Backshells, Covers and Accessories

CB Series
Connectors
CB Series “PogoPin” Connectors
Banding Adapter for Shielding and Overmolding
Black zinc plated aluminum alloy adapter fits all CB plugs and receptacles
with M14 x 1 threads. Attach adapter to connector and fill with potting compound
for wire protection and waterproofing. Attach shield and cable strength members
to adapter with Glenair tool 600-061 using 3mm stainless steel BAND-IT® straps.
Maximum weight 7 grams.
Description
Part Number
CBBSBI-T
Banding Adapter
30.2 MAX
11.9
1.5
13.9
MAX
18.3 MAX
15.6
MAX
1.5
BAND-IT® Shield Termination System
Fast, cost-effective shield termination. Attach cable shields to Series 80
connectors or backshells with BAND‑IT® 300 series SST/Passivate in accordance
with I.A.W AMS 2700. The BAND-IT® system offers fast termination and the
flexibility to handle a wide range of parts with just one band size. Approved for
aerospace and defense, these straps have successfully passed rigorous shock,
vibration and environmental testing.
1
1
2
Micro Band Installation Tool. Use
with 3.05 mm wide bands. 172 mm
length, 0.6 Kg.
Figure
Description
1
Micro Band Installation Tool
Figure
Length
in.
2
8.125
206.38
2
Micro Band, 3.05 mm wide. Available
flat or pre-coiled. Stainless steel.
Part Number
600-061
Part Number
Flat
Pre-Coiled
600-057
600-057-1
Accommodates
Maximum Diameter
22.3
Contact Glenair or visit our website (glenair.com) to view our complete line of BAND-IT®
products, including pneumatic tools for high volume production and calibration kits.
206.4 ± 0.8
3.05 REF
4.95 REF
© 2007 Glenair, Inc.
TAIL LENGTH
INDICATOR MARK
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
21
E-Mail: [email protected]
CB Series
Connectors
CB Series “PogoPin” Connectors
Heat Shrinkable Boots
Protect Your Cable Harness with semi-rigid heat-shrinkable boots. These
easy-to-use boots provide excellent electrical, mechanical and environmental
protection. Made from flame-retardant elastomeric material, these adhesive-lined
boots are resistant to high temperature and chemicals. Heating the boot causes
the boot to shrink onto the connector and cable . An adhesive lining bonds the
boot to the connector and cable and fills small gaps for a complete seal. Choose
straight cable exit or right angle exit.
Style 1
1
Style 2
Straight boot, adhesive-lined. Fits all
CB Series PogoPin connectors.
SPECIFICATIONS
Standard
Material
Fluid resistant crosslinked elastomer per
VG95343 Part 6
Low Toxicity
Material
Fluid resistant crosslinked elastomer per
NAVSEA 5617649
Adhesive
Polyamide hot melt
Min. Shrink
Temperature
Installation
Temperature
Temperature
Range
Solvent
Resistance
+135°C
Figure
1
2
Configuration
Straight
Right Angle
2
Fluid Resistant
Elastomer
809S060-3
809A060-3
Right angle boot for 90° cable
exit. Fits all CB Series PogoPin
Connectors.
Low-Smoke Zero
Halogen
809S060-3H
809A060-3H
Straight Boot Dimensions
38.1
REF
ø23.5
MIN
1.5 REF
ø10.4
MAX
ø 5.6 MAX
+175°C.
BEFORE HEAT
SHRINKING
-55°C to +105°C
Saline – Excellent
Hydraulic Fluid – Very Good
Lubricating Oil – Very Good
Aviation Fuel – Very Good
Gasoline – Very Good
Diesel – Fair
De-Icing Fluid – Excellent
Flammability
Self-extinguishing
Dielectric
Strength
480 V/mil
© 2007 Glenair, Inc.
AFTER HEAT
SHRINKING
Right Angle Boot Dimensions
ø20.3
REF
ø23.5
MIN
ø 5.6 MAX
ø22.9
REF
BEFORE HEAT
SHRINKING
1.5 REF
AFTER HEAT
SHRINKING
ø10.4
MAX
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
22
Rev. 05-APR-2007
E-Mail: [email protected]
CB Series
Connectors
CB Series “PogoPin” Connectors
PG Thread Adapter
PG thread adapters fit all CB Series connectors with M14 x 1 accessory
threads. These adapters accept all standard PG 7 liquid tight cordgrips.
Style 2
Style 1
1
PG Adapter
PG Adapter with Flexible
Cordgrip
PG 7 adapter fits all CB Series
connectors with M14 x 1 accessory
thread. Aluminum alloy with black
zinc plating. Maximum weight 6
grams.
