Designed and Manufactured in Germany Specification Oscillator type: Rev.: 3 AXMW1030GYT-01 Gated 1030 MHz Microwave Oscillator Parameter min. Nominal frequency Frequency stability Initial tolerance @ +25°C vs. operating temperature range operating temperature range Long term (aging) per year RF output Signal waveform Load RL Output level @ +25°C Sub-Harmonics Harmonics Gate Function Low level input voltage VGate High level input voltage VGate Input resistance Input capacitance Turn on time Turn off time Supply voltage VS Current consumption -40 +10 11.4 MHz ±10 ±30 +70 ±5 ppm ppm °C ppm -60 -30 -40 Ω dBm dBm dBc dBc Sine wave 50 +12 0 5.0 10 12.0 42 7 -55 -55 Enclosure (see drawing) (LxWxH) Weight Packing Reliability (Note 2) 2. For Secondary Radar Applications max. Unit Condition 1030.000 3.5 Operable temperature range Storage temperature range Notes: 1. typ. Date: 2014-07-08 1.5 5.5 10 30 30 12.6 50 15 +85 +125 54x40x19 max. 60 Palette 633 fit / MTBF= 180 years < 10 fit V V kΩ pF ns ns V mA mA °C °C mm g @ VGate > +3.5V @ VGate < +1.5V Multiples of 103 MHz @VGate > +3.5V @VGate < +1.5V h = 2.0 mm Operating @ +70°C Storage @ 25°C Terminology and test conditions are according to IEC standard IEC60679-1, unless otherwise stated Calculated in accordance with IEC 61709 Ordering Code: Model (Specification) AXMW1030GYT-01 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Revision Rev.3 Frequency [MHz] 1030.000 AXMW1030GYT-01 Rev.3 Drawing D3 Page 1(2) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin# 1 2 3 SMA Symbol GATE GND VS RF OUT Function Gating Input Ground Supply Voltage RF Output Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2-17 IEC 60679-1 clause ... 4.6.2 Test conditions 2-20 2-58 4.6.3 Test Ta (235 ± 5)°C Method 1 Test Tb Method 1A, 5s 2-27 4.6.8 Gross leak: Test Qc Vibration, sinusoidal* 2-6 4.6.7 Test Ea, 3 x per 6 axes 50G, 11 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Endurance tests - ageing - extended aging 4.7.1 4.7.2 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C *Endurance test Revision History Rev. Drawing Date [dd.mm.yyyy] 1 2 D0 D0 03.12.2007 13.12.2010 3 3 D0 D1 14.12.2010 29.01.2011 3 3 D2 D3 01.10.2012 08.07.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue Crystal frequency & min. supply voltage changed, editorial changes Reliability figures added Package height H and thickness of base plate (h) changed: PCN11012901 Minor editorial changes Editorial changes AXMW1030GYT-01 Rev.3 Drawing D3 Page 2(2) Author Checked BN BN BN BN BN BN BN BN BN HH BN HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]