Zareba Sensepoint Pro Comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres Sensepoint Pro One-Stop Shop • • • Flammable, toxic and oxygen versions available Suitable for indoor or outdoor use IP65 as standard Proven Sensor Technology • • • • SurecellTM electrochemical sensors Poison resistant catalytic bead Fast and reliable Typical 2 to 5 years operational life Global Certifications* • • • US, Canada and Europe Compliant with UL, CSA and ATEX standards Includes hazardous area AND performance approval Convenient to Use • • • • Backlit LCD for dark environments Fully configurable via IR remote control 4-20mA and relay operation Auto-inhibit during maintenance Cost Effective • • • • Minimal training required Non-intrusive, one-man operation Plug-in sensor replacement All necessary accessories included Friendly Installation • • • Universal mounting bracket 3⁄4” NPT and M20 entries included as standard Suitable for conduit or SWA cable/ glands installations Range of Accessories • • • Flow adaptor Duct mounting kit Collecting cone *Pending - Contact Honeywell Analytics for more information The Sensepoint Pro provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both in and out of doors. Users can modify detector operation using the remote control provided without ever needing to open the unit. This enables one man, non-intrusive, operation and reduces routine maintenance time and costs. All detectors are supplied pre-configured and include two programmable alarm relays as well as an industry standard 4-20mA output. The scale, range, calibration, relay operation and alarm set points of the detector may all be adjusted via the transmitters’ backlit LCD and an intrinsically safe remote control that is also suitable for use in potentially explosive atmospheres. Outputs are automatically inhibited during adjustment thereby reducing the risk of false alarm at the control panel during maintenance. Sensepoint Pro is supplied with all necessary accessories for easy installation. The detector can be mounted on a wall or round support pole using the universal bracket provided. The detector is ideal for use with either conduit or steel wire armored cable and glands. A 3/4”NPT entry and M20 adaptor are included as standard. A weatherproof cap is also included for use in the harshest outdoor conditions. Overall, the Sensepoint Pro ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using an easy to replace plug-in sensor, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors and patented SurecellTM toxic sensor technology. Sensepoint Pro meets the more demanding user requirements but assures you of the most cost effective solution to your gas detection needs in the long run. Installation Details Installation Details Sensepoint Pro is designed for use in potentially explosive atmospheres. As such, installation should follow national guidelines using suitably approved steel wire armored cable and glands (M20 or 3/4”NPT) or conduit (3/4”NPT). Poie Mount Wall Mount Duct Mount Collecting Cone Use 0.5mm2 (20AWG) to 2.5mm2 (14AWG) cross sectional area cable, as needed to ensure minimum operating voltage at the detector, depending upon installed cable length. Various accessories are available for different applications. 80.0mm mm / 3.2" 104 04.0mm mm / 4.1" 150.0mm / 5.9" Electrical Connections 107.0mm mm / 4.2" 186.0mm mm / 7.3" Dimensions 36.0mm / 1.4" 20.0-80.0mm / 0.8"-3.2" 102.0mm / 4.0" Technical Summary General Specification Use 3 wire, 4-20mA, fixed point gas detector with built in alarm relays for the protection of personnel and plant from flammable, toxic and oxygen gas hazards. Incorporating transmitter with local display and fully configurable via remote handheld control Detectable Gases Gas Measuring Range Ident Name 1# F Flammable 0-100% LEL O Oxygen C Carbon Monoxide H Hydrogen Sulfide G Hydrogen 2 Operating Temperature* 3 0-25% VOL + + + SurecellTM Sensor Technology Min Max -20°C / -4°F 50°C / 122°F -15°C / 5°F 40°C / 104°F -20°C / -4°F 50°C / 122°F -20°C / -4°F 50°C / 122°F 0-1000ppm -5°C / 23°F 40°C / 104°F #Standard *Check certified temperature 0-200ppm 0-500ppm 0-50ppm 0-20ppm 0-100ppm range Electrical General 3 wire connection, 12-30Vdc, 4-20mA (source), common 0Vdc 7 x screw terminals for O.5mm2 (20AWG) to 2.5mm2 (14AWG) wire Maximum operating current: 300mA (flammable), 150mA (toxic