.0 Nm
Contact Retention (VG95319-2)
Contact Size
Test Force Min
H2
100 N
H5
H9
Voltage
120 N
Test Voltage
1050 Vac
140 N
Working Voltage
350 Vac
H15
160 N
H24
200 N
According to MIL-STD-1344
Contacts
Contact
Size
Shell
Size
Wire
Size
Current Rating at 85°C
Continous Peak
H2
16
25 mm2
H5
18
50 mm2
H9
22
H15
H24
per 0.5-1 sec.
Maximum Contact
Resistance
225 A
750 A
0.60 mΩ
350 A
1.000 A
0.30 mΩ
95 mm2
570 A
2.000 A
0.15 mΩ
28
150 mm
2
750 A
3.000 A
0.10 mΩ
32
240 mm2
950 A
5.000 A
0.07 mΩ
1200
Rated Current (Amp)
1000
800
H2
H5
H9
600
H15
H24
400
200
0
0
© 2008 Glenair, Inc.
20
40
60
80
100
120
Ambient Temperature (°C)
U.S. CAGE Code 06324
140
160
180
200
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
5
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
Contact Dimensions, Crimping Tools and
Alternate Keyway Positions
L1
L2
D2
0.5
D1
30°
O 2 +1
-0
Contact Dimensions and Crimping Tools
Contact
Size
Cable
mm2
D1
+0.3 -0
D2
±0.2
L1
±0.2
L2
Hydraulic
Crimping Tool
Crimping
Die
H2
25
7.7
10.9
14.0
11.0
M.112004
M.112020
H5
50
11.2
16.0
15.0
13.0
M.112004
M.112021
H9
95
16.2
21.0
20.5
18.5
M.105013
M.112012
H15
150
20.9
27.0
28.0
25.5
M.105013
M.112018
H24
240
26.8
31.6
30.0
27.0
M.105013
M.112022
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
6
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
Panel Cut-Out and Thickness Dimensions
qE
4x D2 H13
Size
D1
H12
Front
D1
Panel Cut-Out
Back
A2
D2
C2
B1 C1
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
Maximum Panel Thickness
Panel Thickness for Types A1 - A2 - B1
Shell
Size
16
18
22
28
32
A
3.7
3.7
3.7
5.25
6.1
Panel Thickness for Types C1 - C2
© 2008 Glenair, Inc.
Shell
Size
16
18
22
28
32
A
7.2
7.5
7.5
7.5
7.5
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
7
www.glenair.com
Introduction
VG96929
Connectors
VG96929
Single Pole Power Connectors
How to Order
Connector
Size
VG96929
Basic Part Number
G
-22
F
D - Solid Contact
(Pin/Socket for
Style C1 and
ly) C2 Only)
F - Socket Contact
Z - Pin contact
W
Keyway Position
N - Standard
W - Alternate
Connector Style
A1 - Square Flange Rear Panel Mounted Receptacle with Threaded Holes
A2 - Square Flange Front Panel Mounted Receptacle with Threaded Contact Terminal
B1 - Square Flange Rear Panel Mounted Receptacle with Shrink Boot Adapter
C1 - Square Flange Rear Mounted Feed-Thru Receptacle with Threaded Holes
C2 - Square Flange Rear Mounted Feed-Thru Receptacle With Through Holes
E - 90° Plug Connector with Grounding Fingers and Adapter for Braided Shield and Shrink Boot
F - Straight Plug Connector with Grounding Fingers and Adapter for Braided Shield and Shrink Boot
G - Straight Plug Connector with Shrink Boot Adapter
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: [email protected]
8
Introduction
VG96929
Connectors
Glenair Series IGE
Commercial Product Line
How to Order
Modifications
03 - Connector with Shrink Boot Adapter
04 - Square Flange Rear Mount Receptacle with Crimp Contact
14 - Connector with Adapter for Braided EMI Shield and Shrink Boot
16 - Square Flange Front Mount Receptacle with Threaded Contact
Basic
Part
Number
IGE
Connector
Size
6E
22
F - Socket contacts
Z - Pin contacts
H9
Contact
Size
Z
W
Keyway Position
N - Standard
W - Alternate
B - (...)
Bayonet
Coupling
MB
Material
MB - Marine
Bronze
(Omit for
Standard)
Connector Style
0E - Square Flange Rear Panel Mounted Receptacle, Threaded Holes and Shrink Boot Adapter
1E - In-Line Receptacle with Shrink Boot Adapter
2E - Square Flange Front Panel Mounted Receptacle with Threaded Mounting Holes
2EFP - Square Flange Front Panel Mounted Receptacle with Through Mounting Holes
6E - Straight Plug with Grounding Fingers and Adapter for EMI/RFI Shield and Shrink Boot
8E - 90° Plug with Grounding Fingers and Adapter for EMI/RFI Shield and Shrink Boot
9E - Square Flange Rear Mounted Through Bulkhead Receptacle with Threaded or Optional Thru Holes
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
9
www.glenair.com
VG96929
Connectors
VG96929 A1
Square Flange Rear Panel Mount Receptacle
Basic
Part Number
Connector
Size
VG96929
A1 - 22
A1 - Rear
Panel Mount
Receptacle
N - Standard Keyway
W - Alternate Keyway
F
N
F - Socket Contacts
Z - Pin Contacts
q L4
L3
D1
L2
E
D2
D1
L1
IGE2EFP...B-04
APPLICATION NOTES
1.
Rear panel mount square flange receptacle—crimp contacts.
Through mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
10
www.glenair.com
VG96929
Connectors
VG96929 A1
Square Flange Rear Panel Mount Receptacle
DIMENSIONS
Cable
mm2
Size
50
95
150
240
18
22
28
32
D1
M8
M12
M12
M16
L4
±1.5
D2
D3
E
K
L1
+0
+0
-0.15 -0.15 ±0.1 ±0.2 max
L2
+0.4
-0
(F)
(Z)
26.9
33.2
42.8
49.2
23.05
23.05
24.05
28.90
12.0
13.5
12.0
14.0
12.0
12.0
12.0
14.0
15.0
18.7
27.0
31.7
27.0
31.8
39.7
44.5
3
6
6
8
55
66
62
78
qE
4x D2 H13
Size
D1
H12
Front
35.0
41.0
50.8
57.0
12
22
16
27
130
165
320
370
Panel Cut-Out
Back
A2
D2
C2
B1 C1
E
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
10
8
8
8
16
Plug connectors
© 2008 Glenair, Inc.
15
25
20
30
W polarization key
Standard key
Receptacle connectors
D1
L5
L6
L7
L8 Weight
±0.3 ±0.3 ±0.3 min Gr. Max
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
11
www.glenair.com
VG96929
Connectors
VG96929 A2
Square Flange Front Panel Mount Receptacle
with Set Screw Termination
Basic
Part Number
Connector
Size
VG96929
A2 - 22
A2 - Front
Panel Mount
Receptacle
4 ±0.2
O 4.3 H13
1 min
L4
L1
D2
D3
D1
L6
K
L5
APPLICATION NOTES
Front panel mount square flange receptacle—with set screw
termination. Through mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
N
F - Socket Contacts
Z - Pin Contacts
L8
1.
