AS83519/1 and/2 Type HST Sleeves 077-030 AS83519/2 Type Heat Shrink Termination (HST) Sleeves Pre-Installed Braid Pre-Tinned on Both Ends Thermal Indicator (Omit for None) Basic Part Number 077-030 03 T Size Table II P D B Dia A Dia Pre-Installed Braid Pre-Tinned Both Ends See Note 1 L W .250 .325 .250 .325 øE øG øE øF øF ø H MAX Dimensions in Inches (millimeters) are subject to change without notice. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 6 E-Mail: [email protected] AS83519/1 and/2 Type HST Sleeves 077-030 AS83519/2 Type Heat Shrink Termination (HST) Sleeves Pre-Installed Braid Pre-Tinned on Both Ends Designed to meet SAE AS83519 performance requirements, Glenair Heat Shrink Termination (HST) shield to ground termination sleeves are fabricated from special transparent cross-linked polyvinylidene fluoride tubing to deliver optimal environmental shield termination in aerospace and defense industry applications. Each HST device is equipped with a pre-fluxed solder preform and thermally stabilized thermoplastic sealing rings that encapsulated and protect the shield-to-ground termination. Glenair HST devices are tested to perform from -55ºC to 125ºC IAW SAE AS83519. Please contact the factory for alternative ground lead materials including lightweight AmberStrand and ArmorLite. 01 02 03 04 05 06 07 08 09 10 A Dia Min .105 (2.67) .145 (3.68) .200 (5.08) .255 (6.48) .300 (7.62 .105 (2.67) .145 (3.68) .200 (5.08) .255 (6.48) .300 (7.62 B Dia Min .075 (1.91) .105 (2.67) .170 (4.32) .235 (5.97) .275 (7.0) .075 (1.91) .105 (2.67) .170 (4.32) .235 (5.97) .275 (7.0) P ± .07 (1.8) .65 (16.5) .65 (16.5) .65 (16.5) .75 (19.0) .75 (19.0) .65 (16.5) .65 (16.5) .65 (16.5) .75 (19.0) .75 (19.0) TABLE I: Dimensions, Marking Code and Braid Information D W Tin Copper Braid 36 AWG Marking L Min Min Ref Ref 101-004 Code .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-062-36 S0301G .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-062-36 S0302G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-062-36 S0303G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-062-36 S0304G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-062-36 S0305G .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-031-36 S0306G .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-031-36 S0307G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-031-36 S0308G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-031-36 S0309G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-031-36 S0310G E Dia Max .105 (2.65) .145 (3.68) .200 (5.08) .255 (6.45) .300 (7.60) .105 (2.65) .145 (3.68) .200 (5.08) .255 (6.45) .300 (7.60) F Dia Min .035 (0.90) .055 (1.40) .085 (2.15) .130 (3.30) .170 (4.30) .035 (0.90) .055 (1.40) .085 (2.15) .130 (3.30) .170 (4.30) G Dia Min .020 (0.50) .030 (0.72) .050 (1.25) .070 (1.80) .100 (2.50) .020 (0.50) .030 (0.72) .050 (1.25) .070 (1.80) .100 (2.50) H Dia Max .075 (1.90) .105 (2.65) .170 (4.30) .235 (5.95) .275 (7.00) .075 (1.90) .105 (2.65) .170 (4.30) .235 (5.95) .275 (7.00) 11 12 13 14 15 16 17 18 19 20 .105 (2.67) .145 (3.68) .200 (5.08) .255 (6.48) .300 (7.62 .105 (2.67) .145 (3.68) .200 (5.08) .255 (6.48) .300 (7.62 .075 (1.91) .105 (2.67) .170 (4.32) .235 (5.97) .275 (7.0) .075 (1.91) .105 (2.67) .170 (4.32) .235 (5.97) .275 (7.0) .65 (16.5) .65 (16.5) .65 (16.5) .75 (19.0) .75 (19.0) .65 (16.5) .65 (16.5) .65 (16.5) .75 (19.0) .75 (19.0) TABLE II: Dimensions, Marking Code and Braid Information .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-062-36N S0311G .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-062-36N S0312G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-062-36N S0313G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-062-36N S0314G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-062-36N S0315G .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-031-36N S0316G .325 (8.26) .095 (2.42) 6.00 (152.4) 101-004-031-36N S0317G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-031-36N S0318G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-031-36N S0319G .325 (8.26) .125 (3.18) 6.00 (152.4) 101-004-031-36N S0320G .105 (2.65) .145 (3.68) .200 (5.08) .255 (6.45) .300 (7.60) .105 (2.65) .145 (3.68) .200 (5.08) .255 (6.45) .300 (7.60) .035 (0.90) .055 (1.40) .085 (2.15) .130 (3.30) .170 (4.30) .035 (0.90) .055 (1.40) .085 (2.15) .130 (3.30) .170 (4.30) .020 (0.50) .030 (0.72) .050 (1.25) .070 (1.80) .100 (2.50) .020 (0.50) .030 (0.72) .050 (1.25) .070 (1.80) .100 (2.50) .075 (1.90) .105 (2.65) .170 (4.30) .235 (5.95) .275 (7.00) .075 (1.90) .105 (2.65) .170 (4.30) .235 (5.95) .275 (7.00) Size Material/Finish: • Insulation sleeve - Heat-shrinkable, radiation crosslinked, modified polyvinylidene fluoride per MIL-I-23053/8. Color - Transparent blue. • Meltable sealing ring - Thermally stabilized thermoplastic, color blue. • Solder preform - Alloy Sn63 per ANSI-J-STD-004. • Flux - ROM1 per ANSI-J-STD-004 (to be used on nickel plated shields only). • Optional thermo indicator - Color to colorless. • -90 = Wire color is white with black stripes. Consult factory for additional colors. Application: • Temperature rating, Table I -55°C to +150°C, Cable jacket rating - 125° Min. • Temperature rating, Table II -55°C to +175°C, Cable jacket rating - 150° Min. • Shield plating, Table I - Tin or silver. • Shield plating, Table II - Nickel. • For best results prepare cable as shown (See Page 6). • Braid Length - 6 inches, standard. Lengths in 8, 12, 18 and 24-inches available. Dimensions in Inches (millimeters) are subject to change without notice. © 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 7 E-Mail: [email protected]