3D32HK-200 - Grayhill, Inc.

Graphic MicroDisplay
• Easily display custom graphic icons,
text boxes and active gauge elements.
- Use PC-based software tools
to develop graphic objects
- Store graphic objects in on-board flash memory
- Recall objects at run
time via J1939 commands
- Recall objects at run time
using the menu object
- Recall objects at run time
using the screen list object
• Controlled via J1939 PGNs
The MicroDisplay makes it easy to create screens with custom graphics, text
and even gauges that automatically adjust based on J1939 values.
Due to its innovative design, native coding is not required for custom user
interfaces. Screens and graphic objects are created with the included PC
software tool and stored in the on-board flash memory.
When in use the MicroDisplay can be controlled two different ways. First, a
vehicle’s ECU (Electrical Control Unit) can send and receive commands to control the display. Second, with the new Menu Object and Screen List Object the
display can be programmed to provide stand-alone functionality. The menu
object allows users to enter and navigate a menu using the menu key. The
Screen List Object allows users to quickly navigate through favorite screens
(objects) by pressing one of the right and left arrow buttons.
ENVIRONMENTAL SPECIFICATIONS
Operating temperature
ANSI/ASAE EP455 5.1.1
Level 2: -50°C to +85°C with optional heater
-25°C to +85°C without heater
Storage Temperature
ANSI/ASAE EP455 5.1.2
Level 2: -50°C to +85°C
Thermal Shock
ANSI/ASAE EP455 5.1.3
-40°C to 70°C at a rate of 4°C/min (1 hour at extremes)
Altitude (Barometric Pressure)
ANSI/ASAE EP455 5.2
101.3kPa to 18.6kPa
Sand and Dust
SAE J1455
Solar Radiation
ISO 4892-2
Method B
Wash Down
ANSI/ASAE EP455 5.6
Level 2
Humidity
ANSI/ASAE EP455 5.13
96% humidity at 35°C for 240 hours
Salt Fog
ANSI/ASAE EP455 5.9
5% aqueous solution of NaCl @ 35°C and
a pH between 6.5 and 7.2 for 48 hours
Chemical resistance
ISO 16750-5 EP 455 5.8.2
Ingress Protection
IP67
with mating connector
Your Experts in Cab Controls
Grayhill specializes in the design, development and production
of human interface controls, including:
- Cab user interface design
- Customized control panels
- CAN-bus interface devices
www.grayhill.com
www.grayhill.com
- Native coding not required
• Ideal for off-highway vehicle
applications
- Virtual gauges
- Diagnostic menus
- Fault indicators & service reminders
• Rated for off-highway vehicles
- Extended operating temperature range: -50º C to +85ºC (with heater)
- Protected against the ingress of liquids and dust: IP67 rated seal
• 3.2-inch backlit LCD (256x128)
- Excellent daylight readability
- Transflective LCD with anti-glare
- Software controlled RGB backlighting
- Four level grayscale graphics
• Custom Options Available
- Keypad backlight color
- Key colors and legends
- Icons/screens pre-loaded
• System Interface
- One CAN-bus port
- Two 200mA outputs (standard option)
- Three discrete inputs (standard option
- One RS-485 serial port (custom option)
• Styled to sit next to Grayhill
standard 20-button 3K Keypad
DIMENSIONS
3.2 8]
,2
[81
ELECTRICAL PERFORMANCE SPECIFICATIONS
ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS
Maximum load
ANSI/ASAE EP455 5.1.1
Level 2
ESD
ANSI/ASAE EP455 5.12
Level 1 +/- 25KV
Jump start voltage
EP455 5.10.2
36V for 60 minutes; -36V for 60 minutes
Radiated Immunity
EP455 5.16
Level 1
Short circuit protection
EP455 5.10.4
36V
Conducted emissions
SAE J1113-41
Level 4
Reverse polarity
protection
EP455 5.10.3
-36V
Radiated emissions
ISO14982
Starting profile
ISO 16750-2
Level II code C, Level IV code A
Battery-less operation
ANSI/ASAE EP455 5.11.3
Level 2
Load dump
ISO 7637-2 Test Pulse 5b
Us* = 60V
Switching spikes
ISO 7637-2 Test Pulse 3a
and 3b
Wire harness inductance
ISO 7637-2 Test Pulse 2a
and 2b
Wire harness inductanceswitching
ISO 7637-3 Test Pulse
a and b
Inductive load pulse
ANSI/ASAE EP455 5.11.4
Mutual coupling
ANSI/ASAE EP455 5.11.6
Level 2
Alternator field decay
ANSI/ASAE EP455 5.11.2
PART NUMBER
3D32XK-200
3D32HK-200
3D32XKR-200
3D32HKR-200
3D32CABLE-1
CE COMPLIANCE
EMC
EN 13309:2010
ESA
MECHANICAL PERFORMANCE
DESCRIPTION
MicroDisplay with CAN, I/O
MicroDisplay with CAN, I/O and heater
MicroDisplay with CAN
MicroDisplay with CAN and heater
MicroDisplay Programming Cable
with Power Supply
Vibration, Random
ANSI/ASAE EP455
5.15.1
2h each axis @52.4m/s2 RMS overall
acceleration and spectral power density of
2m2/s3 from 50Hz to 2000Hz
Vibration, Sinusoidal
ANSI/ASAE EP455
5.15.2
A logarithmic sweep from 10Hz to 2000Hz to
10Hz over a period of 20 minutes for 4 hours
in each of 3 orthogonal axes with amplitude
1.5mm from 10Hz to 40Hz and a constant
acceleration of 35m/s2 RMS from 40Hz to 2KHz
Shock / Crash Safety
ANSI/ASAE EP455 5.14
11ms half sine pulse of 490 m/s2 in 3
perpendicular axes
Drop
ANSI/ASAE EP455
5.14.2 Level 1
Drop component 400 mm onto a hardwood
benchtop on all practical edges.
specifications subject to change
MOUNTING INFO
Use M6 Nut (1mm pitch)
Max Torque 25 in-lbs
REAR CONNECTOR
CONTACT GRAYHILL FOR CUSTOM OPTIONS
Mating Connector: DEUTSCH DT06-12SA
Grayhill, Inc.
561 Hillgrove Avenue
phone: (708) 354-1040
LaGrange, Illinois 60525 fax: (708) 354-2820
www.grayhill.com
www.grayhill.com
www.grayhill.com
Bulletin 1144
Rev 06/14
0
Function
1
V in Positive
2
V Return
3
RS-485 +
4
RS-485 -
5
Digital in 1
6
Digital in 2
7
Digital in 3
8
Digital out 1
9
Digital out 2
10
CAN shield
11
CAN HI
12
CAN LOW