F
q E
L2
N - Standard Keyway
W - Alternate Keyway
U.S. CAGE Code 06324
q L7
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
12
www.glenair.com
VG96929
Connectors
VG96929 A2
Square Flange Front Panel Mount Receptacle
with Set Screw Termination
DIMENSIONS
Cable
mm2
Size
50
95
150
240
18
22
28
32
D1
M8
M12
M12
M16
L4
±1.5
D2
D3
E
K
L1
+0
+0
-0.15 -0.15 ±0.1 ±0.2 max
L2
+0.4
-0
(F)
(Z)
26.9
33.2
42.8
49.2
23.05
23.05
24.05
28.90
12.0
13.5
12.0
14.0
12.0
12.0
12.0
14.0
15.0
18.7
27.0
31.7
27.0
31.8
39.7
44.5
3
6
6
8
55
66
62
78
qE
4x D2 H13
Size
D1
H12
Front
35.0
41.0
50.8
57.0
12
22
16
27
Back
A2
D2
C2
B1 C1
130
165
320
370
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
10
8
8
8
Panel Cut-Out
Plug connectors
© 2008 Glenair, Inc.
15
25
20
30
W polarization key
Standard key
Receptacle connectors
D1
L5
L6
L7
L8 Weight
±0.3 ±0.3 ±0.3 min Gr. Max
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
13
www.glenair.com
VG96929
Connectors
VG96929 B1
Square Flange Rear Panel Wall Mount Receptacle
with Shrink Boot Adapter
Basic
Part Number
Connector
Size
L4
N
F - Socket Contacts
Z - Pin Contacts
5 ±0.2
D3
L5
L2
F
B1 - Rear
Panel Mount
Receptacle
E
D1
3.5 +0.4
-0
B1 - 22
D2
VG96929
N - Standard Keyway
W - Alternate Keyway
q L6
L3
L1
APPLICATION NOTES
1.
Rear panel mount square flange receptacle with shrink boot
adapter. Threaded mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
14
www.glenair.com
VG96929
Connectors
VG96929 B1
Square Flange Rear Panel Wall Mount Receptacle
with Shrink Boot Adapter
DIMENSIONS
Cable
mm2
Size
D1
Max
D2
Max
D3
E
L1
±0.1 ±0.4
L2
±2
L3
Opt
25
50
95
150
240
16
18
22
28
32
20.3
25.8
33.0
41.3
46.1
22.7
28.4
35.3
44.8
49.6
M4
M4
M4
M5
M5
24.6
27.0
31.8
39.7
44.5
29
32
34
38
39
18
18
41.0
50.0
54.0
65.3
66.8
qE
4x D2 H13
Size
D1
H12
Front
32.5
35.0
41.0
50.8
57.0
586
127
250
305
50
86
127
250
305
Back
A2
D2
C2
B1 C1
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
3.2
4.0
4.0
4.0
4.0
Panel Cut-Out
Plug connectors
© 2008 Glenair, Inc.
20.00
23.05
23.05
24.05
28.90
W polarization key
Standard key
Receptacle connectors
D1
L4
L5
L6
L7 Weight
±0.4 ±0.3 ±0.3 ±0.3 Gr. Max
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
15
www.glenair.com
VG96929
Connectors
VG96929 C1 or C2
Square Flange Rear Mount Through Bulkhead
Receptacle with Threaded or Through Mounting Holes
Basic
Part Number
Connector
Size
VG96929
C1 - 22
C1 - Rear Panel Mount with
Threaded Holes
C2 - Rear Panel Mount with
Through Holes
N - Standard Keyway
W - Alternate Keyway
D
N
D - Solid Contact
(Pin/Socket)
D1
E
O-Ring
q L4
L3
D1
L2
L1
VG96929C2
APPLICATION NOTES
1.
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Rear panel mount square flange receptacle—no accessory
threads. Threaded (C1) or Through (C2) mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
16
www.glenair.com
VG96929
Connectors
VG96929 C1 or C2
Square Flange Rear Mount Through Bulkhead
Receptacle with Threaded or Through Mounting Holes
TABLE I: DIMENSIONS
Cable
mm2
Size
95
150
240
22
28
32
D1
max
C1
M4
M5
M5
C2
H13
4.3
5.3
5.3
E
±0.1
L1
max
31.8
39.7
44.5
52.1
52.1
60.5
L2
qE
4x D2 H13
Size
D1
H12
Front
16
18
19
24.0
23.6
25.2
41.0
50.8
57.0
140
235
300
Back
A2
D2
C2
B1 C1
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
Plug connectors
© 2008 Glenair, Inc.
4.0
4.0
4.0
Panel Cut-Out
0°
12
180°
max
L4 Weight
gr.
±0.34 max
W polarization key
Standard key
Receptacle connectors
D1
min
L3
±0.2
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
17
www.glenair.com
VG96929
Connectors
VG96929 E
90° Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
Basic
Part Number
Connector
Size
E - 22
E - 90° Plug Connector with Grounding
Fingers and Adapter for EMI/RFI
Braided Shield and Shrink Boot
F
F - Socket Contacts
Z - Pin Contacts
D1
L4
L3
L2
L6
L5
K
D2
L1
APPLICATION NOTES
1.
90° Plug connector with grounding fingers for EMI/RFI braided shielding
termination and shrink boot, and set screw termination.
2. Material/Finish:
Shell, adapter and coupling nut - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
N
1.5 ±0.7
VG96929
N - Standard Keyway
W - Alternate Keyway
U.S. CAGE Code 06324
D4
D3
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
18
www.glenair.com
VG96929
Connectors
VG96929 E
90° Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
DIMENSIONS
Cable
mm2
Size
D1
max
D2
max
D3
max
D4
±0.3
K
L1
max
L2
opt
L3
max
L4
max
L5
min
95
150
240
22
28
32
43.1
53.5
60.1
39.0
43.7
48.6
42.5
48.0
52.5
28
29
42
38
50
52
81
79
84
19.0
20.6
22.2
41.5
41.5
41.5
57
58
65
6.0
7.5
6.0
440
690
690
120
°
180°
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
±0.5
±0.2
±0.2
Alternate Keyway Positions
Plug connectors
© 2008 Glenair, Inc.
2.9
3.2
3.2
tol
Weight
gr.
Max
W polarization key
Standard key
Receptacle connectors
L6
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
19
www.glenair.com
VG96929
Connectors
VG96929 F
Straight Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
Basic
Part Number
Connector
Size
VG96929
F - 22
F - Straight Plug Connector with
Grounding Fingers and Adapter for
EMI/RFI Braided Shield and Shrink Boot
N - Standard Keyway
W - Alternate Keyway
F
N
F - Socket Contacts
Z - Pin Contacts
L1
D1
D5
K
L2
L4
3.5 ±0.2
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
APPLICATION NOTES
1.
Straight Plug connector with grounding fingers and adapter for EMI/RFI
braided shielding termination and shrink boot.
2. Material/Finish:
Shell, adapter and coupling nut - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
D3
D2
D4
L3
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
20
www.glenair.com
VG96929
Connectors
VG96929 F
Straight Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
DIMENSIONS
Cable
Size
mm2
25
50
95
150
240
16
18
22
28
32
D1
max
D2
max
D3
max
D4
min
D5
max
K
L1
max
L2
max
L3
min
L4
±0.7
32.0
36.5
43.1
53.5
60.1
24.1
28.8
34.1
40.7
47.3
26.0
32.0
37.0
44.0
51.6
15.5
20.0
25.5
32.0
38.0
32.0
36.5
46.0
53.0
60.0
26
32
38
50
52
70
76
86
98
98
45.6
51.1
61.0
71.7
70.7
8
6
9
9
12
1.0
1.0
1.0
1.0
2.0
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
180°
120
°
Standard key
Receptacle connectors
Plug connectors
© 2008 Glenair, Inc.
