Optiva OTS-RSU-1:4 3 GHz Wideband RF Redundancy Switch DATASHEET | FEBRUARY 2014 SATCOM The Optiva OTS-RSU-1:4 3 GHz Wideband RF Redundancy Switch is optimized to perform in the 10 MHz to 3 GHz frequency range. The OTS-RSU series supports satellite signal transport link redundancy applications for 1x4 redundant switch configurations when integrated with Optiva RF fiber optic transmitters and receivers. The Optiva Wideband RF Redundancy Switch is SNMP compliant. It can be housed in the same chassis and monitored by the same Network Management System (NMS) as Optiva HD video, audio, serial data, and USB extension / distribution cards. Applications System Design RF Redundant Link The Optiva platform includes a wide range fiber optic transport products for satellite and microwave communications from 1 MHz to 40 GHz. These units can be used to construct Features transparent inter- and intra-facility links from 1 meter to >100 km for RF and 10 MHz to 3 GHz Satellite Signals 1x4 Switch Configuration 50 & 75 Ohm BNC or 50 Ohm SMA Dedicated Comm-Link for Rapid Switching Response Automatic and Manual Redundancy Modes Manual Position/Enable Select Button microwave signal transport, antenna remoting, video transport, electronic warfare systems and other high-dynamic-range applications. Optiva is a completely modular, hot-swappable platform. Both 19” rack-mount and compact tabletop, or wall-mountable enclosures are available. The 3 RU 19” rack-mount, fan-cooled enclosure OT-CC-16F can support an entire 1x4 system and utilizes two dual-redundant, hot-swappable, 200 watt power supplies. OT-CC-16F Enclosure Channel Status and Switch Position LED SNMP Monitoring and Control LNB Power Pass-Through Hot Swap Redundant Power Supplies Virtually Eliminate Downtime 16 Slot Enclosure Available CE & CSA Certified Device, RoHS Compliant © 2014 EMCORE Corporation | REV 2014.02 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Optiva OTS-RSU-1:4 3 GHz Wideband RF Redundancy Switch DATASHEET | FEBRUARY 2014 SATCOM Performance Highlights Parameter S21 Plot Min Typical Max Units 50 ohm 10 - 3000 MHz 75 ohm 10 - 2500 MHz - - 4.5 dB Isolation OTS-RSU-x 50 - - dB Return Loss OTS-RSU-x 12 - - dB Input IP3 OTS-RSU-1, OTS-RSU-4 40 - - dB - 250 380 - mA mA Frequency Range Insertion Loss OTS-RSU-1, OTS-RSU-4 DC Electrical (at 12 VDC) OTS-RSU-1 OTS-RSU-4 S11 Plot OTS-RSU-1:4 OTS-RSU-1:4 3.16 in (80.3 mm) (4 widths) 5.06 in. 128 mm 3 RU © 2014 EMCORE Corporation | REV 2014.02 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. Optiva OTS-RSU-1:4 3 GHz Wideband RF Redundancy Switch DATASHEET | FEBRUARY 2014 SATCOM Block Diagram Ordering Information Product Code Specifications OTS-RSU-4T-S5 RSU, 1x4, Tx, Optiva, 10-3000 MHz, 50 Ohm, SMA OTS-RSU-4T-S5-SS RSU, 1x4, Tx, Optiva, 10-3000 MHz, 50 Ohm, SMA, Five SMA/SMA cables OTS-RSU-4T-S5-SB RSU, 1x4, Tx, Optiva, 10-3000 MHz, 50 Ohm, SMA, Five SMA/BNC cables OTS-RSU-4R-S5 RSU, 1x4, Rx, Optiva, 10-3000 MHz, 50 Ohm, SMA OTS-RSU-4R-S5-SS RSU, 1x4, Rx, Optiva, 10-3000 MHz, 50 Ohm, SMA, Five SMA/SMA cables OTS-RSU-4R-S5-SB RSU, 1x4, Rx, Optiva, 10-3000 MHz, 50 Ohm, SMA, Five SMA/BNC cables OTS-RSU-4T-B5 RSU, 1x4, Tx, Optiva, 10-3000 MHz, 50 Ohm, BNC OTS-RSU-4T-B5-BB RSU, 1x4, Tx, Optiva, 10-3000 MHz, 50 Ohm, BNC, Five BNC/BNC cables OTS-RSU-4R-B5 RSU, 1x4, Rx, Optiva, 10-3000 MHz, 50 Ohm, BNC OTS-RSU-4R-B5-BB RSU, 1x4, Rx, Optiva, 10-3000 MHz, 50 Ohm, BNC, Five BNC/BNC cables OTS-RSU-4T-B7 RSU, 1x4, Tx, Optiva, 10-2500 MHz, 75 Ohm, BNC OTS-RSU-4T-B7-BB RSU, 1x4, Tx, Optiva, 10-2500 MHz, 75 Ohm, BNC, Five BNC/BNC cables OTS-RSU-4R-B7 RSU, 1x4, Rx, Optiva, 10-2500 MHz, 75 Ohm, BNC OTS-RSU-4R-B7-BB RSU, 1x4, Rx, Optiva, 10-2500 MHz, 75 Ohm, BNC, Five BNC/BNC cables OPV-CTLR-IC NMS SNMP Controller Card and MIB for Optiva Family OTP-1GETR-xx Optical Tcvr, 1 CH, 10/100/1000 Ethernet over fiber, SM, LC - See OTP-1GETR Data Sheets for Exact Models OTP-1ETR-A2/A2 Optical Tcvr, 1 CH, 10/100 Ethernet over fiber, SM, Dual LC - See OTP-1E Data Sheet for Exact Models OT-CC-16F-XXX Chassis, Rack-Mount, 16 Slot, 3 RU -- See OT-CC-16F Data Sheet for Exact Models PS-200F-XX Power Supply, 12 VDC, 100 to 240 VAC, 50/60 Hz, (Specify power cord (NA, EU, UK)) - See PS-200F-XX Data Sheet for Exact Models © 2014 EMCORE Corporation | REV 2014.02 +1 626-293-3400 [email protected] www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.