Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 KBPC35005 THRU KBPC3510 High Current 35 AMPS. Single Phase Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 35 Amperes FEATURES ◆Ideal for printed circuit board ◆Reliable low cost construction technique results in inexpensive product ◆High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension ◆UL Recognized File number: E347214 MECHANICAL DATA ◆Case: Molded plastic ◆Lead: solder plated ◆Polarity: As marked MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current by 20% Type Number KBPC KBPC KBPC KBPC KBPC KBPC KBPC 35005 3501 3502 3504 3506 3508 3510 UNITS SYMBOLS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC=55℃ I(AV) 35 A IFSM 400 A VF 1.1 V IR 10 μA RθJC 2.0 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage at 17.5A Maximum DC Reverse Current at Rated DC Blocking voltage per Element Typical Thermal Resistance (Note) Operating Temperature Range Storage Temperature Range Note: Thermal Resistance from Junction to Case. 1 Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 KBPC35005 THRU KBPC3510 RATING AND CHARACTERISTIC CURVES KBPC35005 THRU KBPC3510 Note: Specifications are subject to change without notice. 2