KBU6005 THRU KBU610 6.0 AMPS. Single Phase Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes FEATURES KBU ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 ME CHANICAL ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20% KBU KBU KBU KBU KBU KBU KBU 6005 601 602 604 606 608 610 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A=65℃ VRRM VRMS VDC UNITS V V V I(AV) 6.0 A IFSM 175 A VF 1.0 V IR 5.0 500 μA Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 6.0A Maximum DC Reverse Current @ TA=25℃ Rated DC Blocking voltage per leg TA=125℃ Typical Thermal Resistance (Note1) (Note2) Operating Temperature Range Storage Temperature Range RθJA RθJC TJ TSTG 8.6 3.1 -55 to +150 ℃/W ℃ ℃ -55 to +150 Note: 1.Thermal Resistance from Junction to Ambient with units in Free Air, P.C.B. Mounted on 0.5×0.5”(12×12mm) Copper Pads,0.375” (9.5mm)Lead Length. 2. Thermal Resistance from Junction to Case with units Mounted on 2.6×1.4×0.06”Thick(6.5×3.5×0.15cm)L-Plate. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 KBU6005 THRU KBU610 RATING AND CHARACTERISTIC CURVES KBU6005 THRU KBU610 Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2