Optiva OTS-2O Series EDFA Micro Erbium Doped Fiber Amplifier DATASHEET | MARCH 2014 SATCOM The Optiva OTS-2O Series of Micro Erbium Doped Fiber Amplifier (µEDFA) Gain Block Modules are an ideal building block for system integrators to extend the fiber link for long-haul signal transport. The OTS-2O Series is designed to meet the most demanding noise performance requirements of fiber optic communications and control systems and performs all the functions required of an optical amplifier for system integration. The OTS-2O Series μEDFA modules provide input and output optical isolation for stable, low-noise operation. The input and output optical signal power levels are detected for monitoring and control. The input optical signal is amplified with active gain control for a constant output power level, or with active output power control for constant gain mode operation. Applications CATV Systems Long Distance RF/Microwave Fiber Optic Communication Links Sensing and Control Systems High-Performance Supertrunking Links High Power Distribution Networks Redundant Ring Architectures FTTx Networks Features Full Function Fiber Optic Amplifier Low Noise Figure (Typ < 4.5 dB) Pin: -6 dBm to +12 dBm Pout: +14 dBm to +23 dBm The OTS-2O Series also provides local and remote monitors and alarms for all critical operating parameters via SNMP and EMCORE View GUI. The optical output can be split into multiple ports by optional external splitter. An optional back reflection monitoring feature enables safe output optical power managment. System Applications The OTS-2O Series μEDFA modules fit in the EMCORE Optiva family of enclosures including the 3 RU 19" rack-mount, fan-cooled enclosure (Model OT-CC-16F) supporting up to 16 Optiva modules and the 1 RU 19" rack-mount, fan-cooled enclosure (Model OT-CC-6) supporting up to 6 Optiva modules. In addition, the OTS-2O Series modules fit the compact tabletop or wall-mountable enclosure Model OT-DTCR-2. The EMCORE Optiva family of platforms consists of a wide range of RF, microwave, video, data and audio signal transport solutions. The integration of the OTS-2O Series μEDFA Gain Block Modules and the Optiva family of 1550 nm optical MUX-DEMUX solutions into the platform can extend the fiber links of longhaul signal transport for a wide range of applications. Block Diagram Standard and Optional Gain Flatness Low Electrical Power Consumption Input/Output Isolation > 40/40 dB Polarization Dependent Gain < 0.1 dB Polarization Mode Dispersion < 0.2 ps Input & Output Return Losses < -40 dB Output Residual Pump Power < -30 dBm Back Reflection Monitoring RS-232 and SNMP Monitor and Control Fits in Optiva Enclosures (16, 6, and 2 slot) RoHS Compliant © 2014 EMCORE Corporation | REV 2014.03 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Optiva OTS-2O Series EDFA Micro Erbium Doped Fiber Amplifier DATASHEET | MARCH 2014 SATCOM Optical/Electrical Characteristics Parameter Unit Limit Operating Input Power Pin (dBm) Max Operating Input Power Pin (dBm) Min -6 -6 Output Power Po (dBm) Nominal 14 +/- .25 17 +/- .25 Noise Figure NF (dB) Typical ≤ 4.0 dB ≤ 4.0 dB Static Gain Flatness ∆Gs (dB) Max +/- 0.5 Dynamic Gain Flatness ∆Gd (dB) Max Output Power Stability (dB) Max Psys (W) Max Power Consumption (Steady State) Model Comments (Note 1) 1400 1700 2000 2300 12 12 12 12 - -6 -6 Typical (may vary for some models) 20 +/- .25 23 +/- .25 (Note 2) ≤ 4.0 dB ≤ 4.0 dB @ Pin = 0 dBm, no Pin monitoring (Notes 3, 7, 8) +/- 0.5 +/- 0.5 +/- 0.5 (Note 4) +/- 1.0 +/- 1.25 +/- 1.5 +/- 2.0 (Notes 5, 7) +/- 0.1 +/- 0.1 +/- 0.1 +/- 0.1 (Note 6) 4 5 9 14 70°C Case NOTES: 1. Unless stated otherwide, all specifications apply over the full operating temperature and humidity ranges. 2. Measurement variations. 3. Measured with 8 evenly spread input optical signals @ 25°C, ΣPin ≈ 0 dBm. Measuring with 1 input signal with Pin ≈ 0 dBm and λ ≈ 1550 nm is also possible. 4. Measured with a swept Probe Signal (Pp), where Pp ≈ 0 dBm @ 25°C. 5. Measured with a swept Probe Signal (Pp) and a fixed Tone Signal (Pt) @ ≈ 1550 nm; (Pt ≈ Pp +20 dB; Pt + Pp ≈ 0 dBm) @ 25°C; Gain Flattened Options with ∆Gd < +/-1.0 dB are available (for some models and for defined input optical power only). 6. Over polarization and temperature. 7. Specific ∆G can be guaranteed at a single specified Input Optical Power Level ( Pin = Pt + Pp) equal or different from 0 dBm. 8. If input power monitoring and input isolation are required then typical NF (for all units @ Pin = 0 dBm) < 5 dB. General and Mechanical Specifications Parameter Min Typ Max Units 1532 - 1565 nm Standard 0 - 50 °C Standard* Storage Temperature -40 - 85 °C Standard Operating Humidity Operating Wavelength Operating Case Temperature Comments 20 - 85 % Non-Condensing Voltage Supply Range - +12/+5/+3.3 - VDC All Versions** Optical Connectors - SC; FC; E2000 - - APC Only 70 x 90 x 15 - mm All Versions 2.75 x 3.5 x .59 - in Dimensions *Extended temperature range of - 40°C to +75°C is also possible **Transient Pulse to +X.X VDC + 5% for < 100 msec Note: Electrical power must be applied to the unit (with no Pin monitoring) only after launching input optical signal © 2014 EMCORE Corporation | REV 2014.03 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Optiva OTS-2O Series EDFA Micro Erbium Doped Fiber Amplifier DATASHEET | MARCH 2014 SATCOM Outline Drawing (dimensions are in inches & mm) Compliance and Reliability Information FCC: Subpart B. Part 15 Class "A": Unintentional Radiators EN 55013: Sound and Television Broadcast receivers and associated equipment - Radio disturbance characteristics - limits and methods of measurements - Electric Field Radiation Emissions (2001) Fit Rate: 90% level of confidence - 290 @ 25°C © 2014 EMCORE Corporation | REV 2014.03 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Optiva OTS-2O Series EDFA Micro Erbium Doped Fiber Amplifier DATASHEET | MARCH 2014 SATCOM Ordering Information OTS - 2O - X X X X - Y Y Y - Z Z GF/NF Options (ZZ) Power Level (XXXX) Connector Option (YYY) 1400 - 14 dBm SA - SC/APC 00 - Standard 1700 - 17 dBm SC - SC/PC 01 - Gain Flattened 2000 - 20 dBm FA - FC/APC 2300 - 23 dBm FC- FC/PC E2A - E2000/APC E2C - E2000/PC Example: OTS-2O-1400-SC-00: 14 dBm gain block with SC/APC optical connectors, standard GF/NF Note: Only some models can be ordered with Gain Flattened options (-01 suffixes). Please contact your Sales Representative for details. Laser Safety This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IIIb laser product based on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the fiber network such that there is no accessible laser radiation and would meet the requirments for a Class 1 laser product. Wavelength = 1532 ~ 1565 nm (dependent on input source) Maximum Output Power = 0.2 W (single output, 23 dBm model) © 2014 EMCORE Corporation | REV 2014.03 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.