Piggyback Shrink Boot Connector Adapters 319-183 EMI/RFI Environmental Piggyback Boot Adapter, Composite with Integrated Shield Sock Fast and Easy Final Installation of Environmental Boots to Shield Sock Assemblies How To Order Cutaway View Product Series Angular Function S = Straight T = 45° Elbow W = 90° Elbow 319 H S Connector Designator (Table III) A = MIL-DTL-83723, Series III; MIL-DTL-5015; MIL-DTL-26482 F = MIL-DTL-38999, Series I & II G = MIL-DTL-28840 H = MIL-DTL-38999, Series III & IV U = MIL-DTL-29600 D Hex - Typ Finish Sym (Table II) Optional Braid Material A, B, T & L (Insert Dash for Standard) (Table V) 183 XM 19 Basic No. Boot Material Type (Table IV) Shell Size (Table III) 1.25 (31.8) Max O-Ring Typ A Thread B - 2 Conductive Hot Melt Adhesive Anti-Decoupling Device Hot Melt Adhesive M As Supplied C Typ F E Sym S - Straight L Max Typ Raised Configuration (Mfr's Option) - Typ Material and Finish/Notes G Elbow, Adapter: - High Grade Engineering Thermoplastic/See Table III Coupling Nut, Anti-Decoupling Device: High Grade Engineering Thermoplastic/N.A. O-Ring: Silicone/N.A. Braid: See Table IV Boot: See Table V Band: Cres Assembly Notes Sym W 90° Cable Entry (Typ) © 2012 Glenair, Inc. See Table I on page 3 for front-end dimensional details. Assembly identified with manufacturer’s name and part number, space permitting. Glenair 600-091 or 600-157 Series Backshell Assembly Tools are recommended for assembly and installation. O-Ring supplied with Connector Designator F & H only. O-Ring not supplied with Connector Designator A. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 8 E-Mail: [email protected] Piggyback Shrink Boot Connector Adapters 319-183 EMI/RFI Environmental Piggyback Boot Adapter, Composite with Integrated Shield Sock Table III: Shell Size Shell Size A F/L G H U 08 03 10 12 14 16 18 20 22 24 61 - 08 10 12 14 16 18 20 22 24 - 11 _ 13 15 17 19 23 25 09 11 13 15 17 19 21 23 25 - 08 10 12 14 16 18 20 22 24 - 28 - - - - A Thread ØC Max 7/16-28 UNEF M12 X 1-6H 1/2-20 UNEF 1/2-28 UNEF 9/16-24 UNEF M15 X 1-6H 5/8-24 UNEF 5/8-28 UN 11/16-24 UNEF M18 X 1-6H 3/4-20 UNEF 3/4-28 UNS 13/16-20 UNEF M22 X 1-6H 7/8-20 UNEF 7/8-28 UNEF 15/16-20 UNEF M25 X 1-6H 1-20 UNEF 1-28 UN 1 1/16-18 UNEF M28 X 1-6H 1 1/8-18 UNEF 1 1/8-28 UNEF 1 3/16-18 UNEF M31 X 1 6H 1 1/4-18 UNEF 1 1/4-28 UNEF 1 5/16-18 UNEF M34 X 1-6H 1 3/8-28 UN 1 7/16-18 UNEF M37 X 1-6H 1 1/2-18 UNEF 1 1/2-28 UN 1 9/16-18 UNEF 1/34-18 UNS D Flats E F G H J .060 (1.5) .090 (2.3) .090 (2.3) .060 (1.5) .090 (2.3) Cable Entry ± .03 (0.8) L Max M Min N Max .860 (21.8) .750 (19.1) .690 (17.5) .880 (22.4) 1.19 (30.2) .720 (18.3) 1.00 (25.4) .250 (6.40) 2.36 (59.9) 0.26 (6.60) .138 (3.51) .980 (24.9) .880 (22.4) .750 (19.1) 1.00 (25.4) 1.25 (31.8) .750 (19.1) 1.06 (26.9) .380 (9.70) 2.36 (59.9) 0.38 (9.70) .197 (5.00) 1.16 (29.5) 1.00 (25.4) .810 (20.6) 1.13 (28.7) 1.31 (33.3) .750 (19.1) 1.13 (28.7) .500 (12.7) 2.83 (71.9) 0.51 (13.0) .197 (5.00) 1.28 (32.5) 1.13 (28.7) .880 (22.4) 1.31 (33.3) 1.38 (35.1) .760 (19.3) 1.16 (29.5) .630 (16.0) 2.83 (71.9) 0.63 (16.0) .236 (5.60) 1.41 (35.8) 1.25 (31.8) .940 (23.9) 1.38 (35.1) 1.44 (36.6) .780 (19.8) 1.18 (30.0) .750 (19.1) 3.74 (95.0) 0.76 (19.3) .236 (5.60) 1.52 (38.6) 1.38 (35.1) .970 (24.6) 1.44 (36.6) 1.47 (37.3) .790 (20.1) 1.19 (30.2) .810 (20.6) 3.74 (95.0) 0.82 (20.8) .276 (7.01) 1.64 (41.7) 1.50 (38.1) 1.06 (26.9) 1.63 (41.4) 1.56 (39.6) .820 (20.8) 1.22 (31.0) .940 (23.9) 3.74 (95.0) 0.94 (23.9) .335 (8.51) 1.77 (45.0) 1.63 (41.4) 1.13 (28.7) 1.75 (44.5) 1.63 (41.4) .860 (21.8) 1.26 (32.0) 1.06 (26.9) 4.92 (125) 1.07 (27.2) .394 (10.0) 1.89 (48.0) 1.75 (44.5) 1.19 (30.2) 1.88 (47.8) 1.69 (42.9) .890 (22.6) 1.29 (32.8) 1.19 (30.2) 4.92 (125) 1.19 (30.2) .394 (10.0) 2.02 (51.3) 1.88 (47.8) 2.15 (54.6) 2.00 (50.8) 1.34 (34.0) 2.13 (54.1) 1.78 (45.2) .920 (23.4) 1.32 (33.5) 1.38 (35.1) 4.92 (125) 1.38 (35.1) .591 (15.0) Table II: Backshell Finish Options H Sym J Table V: Braided Shielding Options Finish Description 2000 Hour Corrosion Resistant XM Electroless Nickel 2000 Hour Corrosion Resistant NI-PTFE, XMT Nickel-Fluorocarbon Polymer 2000 Hour Corrosion Resistant Cadmium XW Olive Drab Over Electroless Nickel Sym T 45° Symbol A B – T L Braid Type 100% AmberStrand® 75%/25% AmberStrand® Blend Nickel/Copper 34 AWG Tin/Copper 34 AWG Armorlite™ N After Unrestricted Shrinkage Dimensions in Inches (millimeters) are subject to change without notice. Table IV: Boot Material Selection Guide Attribute Continuous Operating Temp. Resistence To Fuels, Oils Low Toxicity, Zero Halogen © 2012 Glenair, Inc. Type 1 High-Performance Semi-Rigid Elastomer -75° To +150° cExcellent No Type 2 Zero-Halogen Semi-Rigid Polyolefin 30° To +135° cVery Good Yes U.S. CAGE Code 06324 Type 3 General Purpose Flexible Polyolefin 55° To 135° c Good No Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com 9 E-Mail: [email protected]