M62354P/FP/GP 8-bit 6ch D/A Converter with Buffer Amplifiers REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Description The M62354 is an integrated circuit semiconductor of CMOS structured with 6 channels of built-in D/A converters with output buffer operational amplifiers. The 3-wire serial interface method is used for the transfer format of digital data to allow connection with microcomputer with minimum wiring. It is able to cascading serial use with DO terminal. The output buffer operational amplifier operates in the whole voltage range from power supply to ground for both input/output. Features • 12-bit serial data input (3-wire serial data transfer method) • Highly stable output buffer operational amplifier allow operation in the all voltage range from power supply to ground. Application Adjustment/control of industrial or home-use electronic equipment, such as VTR camera, VTR set, TV, and CRT display. Block Diagram VCC VDD AO6 AO5 AO4 AO3 VSS 14 13 12 11 10 9 8 + − + − + − + − Buffer OP Amp D/A D/A D/A 8-bit R-2R segment D/A converter 5 Ch6 L 4 L 3 8-bit latch L (6) (6) ...... .... Address decoder 8-bit latch L 2 D/A + − D11 10 9 8 D7 6 5 4 3 2 1 0 12-bit shift register 8-bit R-2R segment D/A converter + − Ch1 Buffer OP Amp 1 2 3 4 5 6 7 DO LD CLK DI AO1 AO2 GND REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 1 of 9 M62354P/FP/GP Pin Arrangement M62354P/FP M62354GP VCC DO 1 16 VCC 13 VDD LD 2 15 VDD 12 AO6 CLK 3 14 AO6 DO 1 14 LD 2 CLK 3 DI 4 11 AO5 DI 4 13 AO5 AO1 5 10 AO4 AO1 5 12 AO4 AO2 6 9 AO3 AO2 6 11 AO3 VSS NC 7 10 NC GND 8 9 VSS GND 8 7 (Top view) Outline: 14P4 PRSP0014DD-A (14P2N-A) NC: No connection (Top view) Outline: PLSP0016JA-A (16P2E-A) Pin Description Pin No. 4 (4) 1 (1) 3 (3) 2 (2) 5 (5) 6 (6) 9 (11) 10 (12) 11 (13) 12 (14) 14 (16) 7 (8) 13 (15) 8 (9) Note: Pin Name DI DO CLK LD AO1 AO2 AO3 AO4 AO5 AO6 VCC GND VDD VSS Function Serial data input terminal Serial data output terminal Serial clock input terminal LD terminal input high level then latch circuit data load 8-bit D/A converter output terminal Power supply terminal Digital and analog common GND D/A converter upper reference voltage input terminal D/A converter lower reference voltage input terminal ( ) : M62354GP REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 2 of 9 M62354P/FP/GP Block Diagram for Explanation of Terminals VCC GND 14 7 DI 4 CLK 3 12-bit shift register D0 D1 D2 D3 D4 D5 D6 D7 (6) D0 ..... 8-bit latch D7 D10 D11 ............................... 5 ..... 8-bit latch 2 LD D7 8-bit R-2R segment D/A converter 12 AO6 AO1 VDD (VrefU) DO + − + − ......................................... 1 1 2 3 4 5 6 D0 ............................... 6 8-bit R-2R segment D/A converter 13 D9 Address decoder (8) 1 D8 8 VSS (VrefL) Absolute Maximum Ratings Item Supply voltage D/A converter upper reference voltage Input voltage Output voltage Power dissipation Operating temperature Storage temperature REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 3 of 9 Symbol VCC VDD VIN VO Pd Topr Tstg Ratings –0.3 to +7.0 –0.3 to +7.0 –0.3 to VCC + 0.3 –0.3 to VCC + 0.3 440 (P) / 250 (FP) / 150 (GP) –20 to +85 –40 to +125 Unit V V V V mW °C °C M62354P/FP/GP Electrical Characteristics <Digital Part> (VCC, VrefU = 5 V ± 10%, VCC ≥ VrefU, GND, VrefL = 0 V, Ta = –20 to +85°C, unless otherwise noted.) Min Limits Typ Max Unit Supply voltage Circuit current VCC ICC 4.5 — 5.0 0.7 5.5 2.5 V mA Input leak current Input low voltage Input high voltage Output low voltage Output high voltage IILK VIL VIH VOL VOH –10 — 0.8 VCC — VCC – 0.4 — — — — — 10 0.2 VCC — 0.4 — µA V V V V Item Symbol Conditions CLK = 1 MHz operation VCC = 5 V, IAO = 0 µA VIN = 0 to VCC IOL = 2.5 mA IOH = –400 µA <Analog Part> (VCC, VrefU = 5 V ± 10%, VCC ≥ VrefU, Ta = –20 to +85°C, unless otherwise noted.) Min Limits Typ Max Unit Current dissipation IDD — 0.7 1.3 mA D/A converter upper reference voltage range VDD 3.5 — VCC V D/A converter lower reference voltage range VSS GND — VCC – 3.5 V Buffer amplifier output voltage range VAO IAO — — — VCC – 0.1 VCC – 0.2 1 V Buffer amplifier output drive range 0.1 0.2 –1 mA Differential nonlinearity error Nonlinearity error Zero code error Full scale error Output capacitive load SDL –1.0 — 1.0 LSB SL SZERO SFULL CO –1.5 –2 –2 — — — — — — 5 1.5 2 2 0.1 — LSB LSB LSB µF