Weight
gr.
max
80
156
204
300
450
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
21
www.glenair.com
VG96929
Connectors
VG96929 G
Straight Plug Connector with Shrink Boot Adapter
Basic
Part Number
G - 22
G - Straight Plug Connector
with Shrink Boot Adapter
F
N
F - Socket Contacts
Z - Pin Contacts
D2
5 ±0.2
D4
L3
N - Standard Keyway
W - Alternate Keyway
D1
D3
VG96929
Connector
Size
3.5 +0.4
-0
L2
L1
APPLICATION NOTES
1.
Straight Plug connector with shrink boot adapter.
2. Material/Finish:
Shell, adapter and coupling nut - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
22
www.glenair.com
VG96929
Connectors
VG96929 G
Straight Plug Connector with Shrink Boot Adapter
DIMENSIONS
Cable
mm2
Size
D1
max
D2
max
D3
max
D4
min
L1
max
L2
max
L3
opt
Weight
gr.
max
25
50
95
150
240
16
18
22
28
32
32.0
36.5
43.1
53.5
60.1
20.3
25.8
31.5
41.3
46.1
22.7
28.4
35.3
44.8
49.6
14.0
19.0
23.9
27.3
32.8
44
53
57
65
65
25
33
37
37
39
13.3
18.0
15.0
64
106
146
270
320
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
23
www.glenair.com
VG96929
Connectors
IGE 2 E ... B-04 MB
Square Flange Front Panel Mount Receptacle
with Set Screw Termination
Connector
Style
Contact
Size
IGE 2 E
22
N - Standard Keyway
W - Alternate Keyway
H9
Z
W
F - Socket Contacts
Z - Pin Contacts
Size
Modifications
B
04
Bayonet
Coupling
MB
Omit for
Standard
q L4
L3
D1
L2
E
D2
D1
L1
IGE2EFP...B-04
APPLICATION NOTES
1.
Rear panel mount square flange receptacle––with set screw termination.
Through mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
24
www.glenair.com
VG96929
Connectors
IGE 2 E ... B-04 MB
Square Flange Front Panel Mount Receptacle
with Set Screw Termination
DIMENSIONS
Cable
mm2
Size
50
95
150
240
18
22
28
32
D1
±0.3
(FP)
H 13
M4
M4
M4
M5
4.3
4.3
5.3
5.3
D2
±0.1
5
E
±0.1
L1
max
L2
±0.4
L3
±0.3
L4
±0.3
Weight for
Alloy
Version
(gr. max)
27.0
34.9
44.4
49.2
27.0
31.8
39.7
44.5
50.0
54.0
65.3
66.8
23.15
23.15
24.15
29.00
4.0
4.0
4.0
4.0
35.0
41.0
50.8
57.0
150
240
420
520
qE
4x D2 H13
Size
D1
H12
Front
Back
A2
D2
C2
B1 C1
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
Plug connectors
© 2008 Glenair, Inc.
E
16
0°
12
180°
PANEL CUT-OUT
W polarization key
Standard key
Receptacle connectors
D1
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
25
www.glenair.com
VG96929
Connectors
IGE 2 E ... B-16 MB
Square Flange Front Panel Mount Receptacle
with Set Screw Termination
Contact
Size
IGE 2 E
22
H9
Z
W
F - Socket Contacts
Z - Pin Contacts
Size
L2
N - Standard Keyway
W - Alternate Keyway
16
Bayonet
Coupling
MB
Omit for
Standard
O 4.3 H13
1 min
L4
L1
D2
D3
D1
L6
K
L5
APPLICATION NOTES
Front panel mount square flange receptacle––with set screw termination.
Through mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
B
4 ±0.2
L8
1.
Modifications
q E
Connector
Style
U.S. CAGE Code 06324
q L7
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
26
www.glenair.com
VG96929
Connectors
IGE 2 E ... B-16 MB
Square Flange Front Panel Mount Receptacle
with Set Screw Termination
DIMENSIONS
Cable
mm2
Size
D1
50
95
150
240
18
22
28
32
M8
M12
M12
M16
D3
+0
-0.15
E
±0.1
K
±0.2
L1
max
L2
+0.4
-0
(F)
26.9
33.2
42.8
49.2
15.0
18.7
27.0
31.7
27.0
31.8
39.7
44.5
3
6
6
8
55
66
62
78
23.05
23.05
24.05
28.90
12.0
13.5
12.0
14.0
qE
4x D2 H13
Size
D1
H12
Front
L7
±0.3
L8
Min
Weight for
Alloy
Version
(gr. max)
12.0
12.0
12.0
14.0
15
25
20
30
10
8
8
8
35.0
41.0
50.8
57.0
12
22
16
27
195
250
430
530
Back
A2
D2
C2
B1 C1
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
Plug connectors
© 2008 Glenair, Inc.
L6
±0.3
PANEL CUT-OUT
0°
12
180°
D1
(Z)
L5
±0.3
W polarization key
Standard key
Receptacle connectors
L4
±1.5
D2
+0
-0.15
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
27
www.glenair.com
VG96929
Connectors
IGE 0 E ... B-03 MB
Square Flange Rear Panel Mount Receptacle
with Shrink Boot Adapter
Contact
Size
22
H9
Z
F - Socket Contacts
Z - Pin Contacts
Size
3.5 +0.4
-0
D1
5 ±0.2
L4
B
03
Bayonet
Coupling
MB
Omit for
Standard
D3
L5
L2
W
Modifications
D2
IGE 0 E
N - Standard Keyway
W - Alternate Keyway
E
Connector
Style
q L6
L3
L1
APPLICATION NOTES
1.
Rear panel mount square flange receptacle with shrink boot adapter.
Threaded mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
28
www.glenair.com
VG96929
Connectors
IGE 0 E ... B-03 MB
Square Flange Rear Panel Mount Receptacle
with Shrink Boot Adapter
DIMENSIONS
Cable
mm2
25
50
95
150
240
Size
D1
max
D2
max
D3
E
±0.1
L1
±0.4
L2
±2
L3
opt
L4
±0.4
L5
±0.3
L6
±0.3
L7
±0.3
Weight
for Alloy
Version
(gr. max)
16
18
22
28
32
20.3
25.8
33.0
41.3
46.1
22.7
28.4
35.3
44.8
49.6
M4
M4
M4
M5
M5
24.6
27.0
31.8
39.7
44.5
41.0
50.0
54.0
65.3
66.8
29
32
34
38
39
18
18
20.00
23.05
23.05
24.05
28.90
3.2
4.0
4.0
4.0
4.0
32.5
35.0
41.0
50.8
57.0
50
86
127
250
305
120
150
240
420
520
qE
4x D2 H13
Size
D1
H12
Front
Back
A2
D2
C2
B1 C1
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
Plug connectors
© 2008 Glenair, Inc.
