Data Sheet Mechanical Drawing 10.92 MAX IN08048 YYWW ICE Components, Inc. Tel 678-560-9172 Fax 678-560-9304 [email protected] www.icecomponents.com 1165 Allgood Rd., Ste. #20, Marietta, GA 30062 7.2 MAX Customer Part Number Revision Description Date Reference Doc Control # Issue(For ICE use only) Item Inductance @0Adc 7.5 MAX General Information 0.1 max IN08048 1 for coplanarity Inductor (a) AUG-07-2009 2.5 +/- 0.2(x2) ---Specification Pins Spec Test Condition S-F Inductance @Isat at 25degC S - F 280 nH +/- 15% 190 nH min DCR S-F Isat at 25degC S-F 33 Adc max Isat at +125degC S-F 25 Adc max Idc S-F 45 Adc max 1.6 +/- 0.1 (b) unit:mm Sample Test Data 100 kHz, 1Vrms, series 100 kHz, 1Vrms, series (33 Adc) 0.29 mOhm +/- 10% +25 deg C Recommended PCB Layout Schematic Remark 1. S 3.5 11.2 F Isat is the current at which the inductance drops by 20%. 2. Idc is the current at which the temperature of the part increases by 50 deg C. 2.5 3. Inductance vs. Current Curve and Temperature vs. Current Curve as attached. unit:mm 4. The nominal DCR is measured from point (a) to point (b), as shown on the mechanical drawing. 5. This is RoHS compliant product. 6. The max operating temperature is 130degC (ambient + temperature rise). Sample approval is required before release to production. Sample specifications take precedence over customer specifications. Rev. 1 Description Initial release PRD CHK Emily Gary APP Date NTFY L. L. Chou 2009/8/7 2009/8/7 __________________________ Customer Signature FORM NO. : I10105-02 PAGE 1 OF 2 P/N: IN08048 Inductance vs. Current 100.0 +25 degC 80.0 70.0 +125 degC 60.0 50.0 40.0 0 3 6 9 12 15 18 21 24 27 30 33 36 Current (A) Temperature VS Current Temperature(degC) % Inductance 90.0 100.0 80.0 60.0 40.0 20.0 0.0 0 5 10 15 20 25 30 35 40 45 50 Current (DC) PAGE 2 OF 2