SM4001 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS SM4007 TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SILICON RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATURES * Ideal for surface mounted applications * Low leakage current * Glass passivated junction SM-1(DO-213AB) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated solderable per MIL-STD-202E, Method 208 guaranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.12 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL SM4001 SM4002 SM4003 SM4004 SM4005 SM4006 SM4007 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current T A = 75oC Peak Forward Surge Current I FM(surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IO 1.0 Amps I FSM 30 Amps VF Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o IR @T A = 125 C 1.1 5.0 Maximum Thermal Resistance (Note 2) RθJL 50 20 Typical Junction Capacitance (Note 1) CJ 15 T J , T STG -65 to + 175 Operating and Storage Temperature Range Volts NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal resistance (Junction to Ambient),.24in2 (6.0mm2 ) coppeer pads to each terminal. Volts uAmps 0 C/ W pF 0 C RATING AND CHARACTERISTIC CURVES ( SM4001 THRU SM4007 ) DC COMPONENTS CO., LTD. R