Specification AXGS10G-21 Oscillator type: Gated SAW

Specification
Oscillator type:
Rev.: 1
AXGS10G-21
Gated SAW Oscillator in SMD Package
Parameter
min.
Frequency Range
Standard frequencies
Frequency stability
Initial tolerance at delivery
vs. operating temperature range
operating temperature range
Long term (aging)
Gate Function
Low level input voltage VGL
High level input voltage VGH
Input resistance
Input capacitance
Turn-on time
Turn-off time
RF output
Signal waveform
Output level Gate ON @ 25°C
Output level Gate ON over operating
temperature range
Output level Gate OFF
Sub harmonics
Harmonics
Supply voltage VS
Current consumption
Gate ON
Gate OFF
Storage temperature range
Enclosure (see drawing) (LxWxH)
Weight
Handling and Testing
Processing
Mounting
typ.
max.
Unit
950
1150
1030 / 1090 / 1150
MHz
MHz
-55
3.5
0
5.0
10
15
15
ppm
@+25°C
ppm
°C
ppm/year
1.5
5.25
10
40
30
V
V
kΩ
pF
ns
ns
+8
dBm
dBm
-50
4.75
none
-35
5.0
35
10
-55
Condition
± 150
± 350
+95
±5
Sine wave
+7
+6
Date: 2013-03-04
-30
5.25
120
35
+105
dBm
dBc
dBc
V
mA
mA
°C
20.3x13.0x5.7max.
mm
10
gram
In accordance with AXAN-011
In accordance with AXAN-012
RL = 50 Ω
@ VG > +3.5 V
@ VG > +3.5 V
@ VG < +1.5 V
@ VG > +3.5 V
@ VG < +1.5 V
www.axtal.com
www.axtal.com
Notes:
1. Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated
Ordering Code (Part number):
Model (Specification)
AXGS10G-21
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
Revision
Rev.1
Frequency [MHz]
1090.000
AXGS10G-21 Rev.1
Drawing Rev.1.3
www.axtal.com
fon: +49 (6261) 939834
page 1(3)
fax: +49 (6261) 939836
E-mail: [email protected]
Enclosure drawing
Pin connections
Pin #
1
2
3
4
Symbol
VG
GND
RF OUT
VS
Function
Gating Input
Ground, case
RF Output
Supply Voltage
Recommended footprint
- Top View * recommended: place 1 nF and 1 µF blocking capacitor close to supply voltage pin
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXGS10G-21 Rev.1
Drawing Rev.1.3
www.axtal.com
fon: +49 (6261) 939834
page 2(3)
fax: +49 (6261) 939836
E-mail: [email protected]
Environmental conditions
Test
Sealing tests
(if applicable)
Solderability
Resistance to
soldering heat
Shock*
IEC 60068
Part ...
2-17
IEC 60679-1
clause ...
4.6.2
2-20
2-58
4.6.3
2-27
4.6.8
Test conditions
Gross leak: Test Qc,
Fine leak: Test Qk
Test Ta (235 ± 5)°C Method 1
Test Tb Method 1A, 5s
Vibration, sinusoidal* 2-6
4.6.7
Test Ea, 3 x per axes 100g, 6 ms
half-sine pulse
Test Fc, 30 min per axes,
10 Hz - 55 Hz 0,75mm; 55 Hz - 2
kHz, 10g
Endurance tests
- ageing
- extended aging
4.7.1
4.7.2
30 days @ 85°C, OCXO @25°C
1000h, 2000h, 8000h @85°C
Revision History
Rev.
Date
[dd.mm.yyyy]
1
1.1
1.2
1.3
30.10.2012
30.10.2012
12.02.2013
04.03.2013
Remarks
Author
First issue AXGS10G-21
Frequency 1090 MHz added
Typical values changed, editorial changes
New enclosure drawing, recommended footprint added
BN
BN
HH
HH
GmbH & Co. KG
Roemerring 9
D-74821 Mosbach
Germany
AXGS10G-21 Rev.1
Drawing Rev.1.3
www.axtal.com
fon: +49 (6261) 939834
page 3(3)
fax: +49 (6261) 939836
E-mail: [email protected]