E
16
0°
12
180°
PANEL CUT-OUT
W polarization key
Standard key
Receptacle connectors
D1
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
29
www.glenair.com
VG96929
Connectors
IGE 9 E ... X-B MB and IGE 9 EFP ... X-B MB
Square Flange Rear Mount Through Bulkhead
Receptacle with Threaded or Through Mounting Holes
Connector
Style
Contact
Size
IGE 9 E
22
N - Standard Keyway
W - Alternate Keyway
H9
FP
Through Hole
Size
(Omit for Threaded Holes)
W
Bayonet
Coupling
X
B
MB
Omit for
Standard
X - Both Pin and
Socket Contacts
D1
E
O-Ring
q L4
L3
D1
L2
L1
VG96929C2
APPLICATION NOTES
1.
Rear panel mount square flange receptacle––no accessory threads. Through
(FP) or threaded (omit) mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
30
www.glenair.com
VG96929
Connectors
IGE 9 E ... X-B MB and IGE 9 EFP ... X-B MB
Square Flange Rear Mount Through Bulkhead
Receptacle with Threaded or Through Mounting Holes
DIMENSIONS
D1 Max
Cable
mm2
Size
95
150
240
22
28
32
Threaded Through
(FP)
M4
M5
M5
4.3
5.3
5.3
L1
max
Min
31.8
39.7
44.5
52.1
52.1
60.5
16
18
19
qE
4x D2 H13
Size
D1
H12
Front
Weight
for Alloy
Version
(gr. max)
24.0
23.6
25.2
4.0
4.0
4.0
41.0
50.8
57.0
260
390
490
Back
A2
D2
C2
B1 C1
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
Plug connectors
© 2008 Glenair, Inc.
L4
0.34
PANEL CUT-OUT
0°
12
180°
D1
Max
L3
0.2
W polarization key
Standard key
Receptacle connectors
L2x
E
0.1
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
31
www.glenair.com
VG96929
Connectors
IGE 8 E ... B-14 MB
90° Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
Contact
Size
IGE 8 E
22
N - Standard Keyway
W - Alternate Keyway
H9
Z
W
F - Socket Contacts
Z - Pin Contacts
Size
Bayonet
Coupling
L4
L1
APPLICATION NOTES
90° plug connector with grounding fingers and adapter for EMI/RFI braided
shielding termination and shrink boot. Set screw termination.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
14
L3
L6
L2
D2
1.
B
MB
Omit for
Standard
D1
L5
K
Modifications
1.5 ±0.7
Connector
Style
U.S. CAGE Code 06324
D4
D3
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
32
www.glenair.com
VG96929
Connectors
IGE 8 E ... B-14 MB
90° Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
DIMENSIONS
Cable
mm2
95
150
240
Size
D1
Max
D2
Max
D3
Max
D4
±0.3
22
28
32
43.1
53.5
60.1
39.0
43.7
48.6
42.5
48.0
52.5
28
29
42
K
L1
Max
L2
opt
L3
Max
L4
Max
L5
Min
38
50
52
81
79
84
19.0
20.6
22.2
41.5
41.5
41.5
57
58
65
6.0
7.5
6.0
±0.5
±0.2
±0.2
750
1076
1340
120
°
180°
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
2.9
3.2
3.2
Alternate Keyway Positions
Plug connectors
© 2008 Glenair, Inc.
tol
Weight
for Alloy
Version
(gr. max)
W polarization key
Standard key
Receptacle connectors
L6
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
33
www.glenair.com
VG96929
Connectors
IGE 6 E ... B-14 MB
Straight Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
Connector
Style
Contact
Size
IGE 6 E
22
N - Standard Keyway
W - Alternate Keyway
H9
Z
W
F - Socket Contacts
Z - Pin Contacts
Size
L1
Omit for
Standard
3.5 ±0.2
Straight plug connector with grounding fingers and adapter for EMI/RFI
braided shielding termination and shrink boot.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
Bayonet
Coupling
MB
L4
APPLICATION NOTES
1.
14
D3
D2
D4
D5
L2
B
D1
L3
K
Modifications
U.S. CAGE Code 06324
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
34
www.glenair.com
VG96929
Connectors
IGE 6 E ... B-14 MB
Straight Plug Connector with Grounding Fingers
and Adapter for EMI/RFI Braid and Shrink Boot
DIMENSIONS
Cable
mm2
Size
D1
Max
D2
Max
D3
Max
D4
Min
D5
Max
K
L1
Max
L2
Max
L3
Min
L4
±0.7
Weight
for Alloy
Version
(gr. max)
25
50
95
150
240
16
18
22
28
32
32.0
36.5
43.1
53.5
60.1
24.1
28.8
34.1
40.7
47.3
26.0
32.0
37.0
44.0
51.6
15.5
20.0
25.5
32.0
38.0
32.0
36.5
46.0
53.0
60.0
26
32
38
50
52
70
76
86
98
98
45.6
51.1
61.0
71.7
70.7
8
6
9
9
12
1.0
1.0
1.0
1.0
2.0
80
156
204
300
450
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
35
www.glenair.com
VG96929
Connectors
IGE 6 E ... B-03 MB
Straight Plug Connector
with Shrink Boot Adapter
Contact
Size
22
H9
W
F - Socket Contacts
Z - Pin Contacts
Connector
Size
5 ±0.2
D4
L3
Z
Modifications
B
03
Bayonet
Coupling
MB
Omit for
Standard
D1
D3
IGE 6 E
N - Standard Keyway
W - Alternate Keyway
D2
Connector
Style
3.5 +0.4
-0
L2
L1
APPLICATION NOTES
1.
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
Straight plug connector with shrink boot adapter.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
36
www.glenair.com
VG96929
Connectors
IGE 6 E ... B-03 MB
Straight Plug Connector
with Shrink Boot Adapter
DIMENSIONS
Cable
mm2
Size
D1
Max
D2
Max
D3
Max
D4
Min
L1
Max
L2
Max
L3
Opt
Weight
for Alloy
Version
(gr. max)
25
50
95
150
240
16
18
22
28
32
32.0
36.5
43.1
53.5
60.1
20.3
25.8
31.5
41.3
46.1
22.7
28.4
35.3
44.8
49.6
14.0
19.0
23.9
27.3
32.8
44
53
57
65
65
25
33
37
37
39
13.3
18.0
15.0
115
185
250
460
540
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
37
www.glenair.com
VG96929
Connectors
IGE 1 E ... B-03 MB
In-Line Receptacle with Shrink Boot Adapter
Connector
Style
Contact
Size
IGE 1 E
22
H9
Connector
Size
3.5 +0.4
-0
Bayonet
Coupling
Z
B
F - Socket Contacts
Z - Pin Contacts
Omit for
Standard
1E
MB
1E - In-Line
Receptacle with
Shrink Boot Adapter
L2
D2
D1
5 ±0.2
D3
L3
L1
APPLICATION NOTES
1.
