Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 GBJ6005 THRU GBJ610 Single Phase 6.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 6.0 Amperes KBJ6 FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% GBJ GBJ GBJ GBJ GBJ GBJ GBJ 6005 601 602 604 606 608 610 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current See Fig.2 I(AV) 6.0 A IFSM 150 A VF 1.0 V 5.0 μA Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 6.0A Maximum DC Reverse Current @ TA=25℃ IR rated DC blocking voltage per leg TA = 125℃ RθJA Typical Thermal Resistance (Note) RθJL 500 1.8 ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ NOTE： Thermal Resistance from Junction to Case with Device Mounted on 75×75×1.6mm Cu Plate Heatsink 1 Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 GBJ6005 THRU GBJ610 RATING AND CHARACTERISTIC CURVES KBP6005 THRU KBP610 Note: Specifications are subject to change without notice. 2