SWIFT™ Intelligent Wireless Detectors Description SWIFT™ (Smart Wireless Integrated Fire Technology) wireless detectors are intelligent (addressable) detectors that provide secure, reliable communication to the Fire Alarm Control Panel (FACP) using a Class A, mesh network. Wireless detectors can be used in the following types of conditions, where it is costly, obtrusive, or possibly dangerous to use traditional wired devices. • concrete walls/ceilings • surface-mount conduit • buried wires • asbestos In addition, both wired and wireless devices can be present on the same FACP providing an integrated, wired-wireless solution to offer increased installation potential. The mesh network (within the SWIFT System) creates a child-parent relationship (for example, backup communication) between the devices, so that each device has two parents providing a secondary path to transmit communications on every device. If one device can no longer operate for any reason, the remaining devices can continue to communicate directly with each other, or they can communicate through one or more intermediate devices. After an initial mesh network is formed, mesh restructuring automatically occurs. The mesh restructuring locates the strongest paths possible within the network. The SWIFT System also engages frequency hopping to prevent system interference whether intentional or accidental. The operation of each device is subject to the following conditions in compliance with the FCC Standards, Part 15. 1. The device may not cause harmful interference. 2. The device must accept any interference received including interference that may cause undesired operation. The SWIFT detection line includes the following detectors. • Photoelectric detectors - The photoelectric detectors transmit a digital representation of the smoke density through a wireless mesh that transmits to a gateway and to an FACP. • Acclimate™ standard fixed heat and rate-of-rise detectors that do the following: - Combines a photoelectric chamber and a 135° F fixed temperature heat detector. - Transmits an alarm signal due to heat in compliance with UL® Standard 521. - Uses sensors designed for an open area protection with 50 foot spacing capability as approved by UL Standard 521. SWIFT, Smart Wireless Integrated Fire Technology SWIFT Intelligent Wireless Detectors Features • Complies with UL® Standard 864 Listing. • Connects to the E3 Series® or S3 Series fire alarm control panels. • Supports up to 50 wireless devices per gateway, up to 200 wireless devices total per panel. • Uses redundant wireless mesh technology to support Class A survivability. • Employs frequency hopping to eliminate outside interferences. • Engages each device to act as a signal repeater/ booster, avoiding large and costly separate repeater units. • Combines mixed wired System Sensor devices and wireless devices on the same SLC loop. • Includes multi-device alarm activation. • Designed with tamper-proof construction. • Has addressable code wheels. • Provides alarm verification, variable sensitivity, and automatic drift compensation. • Applies low battery, signal pre-warning. SIGNALING FM E3 Series® is a registered trademark and SWIFT™ and Acclimate™ are trademarks of Honeywell International Inc. UL® is a registered trademark of Underwriter’s Laboratories Inc. APPROVED S1949 3053714 7254-1703:0178 7272-1703:0179 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. www.gamewell-fci.com 9021-60818 Rev. C page 1 of 2 ©2014 by Honeywell International Inc. All rights reserved. DEVICE 4 E3 OR S3 FACP DEVICE 1 GATEWAY U DRIVER DEVICE 5 DEVICE 3 ANNUNCIATOR USB Note: An optional USB wireless transceiver that communicates with the GATEWAY and SWIFT Tools software aids in the site survey, mesh formation, and diagnostics of the system. PARENT DEVICE 2 CHILD SWIFT TOOLS Description (Continued) Figure 1 SWIFT Mesh Network All sensors offer addressable code wheels and two LEDs. The LEDs are controlled by the panels. Operational modes include red, green and amber colors with various solid or blink patterns. The devices transmit communication signals across the mesh network through a gateway to the FACP. Some systems may require a user interface and annunciator to display wireless specific messages. The FACP identifies the SWIFT wireless device as another addressable device on the system providing similar detection functions and outputs as a wired counterpart. In addition, both wired and wireless devices can be present on the same FACP to meet the needs of a given application. A SWIFT wireless System can use any combination of modules, smoke or heat detectors. SWIFT Intelligent Wireless Detectors Specifications Physical/Operating Specifications Height: 2.4 inches (61mm) installed in B210W base Diameter: 6.0 inches (152 mm) installed in B210W base Device Weight 9.2 oz (261 g) installed in B210W (includes 4 batteries): base Operating Temperature Range: Photo: 32°F to 120°F (0°C to 49°C) Air Velocity: 0 - 4000 ft/min. Operating Humidity Range:10% to 93% non-condensing Thermal Ratings: Rate-of-Rise Detection: 15°F/min. (8.3°C/min.) Fixed Temperature Setpoint: 135°F (57°C) SWIFT Intelligent Wireless Detectors Specifications (Continued) Electrical Specifications Maximum Operating Voltage: 3.3 VDC Maximum Standby Current: 210 µA @ 3.3 VDC (one communication every 23.8 seconds with LED blink enabled). Maximum Alarm Current (LED on): 5 mA @ 3.3 VDC (LED on) Radio Frequency Range: 902-928 MHz Battery Specifications Battery Type Battery Life Battery Replacement 4 Panasonic CR123A or 4 Duracell DL123A 1 year minimum Upon TROUBLE BATTERY LOW display and/or during annual maintenance. Ordering Information Part Number Description WSD-P Velociti Wireless Photoelectric Sensor WSD-ACCLIMATE Velociti Wireless Multi-Criteria Sensor WTD-RH Velociti Wireless Thermal Detector, Rate-Of-Rise, 135° WTD-H Velociti Wireless Thermal Detector, Fixed Temp, 135° Base: B210W Wireless 6” flanged Base includes a built-in magnet for wireless devices, installation and tamper states. Accessory: W-USB SWIFT Tools USB Adapter * Note: Consult with the Fire Alarm Control Panel Manufacturer to obtain the complete system requirements. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118 9021-60818 Rev. C page 2 of 2 www.gamewell-fci.com