Ω Item Buffer amplifier output impedance Symbol RO REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 4 of 9 Conditions VrefU = 5 V, VrefL = 0 V Data condition: at maximum current The output does not necessarily be the value within the reference voltage setting range. The output value is determined by the buffer amplifier output voltage range (VAO). IAO = ± 100 µA IAO = ± 500 µA Upper side saturation voltage = 0.3 V Lower side saturation voltage = 0.2 V VrefU = 4.79 V VrefL = 0.95 V VCC = 5.5 V (15 mV/LSB) Without load (IAO = ±0 µA) M62354P/FP/GP AC Characteristics (VCC, VrefU = 5 V ± 10%, VCC ≥ VrefU, GND, VrefL = 0 V, Ta = –20 to +85°C, unless otherwise noted.) Item Clock "L" pulse width Clock "H" pulse width Clock rise time Clock fall time Data setup time Data hold time LD setup time LD hold time LD "H" pulse width Data output delay time D/A output setting time Symbol tCKL tCKH tCR tCF tDCH tCHD tCHL tLDC tLDH tDO tLDD Min Limits Typ Max Unit 200 200 — — 30 60 200 100 100 70 — — — — — — — — — — — — — — 200 200 — — — — — 350 300 ns ns ns ns ns ns ns ns ns ns µs Conditions CL ≤ 100 pF CL ≤ 100 pF, VAO: 0.5 ↔ 4.5 V The time until the output becomes the final value of 1/2 LSB Timing Chart tCR tCKH tCF CLK tCKL tLDC DI tLDH tDCH tCHD tCHL LD tLDD D/A output tDO DO output REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 5 of 9 M62354P/FP/GP Digital Data Format First MSB Last LSB D0 D1 D2 D3 D4 D5 D6 D7 DAC data D8 D9 D10 D11 DAC select data DAC Data D0 0 1 0 1 : 0 1 D1 0 0 1 1 : 1 1 Note: D2 0 0 0 0 : 1 1 D3 0 0 0 0 : 1 1 D4 0 0 0 0 : 1 1 D5 0 0 0 0 : 1 1 D6 0 0 0 0 : 1 1 D7 0 0 0 0 : 1 1 D/A Output (VrefU – VrefL) / 256 × 1 + VrefL (VrefU – VrefL) / 256 × 2 + VrefL (VrefU – VrefL) / 256 × 3 + VrefL (VrefU – VrefL) / 256 × 4 + VrefL : (VrefU – VrefL) / 256 × 255 + VrefL VrefU VrefU = VDD, VrefL = VSS DAC Select Data D8 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D9 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D10 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D11 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 DAC Selection Don't care AO1 selection AO2 selection AO3 selection AO4 selection AO5 selection AO6 selection Don't care Don't care Don't care Don't care Don't care Don't care Don't care Don't care Don't care Timing Chart (Model) MSB DI D11 LSB D10 CLK LD D/A output REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 6 of 9 D9 D8 ............. .................. D2 D1 D0 M62354P/FP/GP Typical Characteristics Lower Side Saturation Voltage vs. Output Sink Current Upper Side Saturation Voltage vs. Output Source Current 150 Lower Side Saturation Voltage VAOSATL (mV) Upper Side Saturation Voltage VCC-VAOSATU (mV) 150 100 50 100 50 0 0 0 200 400 600 800 1000 Output Source Current IAOD (µA) REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 7 of 9 0 200 400 600 800 1000 Output Sink Current IAOS (µA) M62354P/FP/GP Package Dimensions 14P4 Plastic 14pin 300mil DIP Weight(g) 1.0 Lead Material Alloy 42/Cu Alloy 8 1 7 E 14 c JEDEC Code — e1 EIAJ Package Code DIP14-P-300-2.54 D A2 Symbol e JEITA Package Code P-SOP14-5.3x10.1-1.27 RENESAS Code PRSP0014DD-A b1 Previous Code 14P2N-A b MASS[Typ.] 0.2g 8 *1 E 14 HE A A1 A2 b b1 c D E e e1 L A1 LA SEATING PLANE Dimension in Millimeters Min Nom Max 4.5 — — 0.51 — — 3.3 — — 0.4 0.5 0.6 1.4 1.5 1.8 0.22 0.27 0.34 19.0 19.2 18.8 6.15 6.3 6.45 2.54 — — 7.62 — — 3.0 — 15° 0° — F NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 1 7 Index mark c *2 D A1 e y *3 L A A2 bp Detail F REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 8 of 9 Reference Symbol D E A2 A1 A bp c HE e y L Dimension in Millimeters Min Nom Max 10.0 10.1 10.2 5.2 5.3 5.4 1.8 0.1 0.2 0 2.1 0.35 0.4 0.5 0.18 0.2 0.25 0° 8° 7.5 7.8 8.1 1.12 1.27 1.42 0.1 0.4 0.6 0.8 M62354P/FP/GP JEITA Package Code P-LSSOP16-4.4x5-0.65 RENESAS Code PLSP0016JA-A MASS[Typ.] 0.06g 9 E 16 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. *1 HE Previous Code 16P2E-A F 1 8 Index mark c A2 A1 Reference Dimension in Millimeters Symbol *2 A L D *3 e bp y Detail F D E A2 A A1 bp c HE e y L REJ03D0872-0300 Rev.3.00 Mar 25, 2008 Page 9 of 9 Min 4.9 4.3 Nom Max 5.0 5.1 4.4 4.5 1.15 1.45 0 0.1 0.2 0.17 0.22 0.32 0.13 0.15 0.2 0° 10° 6.2 6.4 6.6 0.53 0.65 0.77 0.10 0.3 0.5 0.7 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2