6.5-inch VGA Display for Vehicles • Ideal for gauges, diagnostic menus and other ancillary functions • Capable of displaying three simultaneous video feeds • J1939 compliant CAN interfaces • Interface with Grayhill’s 3J Series Vehicle Display Controller • Sealed to IP67 • Optional touch screen • 5 soft keys for menu selection • Adjustable backlight on soft keys • Die cast mount or RAM mount compatible • Full color TFT • LED backlight • VGA resolution (640x480) • 16 bit color • Brightness 650 nits (measured) ENVIRONMENTAL SPECIFICATIONS Operating temperature ANSI/ASEA EP455 5.1.1 Level 2 -30°C to +65°C Storage Temperature ANSI/ASEA EP455 5.1.2 Level 2 -40°C to +85°C Thermal Shock ANSI/ASEA EP455 5.1.3 -40°C to 70°C at a rate of 4°C/min (1 hour at extremes) Altitude (Barometric Pressure) ANSI/ASEA EP455 5.2 101.3kPa to 18.6kPa Sand and Dust ANSI/ASEA EP455 5.3 24 hours with 0.88g/m3 Solar Radiation ANSI/ASEA EP455 5.4 43-75W/m2 UV Radiation (280-400nm wavelength) 300h Ingress Protection / Rain ANSI/ASEA EP455 5.6 Level 2 375 kPa and 8.3 L/min for 10 minutes @15°C water temp Humidity ANSI/ASEA EP455 5.13 96% humidity at 35°C for 240 hours Salt Fog ANSI/ASEA EP455 5.9 5% aqueous solution of NaCl @ 35°C and a pH between 6.5 and 7.2 for 48 hours Chemical resistance ISO 16750-5 EP 455 (5.8.2) See Table 1 Thermal Cycling ISO 16750-4 -40° to 85°C 2 hours at extremes change rate = 1°C/min (8 hours) repeat for 30 cycles. Your Experts in Cab Controls Grayhill specializes in the design, development and production of human interface controls, including: - Cab user interface design - Customized control panels - CAN-bus interface devices www.grayhill.com www.grayhill.com EMBEDDED COMPUTER • • • • • 416 MHz PXA270 processor 64MB SDRAM 128MB NAND program, and file system FLASH Windows CE or Linux Operating System* Real time clock with 10 year battery backup INPUT / OUTPUT • • • • • • 1 USB host port 3 CAN bus ports 3 NTSC/PAL video inputs 3 RS-232 serial ports 10/100 ethernet port Input voltage: 9VDC to 32VDC CONNECTOR • • AMP 776164-1 mating connector AMP 770520-1 or AMP 770854-1 contacts CERTIFICATE: CE MARK PART NUMBER | DESCRIPTION 3D65XK-1006 3D65TK-1006 6.5 inch VGA Display, Windows CE6 6.5 inch with touchscreen, WIN CE6 * Contact Grayhill for Linux version. DIMENSIONS 5 ] 6. ,10 65 1 [ WEIGHT 2.2 lbs. POWER CONSUMPTION MOUNTING INFO ELECTRICAL PERFORMANCE SPECIFICATIONS ELECTRICAL PERFORMANCE SPECIFICATIONS 8.5 W typical Use M6 Nut (1mm pitch) Max Torque 25 in-lbs Maximum Load ANSI / ASAE EP455 Sec 5.1.1 T(min) = -40C, T(max) = +65C Alternator Field Decay ANSI / ASAE EP455 Sec 5.11.2 Over-voltage ANSI / ASAE EP455 Sec 5.10.2 Level 1, extended to 36V ESD ANSI / ASAE EP455 Sec 5.12 Level 2 Reverse Polarity ANSI / ASAE EP455 Sec 5.10.3 extended to -36V Radiated Immunity ANSI / ASAE EP455 Sec 5.16 Level 1 Short-circuit Protection ANSI / ASAE EP455 Sec 5.10.4 extended to 36V ISO14982 Sec 6.4 Starting Profile ISO 16750-2 Sec. 4.6.3 12V, Code C / 24V Code E Broadband Radiated Emissions Battery-less Operation ANSI / ASAE EP455 Sec 5.11.3 Level 1 Narrowband Radiated Emissions ISO 14982 Sec 6.5 Load Dump ISO 7637-2 Pulse 5b Us = 174V, Ri = 2 Ohms, Td = 350mS, Us* = 70V Conducted Emissions SAE J1113-41 Switching Spikes ISO 7637-2 Pulse 3a and 3b Pulse 3a: Us = -200V, Pulse 3b: Us = 200V, 3000 reps Wire Harness Inductance ISO 7637-2 Pulse 2a Us = 50V, t1 = 5s, 60 reps Motor Shutdown Transients ISO 7637-2 Pulse 2b Us = 20V, t1 = 5s, Ri < .05 Ohms, 60 reps Wire Harness Inductance Switching ISO 7637-3 Pulse a and b Pulse a: –80V, Pulse b: 80V, Class A, 6 min. Inductive Load Switching ANSI / ASAE EP455 Sec 5.11.4 Level 1 Mutual Coupling (Power) ANSI / ASAE EP455 Sec 5.11.6.1 Level 2 Mutual Coupling (Signal/ Input) ANSI / ASAE EP455 Sec 5.11.6.2 (CONTINUED) Class 2 MECHANICAL PERFORMANCE Vibration, Random ANSI/ASAE EP455 5.15.1 2h each axis @52.4m/s2 RMS overall acceleration and spectral power density of 2m2/ s3 from 50Hz to 2000Hz Vibration, Sinusoidal ANSI/ASAE EP455 5.15.2 A logarithmic sweep from 10Hz to 2000Hz to 10Hz over a period of 20 minutes for 4 hours in each of 3 orthogonal axes with amplitude 1.5mm from 10Hz to 40Hz and a constant acceleration of 35m/s2 RMS from 40Hz to 2KHz Shock / Crash Safety ANSI/ASAE EP455 5.14 11ms half sine pulse of 490 m/s2 in 3 perpendicular axes Drop ANSI/ASAE EP455 5.14.2 Level 1 Drop component 400 mm onto a hardwood benchtop on all practical edges. specifications subject to change Grayhill, Inc. 561 Hillgrove Avenue LaGrange, Illinois 60525 www.grayhill.com www.grayhill.com www.grayhill.com phone: (708) 354-1040 fax: (708) 354-2820 Bulletin 1129 Rev 06/14