AS83519/1 and/2 Type HST Sleeves 077-010 AS83519/1 Type Heat Shrink Termination (HST) Sleeves No Lead Wire Basic Part Number Size (Table I) 077-010 03 T T = Thermal Indicator (Omit for None) P D S0103X A Dia .250 .325 .250 .325 øE B DIA øG øE øF øF ø H MAX Dimensions in Inches (millimeters) are subject to change without notice. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 2 E-Mail: [email protected] AS83519/1 and/2 Type HST Sleeves 077-010 AS83519/1 Type Heat Shrink Termination (HST) Sleeves No Lead Wire Designed to meet SAE AS83519 performance requirements, Glenair Heat Shrink Termination (HST) shield to ground termination sleeves are fabricated from special transparent cross-linked polyvinylidene fluoride tubing to deliver optimal environmental shield termination in aerospace and defense industry applications. Each HST device is equipped with a pre-fluxed solder preform and thermally stabilized thermoplastic sealing rings that encapsulated and protect the shield-to-ground termination. Glenair HST devices are tested to perform from -55ºC to 125ºC IAW SAE AS83519. TABLE I: Dimensions, Marking Code and Military Reference Number Military Ref Marking No Lead Code Wire (See Note 1) Size A Dia Min B Dia Min P ± .07 (1.8) D Min W Ref E Dia Max F Dia Min G Dia Min H Dia Max 01 .105 (2.67) .075 (1.91) .65 (16.5) .325 (8.26) .095 (2.42) .105 (2.65) .035 (0.90) .020 (0.50) .075 (1.90) M83519/1-1 S0101X 02 .145 (3.68) .105 (2.67) .65 (16.5) .325 (8.26) .095 (2.42) .145 (3.68) .055 (1.40) .030 (0.72) .105 (2.65) M83519/1-2 S0102X 03 .200 (5.08) .170 (4.32) .65 (16.5) .325 (8.26) .125 (3.18) .200 (5.08) .085 (2.15) .050 (1.25) .170 (4.30) M83519/1-3 S0103X 04 .255 (6.48) .235 (5.97) .75 (19.0) .325 (8.26) .125 (3.18) .255 (6.45) .130 (3.30) .070 (1.80) .235 (5.95) M83519/1-4 S0104X 05 .300 (7.62 .275 (7.0) .75 (19.0) .325 (8.26) .125 (3.18) .300 (7.60) .170 (4.30) .100 (2.50) .275 (7.00) M83519/1-5 S0105X Notes 1. Code number option to be located on sleeve (Example: S0103X) Material/Finish: • Insulation sleeve - Heat-shrinkable, radiation crosslinked, modified polyvinylidene fluoride per MIL-I-23053/8. Color - Transparent blue. • Meltable sealing ring - Thermally stabilized thermoplastic, color blue. • Solder preform - Alloy Sn63 per QQ-S-571 with thermochromic indicator using ROL1 type RMA flux. Application • Temperature rating: -55°C to +150°C. Cable jacket rating: 125°C min. • Shield plating: Tin or silver • For best results prepare cable as shown Dimensions in Inches (millimeters) are subject to change without notice. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 3 E-Mail: [email protected]