Designed and Manufactured in Germany Specification Oscillator type: Rev.: 4 AXMW1090GYT-01 Gated 1090 MHz Microwave Oscillator Parameter min. Nominal frequency Frequency stability Initial tolerance @ +25°C vs. operating temperature range operating temperature range Long term (aging) per year RF output Signal waveform Load RL Output level @ +25°C Sub-Harmonics Harmonics Gate Function Low level input voltage VGate High level input voltage VGate Input resistance Input capacitance Turn on time Turn off time Supply voltage VS Current consumption For Secondary Radar Applications max. Unit Condition 1090.000 -40 +10 MHz ±10 ±30 +70 ±5 ppm ppm °C ppm -60 -30 -30 Ω dBm dBm dBc dBc Sine wave 50 +12 -40 -40 3.5 11.4 0 5.0 10 30 10 12.0 42 7 -55 -55 Operable temperature range Storage temperature range Enclosure (see drawing) (LxWxH) Weight Packing Reliability (Note 2) Notes: 1. 2. typ. Date: 2014-07-08 1.5 5.5 10 40 30 12.6 50 15 +85 +125 54x40x19 max. 60 Palette 633 fit / MTBF= 180 years < 10 fit V V kΩ pF ns ns V mA mA °C °C mm g @+25°C @ VGate > +3.5V @ VGate < +1.5V Multiples of 109 MHz @VGate > +3.5V @VGate < +1.5V h = 2.0 mm Operating @ +70°C Storage @ 25°C Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Calculated in accordance with IEC 61709 Ordering Code: Model (Specification) AXMW1090GYT-01 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Revision Rev.4 Frequency [MHz] 1090.000 AXMW1090GYT-01 Rev.4 Drawing D3 Page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin# 1 2 3 SMA Symbol GATE GND VS RF OUT Function Gating Input Ground Supply Voltage RF Output Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 Test conditions 2-20 2-58 4.6.3 Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s 2-27 4.6.8 Gross leak: Test Qc Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per 6 axes 50G, 11 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C *Endurance test Revision History Rev. Drawing Date [dd.mm.yyyy] 1 2 3 4 D0 D0 D0 D0 18.08.2006 18.08.2006 03.12.2007 13.12.2010 4 D1 29.01.2011 4 4 D2 D3 01.10.2012 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue Editorial changes Output, spectrum, supply & gate parameters changed Crystal frequency, RF output & Gate function parameters changed Package height H and thickness of base plate (h) changed: PCN11012901 Minor editorial changes Editorial changes AXMW1090GYT-01 Rev.4 Drawing D3 Page 2(2) Author Checked BN BN BN BN BN BN BN BN BN BN BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]