hitron-e.com

H HiTRON
UNIVERSAL INPUT AC-DC MEDICAL APPLICATION
OPEN FRAME INTERNAL SWITCHING POWER SUPPLIES
65WATTS GREEN POWER TRIPLE OUTPUT HICM65 SERIES
FEATURES:
 COMPACT 4”x 2” PACKAGE
 FREE AIR CONVECTION
 UP TO 83% HIGH EFFICIENCY
 -20°C TO +70°C WIDE OPERATING TEMP.
 MEET MEDICAL STANDARDS IEC60601-1
 PCB & ENCLOSURE FORMAT OPTIONAL
 CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Voltage: Typical 90-264Vac.
Input Connector: V-H connector.
Input Frequency: 47-63Hz.
Inrush Current: Typical 16A rms at 230Vac.
Input Current: Typ. 1.1A at 115Vac, 0.55A at 230Vac.
Dielectric Withstand: Meet IEC60601-1.
EMI: Meet CISPR EN55022 Class B.
Hold-up Time: Typ. 16mS at 115Vac,76mS at 230Vac.
Earth Leakage Current: Less than 0.24mA at 230Vac.
Enclosure Leakage Current: 0.01mA at 230Vac.
No Load Power: Less than 1.5W at 230Vac.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: V-H connector.
Output Wattage: Typical 65 watts.
Line Regulation: Typical 0.5-2%.
Load Regulation: VO1/2 typ. ±2.0%, VO3 typ. ±3.0%
Total Regulation: VO1 typ. ±4.0%, VO2/3 typ. ±8.0%.
Noise & Ripple: Typical 1.0% peak to peak.
OVP: Built-in VO1 (Auto-recovery).
Adjustability: Not available.
Overload Protection (OLP):
Fully protected against outputs overload and short circuit.
Typ. OLP set at 130-150% of rating output power.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 83% at 230Vac(various with the o/p volt.)
Switching Frequency: 65K Hz.
Circuit Topology: Fix-flyback Circuit.
Transient Response: Output voltage returns in less than
0.01mS following a 25% load change.
Safety Standard: IEC60601-1 Class I.
Operating Temperature: -20°C to +70 °C with derating.
(please refer to the derating chart).
Storage Temperature: -25 to +85°C.
Cooling: Free air convection.
Construction: PCB and Enclosure optional.
Power Density: 6.5Watts / Cubic Inch.
NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load varied from half load to full load (%).
(3) Due to requests in market and advances in technology, specifications subject to change without notice.
-1-
Edited on May 27, 2015 Version 0 OUTPUT VOLTAGE / CURRENT RATINGS CHART
SINGLE OUTPUT
MAIN VO1 ★
MODEL NO.
(note 1)
AUX. VO2
Min.
Typ.
AUX. VO3
Min.
Typ.
Volt.
Max.
Max.
Min.
Typ.
Volt.
Max.
HICM65-T050II
1.2A
6.0A
+5V
8.0A 0.50A 2.50A +12V 3.0A
0.1A
0.5A
-12V
0.5A
HICM65-T050KK
1.2A
6.0A
+5V
8.0A 0.40A 2.00A +15V 2.5A
0.1A
0.5A
-15V
0.5A
HICM65-T050MI
1.2A
6.0A
+5V
8.0A 0.25A 1.25A +24V 1.5A
0.1A
0.5A
-12V
0.5A
Volt.
Remark: “★” OVP built-in
Note: 1.Please add suffix to model number to define type: add “-C” for enclosure (metal box) version, otherwise will be PCB version.
For example: HICM65-T050II is for PCB version, HICM65-T050II-C is for enclosure (metal box) version.
2. Derate output power by 20% for enclosure version.
MECHANICAL DIMENSIONS: MM [INCHES]
PCB Version
DERATING CHART
Enclosure (Metal Box) Version
INPUT & OUTPUT
CONNECTORS
PIN ASSIGNMENT
-2-
ASSIGNMENT
CNTR/PIN#
AC-LINE
CNT1-L
AC-NEUTRAL
CNT1-N
AC-GROUND
GND
VO1
CNT2-5,6
VO2
CNT2-2
VO3
CNT2-1
DC COM
CNT2-3,4
Edited on May 27, 2015 Version 0