Designed and Manufactured in Germany Specification Oscillator type: Rev.: 1 AXGX90 Gated High Stability Crystal Oscillator Date: 2014-06-20 Was AXMW1030/1090GYT-01 Parameter Frequency range Standard frequencies Frequency stability Initial tolerance at delivery vs. operating temperature range Long term (aging) per year Gate function (optional) Low level input voltage VGL High level input voltage VGH Input resistance Input capacitance Turn-on time Turn-off time RF output Signal waveform Load RL Output level Gate ON Output level Gate OFF Sub-harmonics (multiples of fOUT/10) Harmonics Supply voltage VS Current consumption Gate ON Gate OFF Operating temperature range min. typ. 950 1532 1030.000 / 1090.000 MHz MHz ±10 ±30 ±5 ppm ppm ppm Option 1 0 5.0 1.5 5.5 5 30 10 10 40 30 V V kΩ pF ns ns 3.5 10 +10 Sine wave 50 +12 11.4 -40 -40 12.0 42 7 -40 Enclosure (see drawing) (LxWxH) Weight Packing Notes: 1. 2. max. Unit Condition @ +25°C -50 -30 -30 12.6 Ω dBm dBm dBc dBc V 50 15 +70 mA mA °C @ VGATE > +3.5 V @ VGATE < +1.5 V mm g h = 2.0 mm 60 54x40x19 @ VGATE > +3.5 V @ VGATE < +1.5 V (Note 2) Palette Terminology and test conditions are according to IEC60679-1 and MIL-PRF-55310, unless otherwise stated Depending on frequency multiplication factor may be higher than 10 Absolute Maximum Ratings Parameter min. max. Supply Voltage VS Gate Voltage VGATE Storage Temperature -0.5 -0.5 -55 VS + 10% 7.0 +125 Unit Condition V V °C VS to GND VGATE to GND Ordering Code Option 1 Revision [Gate Function] AXGX90 G = With Gate function Rev.1 Blank = No Gate function Example: AXGX90G_Rev.1 – 1030.000 MHz Model GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Frequency [MHz] 1030.000 AXGX90 Rev.1 Drawing D0 Page 1(3) www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Enclosure drawing Pin connections Pin# Symbol 1 VGATE 2 GND 3 VS SMA RF OUT Function Gate Input Ground Supply Voltage RF Output Handling and Testing Parameter Procedure Handling and Testing Processing Parameter Source Application Note AXAN-011 Application Note AXAN-012 Procedure Electrostatic discharge (ESD) THD devices SMD devices Washable RoHS compliant GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany IEC60749-26 IEC60749-27 Yes Yes AXGX90 Rev.1 Drawing D0 Page 2(3) www.axtal.com www.axtal.com Condition HBM MM 2000 V 200 V No No www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected] Designed and Manufactured in Germany Environmental conditions Test Sealing tests (if applicable) Solderability Resistance to soldering heat Shock* IEC 60068 Part … 2-17 IEC 60679-1 Clause 5.6.2 MIL-STD202G Method 112E 2-20 2-58 5.6.3 208H 210F 2-27 5.6.8 213B Vibration, 2-6 5.6.7.1 201A sinusoidal* 204D Vibration, 2-64 5.6.7.3 214A random* Endurance tests 108A - ageing 5.7.1 - extended aging 5.7.2 Other environmental conditions on request MIL-STD810F Method MIL-PRF55310D Clause 3.6.1.2 3.6.52 3.6.48 516.4 3.6.40 516.4-4 3.6.38.1 3.6.38.2 3.6.38.3 3.6.38.4 514.5 4.8.35 Test conditions (IEC) Gross leak: Test Qc, Fine leak: Test Qk Test Ta Method 1 Test Td1 Method 2 Test Td2 Method 2 Test Ea, 3 x per axes 100g, 6 ms half-sine pulse Test Fc, 30 min per axes, 10 Hz - 55 Hz 0,75mm; 55 Hz - 2 kHz, 10g Test Fdb 30 days @ 85°C, OCXO @25°C 1000h, 2000h, 8000h @85°C Data sheet is for information purposes only and may be subject to modifications or may be discontinued without notice. Revision History Rev. Drawing Date [dd.mm.yyyy] 1 D0 20.06.2014 GmbH & Co. KG Roemerring 9 D-74821 Mosbach Germany Remarks First issue – Succeeds AXMW1030/1090GYT-01 AXGX90 Rev.1 Drawing D0 Page 3(3) Author Checked HH HH www.axtal.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]