Figure
Configuration
1
2
Adapter Only
Adapter and Cordgrip
2
PG 7 adapter with liquid tight flexible
cordgrip. Adapter fits all CB Series
connectors with M14 x 1 accessory
thread. Aluminum alloy with black
zinc plating. Cordgrip is 6/6 nylon
with thermoplastic elastomeric
sealing gland. Fits cable diameter
3.5mm to 7mm Supplied with nitrile
O-ring for adaper-to-cordgrip seal.
Maximum weight 15 grams.
Part Number
CBBSPG7-T
CBBSPG7CD-T
26.0 MAX
18.3
MAX
PG 7 FEM
THD
M14. x 1 FEM
THD
PG Adapter with Flexible
Cordgrip, with CB Plug and
Jacketed Cable
86.4 MAX
18.3
MAX
19.1 MAX
M14. x 1 FEM
THD
Jam Nut Tightening Tool
Nickel-plated steel tightening tool fits jam nut receptacles. Fits 3/8 inch drive
torque wrench. 18.5mm diameter, 25.4 mm length, 23 grams.
Part Number
600-146-04
Recommended installation torque: 6-7 N-m.
© 2007 Glenair, Inc.
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
23
Rev. 05-APR-2007
E-Mail: [email protected]
CB Series
Connectors
CB Series “PogoPin” Connectors
O-Ring
Cono premibussola
Ground ring
Rondella
Washer
Shielded Backshell with Flexible Rubber Bushing
7
6
5
Black zinc plated aluminum alloy backshell fits CB Series connectors with
M14 x 1 threads. Black nitrile bushing provides flexible cable strain relief and cable
sealing. Cut tapered bushing to fit varying cable diameters. Supplied unassembled
with two O-rings and aluminum alloy ground ring. Maximum weight 15 grams.
Part Number
CBBS-E1
Bussola
Rubber bushing
Custodia anteriore
Front adapter
Ø 18.0
Ø6
Ø7
Custodia posteriore
Rear adapter
Ø5
43 MAX.
90 MAX.
O-RING
Connector shown
for reference only.
WASHER
GROUND
RING
RUBBER BUSHING
FRONT ADAPTER
REAR ADAPTER
Dummy Receptacle for CB Series Plugs
Attach dummy receptacle to panel or chassis with M4 screw (not supplied).
Aluminum alloy, black zinc plated. Resilient gasket holds plug in place. Maximum
weight 7 grams.
Part Number
CBCAP-Z6
15.7 MAX.
+0.2
4.2 -0
23.0 MAX.
GASKET
© 2007 Glenair, Inc.
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
24
E-Mail: [email protected]
CB Series
Connectors
CB Series “PogoPin” Connectors
Rubber Protective Cover for CB Series Receptacles
Black nitrile rubber cover fits all CB Series receptacles including shrouded
versions. Tight friction fit prevents water ingress to unmated connector. Supplied
with nylon rope, ring terminal and ferrule. Terminal and ferrule are supplied
unassembled. Attach to panel with ring terminal, or attach to cable with crimp
ferrule. Use standard crimp tools for installation. Maximum weight 5 grams.
Part Number
VG96934Z4
14.5±0.5
6±0.5
+0
Ø 3 - 0.5
11.5
+0,1
O 10.5 0
O 13
O 15.6
O 19.5±0,5
CRIMP FERRULE FOR
CABLE ATTACHMENT
(SUPPLIED LOOSE)
3.5 MIN
23.0 MIN
RING TERMINAL FOR
PANEL ATTACHMENT
(SUPPLIED LOOSE)
Protective Cover for CB Series Plugs
Watertight aluminum alloy cover protects CB Series plugs from damage
when unmated. Black zinc plated. O-ring holds cover in place. Supplied with
nylon rope, with ring terminal or loop. Attach with ring terminal, or attach to cable
with loop. Maximum weight 7 grams.
Figure
Configuration
1
2
25 mm Loop
Ring Terminal
Part Number
CBA10Z6
CBA10Z3
23.0 MAX.
1
+ 10
100 - 0
LOOP FOR CABLE
ATTACHMENT
15.7 MAX.
+5
80 - 0
2
© 2007 Glenair, Inc.
Ø 25
+0
Ø 3 - 0.5
RING TERMINAL FOR
PANEL ATTACHMENT
All dimensions in millimeters (mm). Information subject to change without notice.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
25
E-Mail: [email protected]