HTC Korea CONTROLLED DOCUMENT DO NOT MAKE COPY TAEJIN TECHNOLOGY CO.,LTD. TAPE & REEL SPEC SPEC No. No. of Pages HTC-ES-PO 1/2 Product Name - Subcategory - Document No. - Revision No. 01 Issue Date Jul 12, 2008. Originator Hyun-hwa Kim Package Name TO-252 Taping Specification Notice: 1. 10 Sprocket hole pitch cumulative tolerance is ±0.20mm. 2. Carrier camber shall be rot more than 1mm per 100mm through a length of 250mm. 3. Ao & Bo measured on the plane except corner radii. 4. Ko measured from a place on the inside bottom of the pocket to top surface of carrier. 5. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. (unit:mm) SYMBOL Ao Bo Ko Po P1 SPEC 6.74 ± 0.10 10.24 ± 0.10 2.70 ± 0.10 4.0 ± 0.10 8.0 ± 0.10 SYMBOL P2 T E F Do SPEC 2.0 ± 0.10 0.30 ± 0.05 1.75 ± 0.10 7.50 ± 0.10 1.55 ± 0.05 SYMBOL D1 W 10Po K1 B1 SPEC 1.50 Min. 16.0 ± 0.20 40.0 ± 0.20 2.50 ± 0.10 7.30 ± 0.10 Remarks The information of this document is the exclusive property of TAEJIN Technology Co., Ltd. And shall be kept confidential. Do not disclose, reproduce, or distribute this information without prior written permission of TAEJIN Technology Co., Ltd. HTC Korea CONTROLLED DOCUMENT DO NOT MAKE COPY TAEJIN TECHNOLOGY CO.,LTD. TAPE & REEL SPEC SPEC No. No. of Pages HTC-ES-PO 2/2 Product Name - Subcategory - Document No. - Revision No. 01 Issue Date Jul 12, 2008. Originator Hyun-hwa Kim Package Name TO-252 REEL Specification (Unit:mm) SYMBOL A B SPEC 330.0±2.0 1.50 Min. C 13.0 (+0.5 / -0.2) D N 20.20 Min. 50.0 Min W 16.40 (+2.0 / -0.0) Remarks The information of this document is the exclusive property of TAEJIN Technology Co., Ltd. And shall be kept confidential. Do not disclose, reproduce, or distribute this information without prior written permission of TAEJIN Technology Co., Ltd.