Interactive Catalog Replaces Catalog Pages Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical information than ever before. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 Click this icon to try the new Interactive Catalog. Solid State Hall Effect Position Sensors FEATURES • 3.8 to 30 VDC supply voltage • Digital current sinking output • Snap-in or flat mount packages • Quad-Hall design eliminates stress effects • Temperature compensated magnetics • Bipolar, unipolar and latching magnetics • High output capability, 50mA absolute maximum • Operating temperature range -40C to +150C • Varying leadwire lengths of 24 AWG Radox wire WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Sensing and Control SR13/15 Series The newly introduced SR13/15 Series package enhancements permit quick and easy sensor installation, increasing the usability of the SS400 Series. These devices can be installed without additional mounting hardware. The snap-in and flat mount sensor packages can house any of the present SS400 Series sensors or any similarly sized sensing elements. The packages also provide varying 24AWG Radox leadwire lengths or connector capabilities. The SS400 Series position sensors have a thermally balanced integrated circuit that provides predictable performance for the -40C to +150C operating temperature range. The SS400 Series band gap regulation provides stable operation over 3.8 to 30 VDC. Current consumption is 10 mA at +40C ambient temperature. SS400 Series sensors are capable of continuous 20 mA sinking output. The sensors may be cycled as high as 50 mA maximum. Bipolar, unipolar and latching magnetics are available. WARNING MISUSE OF DOCUMENTATION • The information presented in this product sheet is for reference only. Do not use this document as product installation information. • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Solid State Hall Effect Position Sensor SR13/15 Series OPERATING CHARACTERISTICS –40°C TO 125°C, 3.8 TO 30 VDC Supply voltage Min. 3.8 Typ. Max. 30 Remarks VDC Current consumption 13 mA Output voltage (operated) 0.40 Sinking 10 mA max. Sink current (operated) 20 mA Output leakage current (released) 5 µA VOUT = 30 VDC, VCC = 30 VDC Output switching time Rise, 10 to 90% 1.5 µs. 1.5 µs VCC = 12 V, RL = 1.6 KΩ, CL = 20 pF 15 µs 1.5 µs Fall, 90 to 10% -40°C to +150°C (-40°F to +302°F) Operating Temperature MAGNETIC CHARACTERISTICS Magnetic Type 25°C Max. Op. Min. Rel. Min. Dif. -20°C to 85°C Max. Op. Min. Rel. Min. Dif. SR13C-A1 Unipolar SR13D-A1 Unipolar SR13F-A1 Unipolar SR13R-A1 Latching SR15C-A3 Unipolar 180 75 25 115 20 20 390 235 30 85 -85 50 180 75 25 215 60 10 135 15 8 435 200 30 110 -110 50 215 60 10 NOTICE Bipolar Hall effect sensors may have an initial output in either the On or Off state if powered up with an applied magnetic field in the differential zone (applied magnetic field > Brp and < Bop). Honeywell recommends allowing 10 µs for output voltage to stabilize after supply voltage has reached 5 volts. BLOCK CIRCUIT WIRING DIAGRAM Vs (+) HALL SENSOR TRIGGER CIRCUIT AND AMPLIFIER OUTPUT (O) N. H. GROUND (-) 2 Honeywell • Sensing and Control For application help: call 1-800-537-6945 Solid State Hall Effect Position Sensors SR13/15 Series MOUNTING DIMENSIONS (for reference only) mm/in SNAP-IN DIGITAL POSITION SENSOR (SR13C-A1, SR13D-A21, SR13F-A1, SR13R-A1) To Sensor Face ASSEMBLED IN MEXICO C.L. of Sensor 0,5 0.02 2,5 0.10 4,8 0.19 7,6 0.30 2,5 0.10 2,3 0.09 11,30 0.445 5,80 0.23 3,43 0.135 3,8 0.15 20,3 0.80 3 X 152,4 6.00 3 X 5,1 0.20 6,4 0.25 Red(+) Green(O) Black(-) 5,1 0.20 FLAT MOUNT DIGITAL POSITION SENSOR (SR15C-A3) To Sensor Face ASSEMBLED IN MEXICO C.L. of Sensor 7,6 0.30 0,5 0.02 2,5 0.10 20,3 0.80 3 X 5,1 0.20 3 X 254,0 10.00 3,8 0.15 Red(+) Green(O) Black(-) 5,1 0.20 For application help: call 1-800-537-6945 Honeywell • Sensing and Control 3 Solid State Hall Effect Position Sensors SR13/15 Series SUGGESTED MOUNTING DETAIL 3,17 0.12 2,8 0.11 11,3 0.44 5,1 0.20 WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032 www.honeywell.com/sensing Printed with Soy Ink on 50% Recycled Paper 005842-1-EN IL50 GLO 999 Printed in USA For application assistance, current specifications, or name of the nearest Authorized Distributor, contact a nearby sales office. Or call: 1-800-537-6945 USA 1-800-737-3360 Canada 1-815-235-6847 International FAX 1-815-235-6545 USA INTERNET www.honeywell.com/sensing [email protected]