Designed and Manufactured in Germany Specification Oscillator type: Rev.: 3 Date: 2014-04-05 AXIS45 Wide-pull VCXO in double-sealed DIL14 package Direct replacement for Fujitsu M2 (F100) Parameter min. max. Unit Frequency range Standard frequencies 10 90 12.288 / 16.384 / 22.579 / 24.576 / 27.000 / 28.224 MHz Frequency stability vs. operating temperature range vs. supply voltage variation vs. load change st Long term (aging) 1 year Long term (aging) following years Frequency adjustment range Electronic Frequency Control (EFC) (Note 4) EFC voltage VC (Note 4) EFC slope (∆f / ∆VC) EFC input impedance RF output Signal waveform Load Rise & decay time Symmetry (duty cycle) Start-up time Supply voltage VS Current consumption (steady state) Operating temperature range Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. 3. 4. typ. ±80 ±10 ±5 ±10 ±5 ±500 ±500 ±1000 ±1500 ±2000 ±2500 ±3000 ±4000 0.15 0.25 ±1100 ±1600 ±2100 ±2600 ±3200 3.15 4.75 Condition (Note 2) ppm ppm ppm ppm ppm ppm (Note 3) VS ±5% Load ±5% @ 40°C @ 40°C ppm ppm ppm ppm ppm ppm ppm ppm V V Option 2 = “ ” Option 2 = “500” Option 2 = “1000” Option 2 = “1500” Option 2 = “2000” Option 2 = “2500” Option 2 = “3000” Option 2 = “4000” Option 1 = “33“ Option 1 = “50” Positive 100 kΩ HCMOS 15 40 3.15 4.75 3.3 5.0 -20 10 60 4 3.45 5.25 40 +70 20.7x13.1x7.5 max. 5 Palette or Tube pF ns % ms V V mA °C mm g @ VS/2 Option 1 = “33“ Option 1 = “50” (Note 3) IEC 60679-3 CO 02 IEC 60286-3 Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated For frequencies above 30 MHz sub-harmonics may be present. Please consult factory nd Frequency vs. temperature response is a 2 order parabola with turn-over point at ≈ +20°C to +30°C Tuning range Option 2 = “1500” or higher is only possible with EFC voltage 0.25V ~ 4.75 V GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany AXIS45 Rev.3 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Control Voltage VC Storage Temperature -0.5 -0.5 -55 VS + 10% 15 +125 Unit Condition V V °C VS to GND VC to GND Ordering Code Option 1 Option 2 [Supply Voltage] [Tuning Range] AXIS45 50 2000 Example: AXIS45-50-2000_Rev.3 – 28.224 MHz Model Revision Frequency [MHz] Rev.3 28.224 Enclosure drawing Pin connections Pin # 1 7 8 14 Symbol VC GND RF OUT Vs Function Control Voltage (EFC) Ground RF Output Supply Voltage Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXIS45 Rev.3 Drawing D0 Page 2(3) HBM MM No No Source www.axtal.com www.axtal.com Condition 2000 V 200 V www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 2 3 D1 D0 01.10.2012 05.04.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks Editorial changes Major specification update AXIS45 Rev.3 Drawing D0 Page 3(3) Author Checked BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]