ISSI pFlash® Over 4 Billion Units Shipped! Here a pFlash®, there a pFlash®, Everywhere a pFlash®! • Key features of ISSI 25-Series LD/WD family ► Addressing a Serial Flash SAM of 400M$ for ≤4Mb (TAM: 1.6B$) ► pFlash® Cell •256Kb, 512Kb, 1Mb, 2Mb, and 4Mb parts in production •Industry-standard 8-pin SOIC (208/150 mil), USON, WSON, and thin VVSOP packages available •Low pin count simplifies board layout, reduces footprint and overall system cost in embedded designs •Uniform 4 KB sectors for parameter storage •Software and hardware write protection for enhanced security and IP protection (OTP) •Fast read performance for quick boot •Built upon proprietary pFlash® technology • pFlash® technology offers: •Lower power consumption •High-speed programming •High-speed erase capabilities •Industry’s best solid data retention (Min 20 years and 200K cycles of endurance) ► pFlash® High Endurance Metrics • pFlash® Advantage: ► •The low programming/erase current enables Testby-Performance. This comprises of extracting the statistical behavior of all critical parameters and by setting the test specification to remove extrinsic distributions •pFlash® technology adopts built-in-tests to remove infant mortality by facilitating cell characterization and implementing comprehensive stress modes to provide the lowest DPPM on the market (<0.013 DPPM 2012) • Applications: ► •pFlash®’s High-Quality and Reliability parts are used in code storage applications in consumer electronics such as: graphics cards, notebook cameras, PC bios, LCD monitors, HDD, ODD, Bluetooth, cordless phones, NFC, fingerprint, DSC, Zigbee, and various other industrial and medical applications. •This family of low-density parts are offered in voltages ranging from 1.8V to 3.6V. With read performances of up to 100Mhz for fast application boot, coupled with industrial temp ranges, high quality, and reliability, it’s no wonder ISSI’s pFlash® technology is the leading technology of choice for code storage in HDD markets. June 2013 w 1940 Zanker Rd., San Jose, CA. 95112 w Tel: 408.969.6600 w Support: [email protected] w www.issi.com pFlash® Advantage: pFlash® High Endurance Metrics ► pFlash® DPPM (Lowest in the industry) NOR Serial Flash: Den Part No. Dual SPI Voltage(V) Frequency (MHz) 256K Package Type* Temperature** Status IS25CD025 ● 2.7-3.6 33/100 JN, JD E, A1, A2 Production 512K IS25CD512 ● 2.7-3.6 33/100 JN, JD, JK, JU E, A1, A2 Production 1M IS25CD010 ● 2.7-3.6 33/100 JN, JD E, A1, A2 Production 2M IS25LD020 2M IS25WD020 ● 2.3-3.6 33/100 JN, JD, JK JV E, A1, A2 Production 1.65-1.95 30/80 JN, JB, JK, JV E, A1, A2 ● Production 4M IS25LD040 ● 2.3-3.6 33/100 JN, JB, JK, JV E, A1, A2 Production 4M IS25WD040 ● 1.65-1.95 33/80 JN, JB, JK, JV E, A1, A2 Production For KGD or WLCSP contact factory Other Flash Products Available from ISSI NOR ISA Flash: Den Part No. Type Voltage(V) Speed (ns) Package Type* Temperature** Status 512K IS39LV512 x8 2.7-3.6 70 70JCE, 70VCE I, A1 Production 1M IS39LV010 x8 2.7-3.6 70 70JCE, 70VCE I, A1 Production 4M IS39LV040 x8 2.7-3.6 70 70JCE, 70VCE 0°C to 85°C Production Type Voltage(V) Speed (ns) Package Type* Temperature** Status x8 3.0-3.6 33 33VCE, 33JCE 0°C to 85°C Production NOR FWH Flash Den Part No. 4M IS49FL004T * Pacakge Types JN = 8 pin SOIC 150mil JB = 8 pin SOIC 208mil JD = 8 pin TSSOP JK = 8 pin WSON (5x6 mm) JU = 8 pin USON (2x3mm) JV = 8 pin VVSOP 150mil 33JCE = 32 pin PLCC 33VCE = 32 pin VSOP(8x14mm) 70JCE = 32 pin PLCC 70VCE = 32 pin VSOP(8x14mm) ** Temperature • • • • I = Industrial grade (-40C to +85C) E= Extended grade (-40C to +105C) A1 = Automotive grade (-40C to +85C) (Call Factory) A2 = Automotive grade (-40C to +105C) (Call Factory) June 2013 w 1940 Zanker Rd., San Jose, CA. 95112 w Tel: 408.969.6600 w Support: [email protected] w www.issi.com