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
In-line receptacle with shrink boot adapter.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
38
www.glenair.com
VG96929
Connectors
IGE 1 E ... B-03 MB
In-Line Receptacle with Shrink Boot Adapter
DIMENSIONS
Cable
mm2
Size
D1
Max
D2
Max
D3
±0.3
L1
±0.4
L2
±2
L3
Opt
Weight
for Alloy
Version
(gr. max)
25
50
95
150
240
16
18
22
28
32
20.3
25.8
31.5
41.3
46.1
22.7
28.4
35.3
44.8
49.6
32.5
35.0
41.0
50.8
57.0
41.0
50.0
54.0
65.3
66.8
29
32
34
38
39
18
18
50
86
127
250
305
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
39
www.glenair.com
VG96929
Connectors
IGE 1E ... B-14
In-Line Receptacle with Adapter for
EMI/RFI Braided Shield and Shrink Boot
Basic
Part Number
IGE
Connector
Size
1E
22
Contact
Size
H9
Bayonet
Coupling
Z
B - 14
MB
14 - In-Line Receptacle
with Adapter for
EMI/RFI Braided Shield
and Shrink Boot
F - Socket Contacts
Z - Pin Contacts
1E - In-Line
Receptacle
Omit for
Standard
L1
L2
D1
3.5 ±0.2
APPLICATION NOTES
1.
D3
D5
K
D2
D4
L3
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
In-Line Receptacle with adapter for EMI/RFI braided shield and shrink boot.
2. Material/Finish:
Shell, adapter and coupling nut - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
40
www.glenair.com
VG96929
Connectors
IGE 1E ... B-14
In-Line Receptacle with Adapter for
EMI/RFI Braided Shield and Shrink Boot
DIMENSIONS
Cable
mm2
25
50
95
150
240
Size
D1
±0.3
D2
max
D3
max
D4
min
D5
max
16
18
22
28
32
32.0
35.0
41.0
50.8
57.0
24.1
28.8
34.1
40.7
47.3
26.0
32.0
37.0
44.0
51.6
15.5
20.0
25.5
32.0
38.0
32.0
36.5
46.0
53.0
60.0
L3
min
L4
±0.7
Weight
for Alloy
Version
(gr. max)
26
32
38
50
52
70
76
86
98
98
45.6
51.1
61.0
71.7
70.7
8
6
9
9
12
1.0
1.0
1.0
1.0
2.0
80
156
204
300
450
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
L2
max
W polarization key
Standard key
Receptacle connectors
K
L1
max
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
41
www.glenair.com
VG96929
Connectors
IGE 2E ... B-04 and IGE 2EFP ... B-04 MB
Square Flange Rear Panel Mount Receptacle
with Threaded or Through Mounting Holes
Basic
Part Number
IGE
Connector
Size
2E
Contact
Size
22
H9
2E - Square Flange Rear
Mounted Receptacle with
Threaded Mounting Holes
2EFP - Square Flange Rear
Mounted Receptacle with
Through Mounting Holes
Bayonet
Coupling
Z
Omit for
Standard
B - 04
F - Socket Contacts
Z - Pin Contacts
MB
04 - Square Flange Rear
Mount Receptacle with
Crimp Contact
q L4
L3
D1
L2
E
D2
D1
L1
IGE2EFP...B-04
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
APPLICATION NOTES
1.
Square flange rear mounted receptacle with threaded (2E) or Through (2EFP)
mounting holes.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
42
www.glenair.com
VG96929
Connectors
IGE 2E ... B-04 and IGE 2EFP ... B-04 MB
Square Flange Rear Panel Mount Receptacle
with Threaded or Through Mounting Holes
DIMENSIONS
D1
±0.3
Cable
Size
mm2
25
50
95
150
240
16
18
22
28
32
(FP)
H 13
M4
M4
M4
M5
M5
4.3
4.3
4,3
5.3
5.3
D2
±0.1
5
E
±0.1
L1
max
L2
±0.4
L3
±0.3
L4
±0.3
Weight
for Alloy
Version
(gr. max)
22.2
27.0
34.9
44.4
49.2
24.6
27.0
31.8
39.7
44.5
41.0
50.0
54.0
65.3
66.8
20.00
23.15
23.15
24.15
29.00
3.2
4.0
4.0
4.0
4.0
32.5
35.0
41.0
50.8
57.0
50
86
127
250
305
qE
4x D2 H13
Size
D1
H12
Front
Back
A2
D2
C2
B1 C1
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
180°
120
°
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
Plug connectors
© 2008 Glenair, Inc.
E
16
0°
12
180°
Panel Cut-Out
W polarization key
Standard key
Receptacle connectors
D1
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
43
www.glenair.com
VG96929
Connectors
IGE 0E ... ZL
Square Flange Rear Panel Mount Receptacle
with Rapid Bayonet Joint
IGE
Connector
Size
0E
22
Contact
Size
H9
0E - Fixed Connector with
Square Flange with 4
Threaded Holes for Rear
Panel Mounting
23.05C±0.4
Bayonet
Coupling
Z
B - 04
F - Socket Contacts
Z - Pin Contacts
D
4 ±0.2
3.5
1.9
Omit for
Standard
MB
Backshell for Use with
Heat Shrink Boot
ZL - without BAND-IT®
ZLF - with BAND-IT®
4 xG M4
23.3
Basic
Part Number
90B max
F ±0.3
41
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
APPLICATION NOTES
1.
Square flange rear mounted receptacle with adapter for EMI/RFI braided
shield using stainless steel BAND-IT® band and shrink boot.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
E
31.8
±0.1
1.5
termine di legge.
9.7
ØL21.7
19
ØK-0.
+0.2
0
ØA -0.15
37.4
ØM
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
44
www.glenair.com
VG96929
Connectors
IGE 0E ... ZL
Square Flange Rear Panel Mount Receptacle
with Rapid Bayonet Joint
DIMENSIONS
Cable
Size 0 ØA
/ -0.1
mm2
95
22
37.4
B
Max
C
±0.2
D
±0.2
E
±0.1
F
±0.2
G
Thread
ØK
±0.1
ØL
±0.1
ØM
±0.1
Weight
for Alloy
Version
(gr. max)
90
23.05
4.0
31.8
41.0
M4
19.0
21.7
23.3
170
Please consult the factory for additional sizes.
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
45
www.glenair.com
VG96929
Connectors
IGE 6E ... 03-16
Straight Plug with Rapid Bayonet Joint
Basic
Part Number
IGE
Connector
Size
6E
Contact
Size
22
6E - Straight Plug
Connector, with Threaded
Contact Suitable for Lug Type
Termination. To be used with
Heat Shrinkable Tubing.
F
12
H9
Bayonet
Coupling
F
B - 16
F - Socket Contacts
Z - Pin Contacts
E
25
Omit for
Standard
MB
16 - Threaded Contact
on the Plug Connector
Rosettawasher
elastica
Spring
P
M12
Spring washer
Dado
Nut
G
3.5
Capocorda
Lug
D
38.5
B max
43.1
C50.1
~A 67
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
APPLICATION NOTES
1.
Straight plug connector with special threaded contact suitable for lug type
termination.
2. Material/Finish:
Shell - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
46
www.glenair.com
VG96929
Connectors
IGE 6E ... 03-16
Straight Plug with Rapid Bayonet Joint
DIMENSIONS
Cable
Size 0 / A
-0.1
mm2
95
22
37.4
B
Max
C
±0.1
D
±0.1
E
±0.1
F
±0.1
G
±0.1
P
Thread
Weight
for Alloy
Version
(gr. max)
43.2
50.1
38.5
25.0
12.0
3.5
H12
180
Please consult the factory for additional sizes.