and oxygen) Maximum peak in rush current: 600mA Signal 22mA 4-20mA 2mA or 4mA 0mA Alarm Relays 2 x 3A@240Vac alarm relays User configurable alarm trip point, normally energized/de-energized operation Link selectable output as NO or NC Maximum over range Normal operation: 0-100% full scale Output inhibited (2mA or 17.4mA for oxygen) Fault Construction Material Main body: Powder coated aluminum (ADC12) Sensor: 316 stainless steel Weatherproof cap: Aluminum, 316 stainless steel mesh Weight 1450g Certification ATEX Sensepoint Pro Ex II 2G EEx d IIC T4 (Tamb = -20°C to +50°C / -4°F to +122°F) Sensepoint Pro Remote Control ZHC1 Ex II 2G EEx ib IIC T4 (Tamb = -20°C to +50°C / -4°F to +122°F) UL Class 1, Div 1, Groups B, C, D (Tamb = -20°C to +50°C / -4°F to +122°F) Class 1, Div 1, Groups A, B, C, D (Tamb = -20°C to +50°C / -4°F to +122°F) Applicable Standards North America: UL1203 Europe: CE, ATEX, EMC (EN50270) Contact Honeywell Analytics for latest information Environmental IP Rating IP65 as standard in accordance with EN60529:1992 Operating Temperature Dependent upon gas type and certification Operating Humidity Range Continuous: 20-90%RH (non condensing), Intermittent: 10-99%RH (non condensing) Operating Pressure 90-110kPa Storage Conditions Instrument -40°C to +50°C (-40°F to +122°F) * Oxygen detection products must only be used to detect oxygen depletion in air. Ordering Information Ordering Information e.g. SP PR U X F 1 = SPPRUXF1 STANDARDS RANGE U USA (UL) 1 A Europe (ATEX) 2 3 } GAS TYPE Refer to F Flammable Detectable Gases O Oxygen Table Above C Carbon Monoxide H Hydrogen Sulfide G Hydrogen Standard Supply Each detector is supplied complete with IS remote control, 3⁄4”NPT entry, 3⁄4”NPT to M20 adaptor, wall mounting bracket, pole mounting bracket, weatherproof cap, necessary Allen keys and instruction manual all sealed in a plastic bag inside a shipping carton Shipping Details Shipping carton dimensions: L312mm (12.3”) x W223mm (8.8”) x D110mm (4.3”) Approximate weight: 1.5Kg (3.3llbs) Optional Accessories SPPPCC Collecting cone SPPPCAL Flow adaptor SPPPDM Duct mounting kit Calibration Equipment Contact Honeywell Analytics Representative As World leaders in gas detection solutions, Honeywell Analytics’ Zareba range of gas detection systems has been designed to provide efficient, practical and cost-effective equipment to protect people from a variety of forms of hazardous gas. The equipment is also simple to install and easy to operate and maintain. The Zareba range of fixed gas detection Sensepoint Sensepoint Plus Sensepoint Pro Sensepoint range Designed for industrial use, the Sensepoint range provides an easy way of ensuring legislative requirements are met. Touchpoint 1 Touchpoint 4 Touchpoint Designed for industrial use, the Touchpoint range provides an easy way of ensuring legislative requirements are met. It is particularly suited where a number of small, discrete, stand-alone systems are required. Metro Metro controller Metro For commercial environments such as car parks, municipal buildings and retail facilities, Metro offers a fully programmable, addressable gas detection system. Find out more www.honeywellanalytics.com Customer business centre Europe and the rest of the world Honeywell Analytics AG Wilstrasse 11-U11 CH-8610 Uster Unipoint Switzerland Tel: +41 (0)44 943 4300 Fax: +41 (0)44 943 4398 [email protected] www.honeywell.com Please Note: While every effort has been made to ensure accuracy in this publication, no responsibility can be accepted for errors or omissions. Data may change, as well as legislation, and you are strongly advised to obtain copies of the most recently issued regulations, standards, and guidelines. This publication is not intended to form the basis of a contract. © 2005 Honeywell Analytics H_Sensepoint Pro_DS0328_V1 12/05 © 2005 Honeywell Analytics 11078 Customer business center Americas Honeywell Analytics Distribution, Inc. 400 Sawgrass Corporate Pkwy Suite 100 Sunrise, FL 33325 USA Tel: +1 954 514 2700 Toll free: +1 800 538 0363 Fax: +1 954 514 2784 [email protected] Unipoint is a simple DIN rail mounted controller offering integrators a flexible and low cost solution to incorporate flammable, toxic or oxygen gas detection into their control systems. From car parks and boiler houses to analyzer shelters or crane cabs in offshore facilities.