Rev.: 1 Specification AXGS10G‐25 Oscillator type: Gated SAW Oscillator in SMD Package Parameter min. Nominal frequency Frequency stability Initial tolerance at delivery vs. operating temperature range operating temperature range Long term (aging) Gate Function Low level input voltage VGL High level input voltage VGH Input resistance Input capacitance Turn‐on time Turn‐off time RF output Signal waveform Output level Gate ON @ 25°C Output level Gate ON over operating temperature range Output level Gate OFF Sub harmonics Harmonics Supply voltage VS Current consumption Gate ON Gate OFF Storage temperature range typ. max. Unit 1150 ‐30 3.5 Condition MHz ± 150 ± 500 +75 ± 5 ppm @+25°C ppm °C ppm/year 1.5 5.25 10 40 30 V V kΩ pF ns ns +8 dBm dBm 0 5.0 10 15 15 Sine wave + 7 + 6 ‐50 4.75 Date: 2013‐10‐14 none ‐35 5.0 35 10 ‐55 ‐30 5.25 120 35 +105 dBm dBc dBc V mA mA °C RL = 50 Ω @ VG > +3.5 V @ VG > +3.5 V @ VG < +1.5 V @ VG > +3.5 V @ VG < +1.5 V Enclosure (see drawing) (LxWxH) 20.3x13.0x5.7max. mm Weight 10 gram Handling and Testing In accordance with AXAN‐011 www.axtal.com Processing In accordance with AXAN‐012 www.axtal.com Mounting Notes: 1. Terminology and test conditions are according to IEC standard IEC60679‐1, unless otherwise stated Ordering Code (Part number): Model (Specification) AXGS10G‐25 Revision Rev.1 Frequency [MHz] 1150.000 GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany AXGS10G‐25 Rev.1 Drawing Rev.1.3 www.axtal.com fon: +49 (6261) 939834 page 1(3) fax: +49 (6261) 939836 E‐mail: [email protected] Enclosure drawing Pin connections Pin # 1 2 3 4 Symbol VG GND RF OUT VS Function Gating Input Ground, case RF Output Supply Voltage Recommended footprint ‐ Top View ‐ * recommended: place 1 nF and 1 µF blocking capacitor close to supply voltage pin GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany AXGS10G‐25 Rev.1 Drawing Rev.1.3 www.axtal.com fon: +49 (6261) 939834 page 2(3) fax: +49 (6261) 939836 E‐mail: [email protected] Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part ... 2‐17 IEC 60679‐1 clause ... 4.6.2 2‐20 2‐58 4.6.3 2‐27 4.6.8 Vibration, sinusoidal* 2‐6 4.6.7 Endurance tests ‐ ageing ‐ extended aging 4.7.1 4.7.2 Test conditions Gross leak: Test Qc, Fine leak: Test Qk Test Ta (235 5)°C Method 1 Test Tb Method 1A, 5s Test Ea, 3 x per axes 100g, 6 ms half‐sine pulse Test Fc, 30 min per axes, 10 Hz ‐ 55 Hz 0,75mm; 55 Hz ‐ 2 kHz, 10g 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Revision History Rev. Date [dd.mm.yyyy] 1 13.10.2014 Remarks Author First issue AXGS10G‐25 BN GmbH & Co. KG Roemerring 9 D‐74821 Mosbach Germany AXGS10G‐25 Rev.1 Drawing Rev.1.3 www.axtal.com fon: +49 (6261) 939834 page 3(3) fax: +49 (6261) 939836 E‐mail: [email protected]