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
47
www.glenair.com
VG96929
Connectors
IGE 7E
Jam Nut Receptacle with Rapid Bayonet Joint
Basic
Part Number
IGE
Connector
Size
7E
Contact
Size
22
H9
Bayonet
Coupling
F
F - Socket Contacts
Z - Pin Contacts
7E - Jam Nut Receptacle
with Bayonet Coupling
~A68
F
2.4÷9.1
Omit for
Standard
MB
B - 16
16 - Jam Nut Receptacle
with Threaded Contact
B ±0.2
54
E
~ 34
~ L20
MØP
12
0
37.3
D -0.1
C 18 UNEF
1-5/8"
~L 20
Ch 46
33.7G±0.1
4.8H±0.2
STANDARD FINISH
(For QQ-A-591 Aluminum Shells)
APPLICATION NOTES
1.
Jam nut receptacle with rapid bayonet coupling, central power contact, single
pole, double crown and threaded end terminbation.
2. Material/Finish:
Shell, adapter and coupling nut - Aluminum alloy/olive drab passivation.
Insert - PTFE (Teflon)/N.A.
Contact - Copper alloy/silver plating (See pages 5 and 6
for additional contact information).
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Requirements
Thermal Shock
Salt Spray After
Thermal Shock
Electrical Conductivity
Abrasion Resistance
Cadmium with Olive
Drab Passivation
IAW QQ-P-416
-55°C + 125°C
500 hour
Very Good
Very Good
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
48
www.glenair.com
VG96929
Connectors
IGE 7E
Jam Nut Receptacle with Rapid Bayonet Joint
DIMENSIONS
Cable
Size
mm2
95
22
ØA
±0.1
B
±0.2
P
Metric
Thread
C
Inches
ØD
0 / -0.1
E
±0.1
F
±0.2
G
±0.2
H
±0.2
L
±0.1
Ch
Weight
for Alloy
Version
(gr. max)
68.0
54.0
M12
1 5/8 - 18
4.0
34.0
24 ÷ 9.1
33.7
4.8
20.0
Ch 46
150
Please consult the factory for additional sizes.
W polarization key
Alternate Keyway Positions
To avoid mismating of similar
connectors, VG96929 connectors are
available with keyway in two different
positions as shown below:
0°
12
180°
Receptacle connectors
180°
120
°
Standard key
Plug connectors
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
N: 180°
W: 120°
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
49
www.glenair.com
VG96929
Accessories
ITS 05 - XX
Dummy Stowage Receptacle
Basic
Part Number
ITS
M
Shell
Size
05 - 22
MB
05 - Dummy
Receptacle
Omit for
Standard
T
R
ØA
S
APPLICATION NOTES
1.
Dummy receptacle to protect the plug connector when not in use.
2. Material/Finish:
Shel1 - Aluminum alloy/olive drab passivation.
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
50
www.glenair.com
VG95234
Accessories
ITS 05 - XX
Dummy Stowage Receptacle
DIMENSIONS
Part
Number
Shell
Size
ØA
+0
-0.1
K
±0.2
M
+0.2
-0
R
±0.1
S
+0.2
ØT
+0.1
-0
Weight
(gr. max)
ITS 05-16
ITS 05-18
ITS 05-22
ITS 05-28
ITS 05-32
16
18
22
28
32
27.2
30.7
37.3
46.7
53.4
3.3
4.0
4.0
4.0
4.0
14.5
19.1
19.6
20.7
22.3
24.60
27.00
31.75
39.70
44.5
32.5
35.0
41.0
50.9
57.0
3.2
3.2
3.2
3.7
4.3
25
35
45
60
70
qE
4x D2 H13
Size
© 2008 Glenair, Inc.
D1
H12
Front
D1
Panel Cut-Out
Back
A2
D2
C2
B1 C1
E
16
-
27.7
M4
M4
4.5
24.6
18
27.4
31.1
M4
M4
4.5
27.0
22
33.7
37.8
M4
M4
4.5
31.8
28
43.3
47.1
M4
M5
5.5
39.7
32
49.7
53.8
M4
M5
5.5
44.5
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
51
www.glenair.com
VG96929
Accessories
ITB 06T
Plug Connector Cover
with Stainless Steel Chain
Basic
Part Number
ITB
Shell
Size
MB
06T - 16
Omit for
Standard
06T - Plug
Connector Cover
L
ØB
ØA
C
ØF
DIMENSIONS
APPLICATION NOTES
1.
Plug Connector Cover with stainless steel chain.
2. Material/Finish:
Cover - Aluminum alloy/olive drab passivation.
Chain - Stainless steel/passivated.
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
Part
Number
Shell
Size
ØA
max
ØB
±0.1
C
min
ØF
+0.2
-0
L
max
Weight
(gr. max)
ITB 06T-16
ITB 06T-18
ITB 06T-22
ITB 06T-28
ITB 06T-32
16
18
22
28
32
32.5
36.4
43.5
54.0
60.0
27.4
30.8
37.4
46.7
53.4
123
123
138
206
206
4.3
4.3
4.8
4.8
5.6
24.0
33.0
33.0
33.0
34.2
35
45
55
70
80
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
52
www.glenair.com
VG95234
Accessories
ITB 02T
Receptacle Connector Cover
with Stainless Steel Chain
Basic
Part Number
ITB
Shell
Size
MB
02T - 16
Omit for
Standard
02T - Receptacle
Connector Cover
L
ØB
ØA
C
ØF
DIMENSIONS
APPLICATION NOTES
1.
Receptacle Connector Cover with stainless steel chain.
2. Material/Finish:
Cover - Aluminum alloy/olive drab passivation.
Chain - Stainless steel/passivated.
3. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
Part
Number
ITB 02T-16
ITB 02T-18
ITB 02T-22
ITB 02T-28
ITB 06T-32
U.S. CAGE Code 06324
Shell ØA ØB
C
Size max ±0.1 min
16
18
22
28
32
32.5
36.4
43.5
54.0
60.0
31.6
35.1
41.7
52.0
58.7
108
123
123
206
206
ØF
L
Weight
+0.2 max
(gr. max)
-0
4.3
4.3
4.3
5.68
5.6
15.5
21.2
21.2
21.2
21.2
20
25
30
40
50
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
53
www.glenair.com
VG96929
Accessories
IT 90376 ... Y/R and TP02
Protective Plastic Dust Cover
for Plug or Receptacle Connectors
ØB ØA
ØC
DIMENSIONS
Part
Number
Style and
Shell Size
ØA
±0.25
ØB
±0.25
ØC
±0.78
IT90376-18Y
TP02-18
IT90376-24R
TP02-28
TP02-32
IT90376-16R
IT90376-18R
IT90376-22R
IT90376-28R
IT90376-32R
Receptacle 16
Receptacle 18
Receptacle 22
Receptacle 28
Receptacle 32
Plug 16
Plug 18
Plug 22
Plug 28
Plug 32
26.11
30.40
37.16
46.45
53.15
23.80
27.76
34.04
43.56
49.91
27.63
33.15
38.94
49.05
55.75
29.29
29.34
35.81
45.46
51.82
31.75
37.00
43.18
52.00
60.00
30.99
33.78
40.38
49.53
56.39
APPLICATION NOTES
© 2008 Glenair, Inc.
1.
Protective Plastic Dust Cover.
2.
