MURS205-A THRU MURS260-A SURFACE MOUNT ULTRAFAST GLASS PASSIVATED RECTIFIER VOLTAGE：50 to 600V CURRENT： 2.0A FEATURE SMA／DO-214AC Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Ultrafast recovery time for high efficiency MECHANICAL DATA Terminal：Solder plated, solderable per MIL-STD-750, Method 2026 Case：Molded with UL-94 class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Marking：M205A M210A M220A M230A M240A M260A Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated, for capacitive load, derate current by 20％) SYMBOL MURS 205-A MURS 210-A MURS 220-A MURS 230-A MURS 240-A MURS 260-A units Maximum Recurrent Peak Reverse Voltage Vrrm 50 100 200 300 400 600 V Maximum RMS Voltage Vrms 35 70 140 210 280 420 V Maximum DC blocking Voltage Vdc 50 100 200 300 400 600 V Maximum Average Forward Rectified at Tl=125℃ If(av) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage atrated Forward current Maximum Reverse Recovery Time (Note 1) Ifsm 50 40 Vf 0.94 0.95 Trr 20 25 2.0 A 35.0 1.30 A 1.45 50 V nS Ta =25℃ Ta =150℃ Ir 5.0 150.0 μA Typical Junction Capacitance (Note 2) Cj 30.0 pF Typical Thermal Resistance (Note 3) Rth(jl) 13.0 ℃/W Tj, Tstg -55 to +150 ℃ Maximum DC Reverse Current at rated DC blocking voltage Storage and Operating Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHZ and applied voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A2 RATINGS AND CHARACTERISTIC CURVES MURS205-A THRU MURS260-A Rev.A2