Designed and Manufactured in Germany Rev.: 3 Specification AXIS30-18 Oscillator type: Wideband VCXO Date: 2014-07-07 Replaces AXIS30-50-G Parameter min. max. Unit Frequency range Standard frequencies 10 66 17.500 / 28.375 / 29.500 / 32.000 / 40.000 / 53.125 / 66.000 MHz MHz Frequency stability Initial tolerance @ 25°C vs. temperature in operating temperature range (steady state) vs. supply voltage variation vs. load change long term (aging) per year Frequency adjustment range Mechanical (internal trimmer) Electronic Frequency Control (EFC) range EFC voltage VC EFC slope (∆f / ∆VC) EFC linearity EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Operable temperature range Storage temperature range Enclosure (see drawing) L x W x H Weight Marking Packing Handling and Testing Processing typ. Condition -50 -45 +100 45 ppm ppm ppm @ VC = 2.5 V -40° ~ +85°C -5 -2 -3 5 2 3 ppm ppm ppm @ 40°C after 30 days ppm ppm ±500 0.25 2.5 positive 4.75 N.A. V % kΩ 100 HCMOS 25 15 pF pF ns % ms V mA °C °C mm gram 10 60 4 4.75 5.0 5.25 40 -45 +90 -50 +95 14.4 x 9.5 x 6.0 max 3 AXIS30-18 Frequency wwAXyy S/N Tape & reel In accordance with AXAN-011 In accordance with AXAN-012 40 f < 20 MHz f ≥ 20 MHz @ VS/2 @ +25°C IEC 61837 CO 27 IEC 60286-3 www.axtal.com www.axtal.com Notes: 1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Ordering Code: Model (Specification) AXIS30-18 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Revision Rev.3 Frequency [MHz] 29.500 AXIS30-18 Rev.3 Drawing D1 Page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin # Symbol 1 VC 2 N.C. 3 GND 4 RF OUT 6 Vs Function Control Voltage (EFC) No Connection Ground RF Output Supply Voltage Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 2-20 2-58 4.6.3 2-27 4.6.8 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Drawing Date [dd.mm.yyyy] 0 1 1 2 2 3 3 D0 D0 D1 D0 D1 D0 D1 09.05.2003 12.03.2010 29.03.2010 28.05.2010 18.08.2010 05.05.2011 07.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Specification AXIS30 Rev.3 with Option “G” First issue AXIS30-18 Add Handling & Testing and Processing References Change marking to AXIS30-50-G Add “LxWxH” to Enclosure size Change marking back to AXIS30-18 Editorial changes AXIS30-18 Rev.3 Drawing D1 Page 2(2) Author Checked BN BN BN BN BN BN HH BN BN BN BN BN BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]