All dimensions are metric unless otherwise noted.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
54
www.glenair.com
VG95234
Accessories
IT 40450-XX or IT 40450-XXS
Fixed Connector Gasket
for Square Flange Front Panel Mounting
Basic
Part Number
IT
Shell
Size
40450 - 14
Square Flange
Front Panel Mount Gasket
qR
1 ±0.4
S
S - Conductive
Omit for Non-Conductive
0.5 ±0.2
ØA
qR
ØA
qS
ØT
ØT
qS
DIMENSIONS
Part
Number
Shell
Size
ØA
+1
R
±0.2
S
±0.5
ØT
+0.5
IT40450-10
IT40450-14
IT40450-16
IT40450-18
IT40450-20
IT40450-22
IT40450-24
IT40450-28
IT40450-32
IT40450-36
IT40450-40
10SL
14S
16S-16
18
20
22
24
28
32
36
40
15.7
22.1
25.3
28.4
31.6
34.8
38.0
44.3
50.7
57.0
61.9
18.2
23.0
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
55.5
25.4
30.0
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
69.9
4.2
4.2
4.2
4.2
4.2
4.2
4.2
5.1
5.1
5.1
5.1
APPLICATION NOTES
1.
Conductive or non-conductive gasket for square flange front panel mounted connectors.
2. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
55
www.glenair.com
VG96929
Accessories
IT 40460-XX or IT 40460-XXS
Fixed Connector Gasket
for Square Flange Rear Panel Mounting
Basic
Part Number
IT
Shell
Size
40460 - 14
Square Flange
Rear Panel Mount Gasket
qR
1 ±0.4
S
S - Conductive
Omit for Non-Conductive
0.5 ±0.2
ØA
qR
ØA
qS
ØT
ØT
qS
DIMENSIONS
Part
Number
Shell
Size
ØA
+1
R
±0.2
S
±0.5
ØT
+0.5
IT40460-10
IT40460-14
IT40460-16
IT40460-18
IT40460-20
IT40460-22
IT40460-24
IT40460-28
IT40460-32
IT40460-36
IT40460-40
10SL
14S
16S-16
18
20
22
24
28
32
36
40
18.2
24.6
27.4
30.8
34.2
37.4
40.9
46.7
53.4
59.6
65.5
18.2
23.0
24.6
27.0
29.4
31.8
34.9
39.7
44.5
49.2
55.5
25.4
30.0
32.5
35.0
38.0
41.0
44.5
50.8
57.0
63.5
69.9
4.2
4.2
4.2
4.2
4.2
4.2
4.2
5.1
5.1
5.1
5.1
APPLICATION NOTES
1.
Conductive or non-conductive gasket for square flange rear panel mounted connectors.
2. All dimensions are metric unless otherwise noted.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
56
www.glenair.com
Other Ruggedized Electrical
Power and Signal Connectors
for Rail, Mass Transit, Industrial
and Military Applications
G
lenair manufactures a broad range of qualified electrical power and signal connectors for
electrical vehicles, industrial equipment, as well as rail, mass-transit and harsh environment
military applications. Many of the connector products, backshells and accessories are
manufactured to comply with the MIL-DTL-5015 or MIL-DTL-26482 specifications, which include
hundreds of versatile power and signal connector designs ideally suited for electrical power and signal
interconnect cabling. The addition of reverse bayonet coupling to these robust military style connectors
improves their reliability and mating performance in rugged, vibration and shock applications. Glenair is
also able to offer many of these same connector families qualified to NATO and VG standards including
VG95234 and VG95328. Specialty application connectors, such as our popular VG qualified CB
connector for radio and audio applications are also available.
The Glenair Power Product Group has been manufacturing these products since 1985 in the
company’s facility located in Bologna, Italy. The Power Product Group factory consists of two 4000
square meter plants in Villanova and Fossatone which are certified to UNI EN ISO 9001, NATO
AQAP110 and ISO 9001:2000.
A worldwide sales and support network, including dedicated teams in Italy and the United States
provides application engineering and order assistance. Glenair’s worldwide network of sales and support
professionals are also factory trained to support the Power Product Groups entire line of ruggedized
electrical power and signal connectors, cables and power distribution products.
The Glenair Power Product Group Line
ITS Connector Series
The Glenair ITS connector series is based on the
MIL-DTL-5015 standard, but feature an improved
reverse bayonet coupling technology in place of
the threaded coupling used in MIL-DTL-5015.
The 3-point bayonet coupling mechanism reduces
coupling time and provides easier mating when
the connector is in an awkward position. Positive
locking of the three stainless steel pins provides
reliable resistance to vibration and shock, and
prevents connector de-coupling in even the
most rugged applications such as locomotives,
mass-transit cars and military vehicles. The
products are qualified to the VG 95234 standard.
The ITS-RG Series incorporates a ruggedized
outer coating of rubber for additional mechanical
strength and to prevent shell damage due to
rough handling.
© 2008 Glenair, Inc.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
57
www.glenair.com
Index
IGE Series Connectors
ITH Series
The ITH Series is most notable for its rigid
inserts and crimp contacts that provide both better
electrical insulation as well as reduced assembly
time. The reverse bayonet ITH Series connector
is also based on the MIL-DTL-5015 standard, but
supports only a reduced selection of insert
arrangements. All connectors in the series
conform to the NATO VG95234, French
(NFF 61030) and British (BS 6853) electrical
standards, as well as EEC compliance directives
for electromagnetical compatibility. EMI shield
termination accessories are available for both
overall as well as individual wire shields.
UniPower™ Single Pole Connectors
IPT and IPT SE Bayonet-Lock
Connectors
The Glenair IPT series is built in accordance
with MIL-C-26482 and is applied in countless
applications where reliability and miniaturization
are required. Used in military applications, the IPT
series features reliable coupling and a complete
range of backshell accessories. A VG qualified
version of the product, VG95328 is also available.
© 2008 Glenair, Inc.
Our IGE series connector delivers
outstanding performance in high-current power
applications, mainly in military systems such as
ground-vehicle support. IGE series connectors
are are used for the transmission of high
currents with low voltage such as is required in
military vehicles or industrial equipment. The
connector uses a unipolar contact junction with
high performance dielectric materials. Several
O-rings inside and outside the connectors provide
watertightness up to 1 bar, while the bayonet
coupling system avoids accidental unmatings in
high-vibration applications.
UniPower™ is a single pole electrical
connector used by the entertainment, construction
and power utility industries for temporary high
current applications. Glenair UniPower™ Power
Distribution Connectors provide safe and reliable
power distribution connections, typically in
threephase or other polyphase power distribution
systems. CE Approved for use in Europe only.
Consult factory for other regional approvals.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
58
www.glenair.com
CSOX is a worldwide standard for the
connection of lighting equipment in the showbusiness field.
CB Series “PogoPin” Connectors
The Glenair CB connector is designed
to address audio equipment and field radio
interconnect requirements in military and other
demanding applications. The ultra-miniature
reverse bayonet connector utilizes spring-loaded,
wiping contacts that ensure reliable electrical and
environmental performance with each mating.
The product is qualified to the VG95351 and
VG96934 standards.
IT Connector Series
The Glenair IT series conforms to the MILDTL-5015 threaded-coupling connector standard
for power and signal applications in both industrial
and military applications. Insert arrangements
from 1 to 150 contacts, with contact sizes from 20
awg to 4/0 awg are available. These connectors
are intermateable with other industry standard
MIL-DTL-5015 connector families. A wide range
of connector backshells and accessories are
available, including protective covers for both
plugs and receptacles.
