Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 KBL4005 THRU KBL410 Single Phase 4.0 AMPS. Silicon Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% KBL KBL KBL KBL KBL KBL KBL 4005 401 402 404 406 408 410 UNITS SYMBOLS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA=50℃ I(AV) 4.0 A IFSM 150 A VF 1.1 V Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 4.0A Maximum DC Reverse Current @ TA=25℃ rated DC blocking voltage per leg TA=125℃ Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range IR 10 500 μA RθJA 19 RθJL 2.4 TJ -55 to +150 ℃ TSTG -55 to +150 ℃ ℃/W Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.with 0.47×0.47”(12×12mm) Copper Pads. 1 Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 KBL4005 THRU KBL410 RATING AND CHARACTERISTIC CURVES KBL4005 THRU KBL410 Note: Specifications are subject to change without notice. 2