The VG95234 is the German military BWB
standard equivalent of our commercial ITS
reverse bayonet connector. As with the ITS, the
series is based on the MIL-DTL-5015 standard,
but feature an improved reverse bayonet
coupling. The 3-point bayonet mechanism
reduces coupling time and provides easier
mating when the connector is in an awkward
position. Positive locking of the three stainless
steel pins provides reliable resistance to vibration
and shock, and prevents connector de-coupling
in even the most rugged applications such as
military vehicles.
VG95328 Qualified Bayonet-Lock
Connectors
ITZ Series Connectors
The need for a threaded MIL-DTL-5015 type
connector with an improved double-start stub
ACME style thread profile led to the development
of the Glenair ITZ connector series. Available in
the complete range of 5015 insert arrangements,
this connector family offers faster and more
reliable coupling than standard, fine-thread MILDTL-5015 connectors.
© 2008 Glenair, Inc.
VG95234 (German Military BWB)
The Glenair Series VG95328 Bayonet-Lock
Signal Connector is ideally suited for all general
and environmental applications that require
a high-performance military type cylindrical
connector with crimp-removable contacts.
Qualified to VG95328, the bayonet mechanism
provides fast and easy coupling, especially when
the connector is situated in an awkward or hard to
reach location.
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
59
www.glenair.com
Index
CSOX
Index
VG96929 Bayonet-Lock Connectors
Index
Product Line Overview..........................................1
Technical Data......................................................5
IGE 8 E ... B-14 MB 90° Plug with Grounding
Fingers and EMI/RFI Braid and Shrink Boot
Adapter.........................................................32
IGE 6 E ... B-14 MB Straight Plug with Grounding
Fingers and EMI/RFI Braid and Shrink Boot
Adapter.....................................................34
Contact Dimensions, Crimping Tools
and Keyway Positions......................................6
IGE 6 E ... B-03 MB Straight Plug Connector
with Shrink Boot Adapter...............................36
Panel Cut-Out and Thickness Dimensions..........7
Master VG96929 How to Order.............................8
IGE 1 E ... B-03 MB In-Line Receptacle
with Shrink Boot Adapter...............................38
Master Glenair Series IGE Commercial Product
Line How to Order............................................9
IGE 1E ... B-14 In-Line Receptacle with EMI/RFI
Braided Shield and Shrink Boot Adapter..........40
VG96929 A1 Fixed Receptacle with Square
Flange for Rear Panel Mounting.....................10
IGE 2E ... B-04 and IGE 2 EFP Square Flange
Rear Panel Mount Receptacle with Threaded
or Through Mounting Holes............................42
Applications....................................................2
Available Components..........................................3
Cross Reference and Exploded View....................4
VG96929A2 Square Flange Front Panel Mount
Receptacle with Set Screw Termination.........12
VG96929B1 Square Flange Rear Panel Mount
Receptacle with Shrink Boot Adapter............14
VG96929 C1 or C2 Square Flange Rear Mount
Through Bulkhead Receptacle.......................16
VG96929E 90° Plug with Grounding Fingers
and EMI/RFI Braid and Shrink Boot Adapter...18
VG96929F Straight Plug with Grounding Fingers
and EMI/RFI Braid and Shrink Boot Adapter..20
VG96929 G Straight Plug Connector with
Shrink Boot Adapter.....................................22
IGE 2E ... B-04 MB Square Flange Front Panel
Mount Receptacle, Set Screw Termination.....24
IGE 2E ... B-16 MB Square Flange Front Panel
Mount Receptacle, Set Screw Termination.....26
IGE 0 E ... B-03 MB Square Flange Rear Mount
Receptacle with Shrink Boot Adapter.................28
IGE 9 E ... X-B MB and IGE 9 EFP ... X-B MB
Square Flange Rear Mount Through Bulkhead
Receptacle with Threaded or Through Mounting
Holes........................................................30
© 2008 Glenair, Inc.
IGE 0E ... ZL Square Flange Rear Panel Mount
Receptacle with Rapid Bayonet Joint............44
IGE 6E ... 03-16 Straight Plug with
Rapid Bayonet Joint.......................................46
IGE 7E Jam Nut Receptacle with
Rapid Bayonet Joint.......................................48
ITS -05 - XX Dummy Stowage Receptacle............50
ITB 06T Plug Connector Cover with
Stainless Steel Chain.....................................52
ITB 02T Receptacle Connector Cover with
Stainless Steel Chain.....................................53
IT 90376 ... Y/R and TP02 Protective Plastic Dust
Cover for Plug or Receptacle Connectors.....54
IT 40450-XX or IT 40450-XXS Fixed Connector
Gasket for Square Flange Front Panel
Mounting........................................................55
IT 40460-XX or IT 40460-XXS Fixed Connector
Gasket for Square Flange Rear Panel
Mounting..................................................56
U.S. CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
E-Mail: [email protected]
60
www.glenair.com
More Options Than Ever Before!
Glenair Commercial Series ITS
Reverse Bayonet Connectors
Ruggedized Env
ironmental
Power and Sign
al Connectors
Over 200 MIL-C
-5015 In
sert Arrangemen
Reverse Bayone
ts • Improved
t Coupling • Now
VG 95234 Qualifi
ed!
United S
tates

United K
ingdom

Germany

France

Nordic

Italy

Spain

Japan
EU Sales: Glenair Connectors Italia, S.r.L. Tel: +39-02-91082121 Email: [email protected]
North American Sales: Glenair Connecticut, Tel: 203-741-1115 Email: [email protected]
Factory Support: Commital S.p.a. (Italy) Tel: +39-51-7821811 Email: [email protected]
www.glenair.com
A World of Interconnect Solutions
A World of
Interconnect
Solutions
Glenair, Inc.
1211 Air Way • Glendale, California • 91201-2497
Telephone: 818-247-6000 • Fax: 818-500-9912 • [email protected]
www.glenair.com
Telephone:
Glenair Industrial Power and
203-741-1115
Signal Connector Group
Facsimile:
25 Village Lane
203-741-0053
Wallingford, CT
[email protected]
06492
Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Mansfield
Notts, NG18 5BY England
Glenair Microway Systems
7000 North Lawndale Avenue
Lincolnwood, IL
60712
Glenair Nordic AB
Gustav III : S Boulevard 46
S - 169 27 Solna
Sweden
Glenair Electric GmbH
Siemensstrasse 9
D-61449 Steinbach
Germany
Glenair Italia S.R.L.
Via Santi, 1
20037 Paderno Dugnano
Milano, Italy
© 2008 Glenair, Inc.
Telephone:
847-679-8833
Facsimile:
847-679-8849
Telephone:
49-6171-5905-0
Facsimile:
49-6171-5905-90
[email protected]
Telephone:
39-02-91082121
Facsimile:
39-02-99043565
[email protected]
Printed in U.S.A.
Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain
Glenair France SARL
7, Avenue Parmentier
Immeuble Central Parc #2
31200 Toulouse
France
Telephone:
44-1623-638100
Facsimile:
44-1623-638111
[email protected]
Telephone:
46-8-50550000
Facsimile:
46-8-50550001
[email protected]
Telephone:
34-925-89-29-88
Facsimile:
34-925-89-29-87
[email protected]
Telephone:
33-5-34-40-97-40
Facsimile:
33-5-61-47-86-10
[email protected]