30478_LTSR_2014_Final.qxp_LTSR_2014.QXD 2014-06-10 5:49 PM Page 17 Material: • Body: Polyamide 6 • Seal: Neoprene Temperature Range -35 to 95°C (-31 to 203°F) NPT Thread NPT 3/8" NPT 1/2" NPT 3/4" NPT 1" Clamping range mm 5-8 7-12 12-18 16-25 Cat. No. Blue 5507760 5507761 5507762 5507763 M M M M M M M M M M M 12 16 16 20 20 25 25 32 40 50 63 x x x x x x x x x x x 1.5 1.5/9 1.5/11 1.5/13 1.5/16 1.5/16 1.5/21 1.5 1.5 1.5 1.5 Clamping range mm 4-6.5 5-8 5-10 7-12 10-14 10-14 12-18 16-25 22-32 28-38.5 40-48 Cat. No. Blue 5507560 5507561 5507562 5507563 5507564 5507565 5507566 5507567 5507568 5507569 5507570 50 50 20 20 Std. Pk. 50 50 50 50 50 20 20 20 20 10 5 Thread Size NPT 3/8 NPT 1/2 NPT 3/4 NPT 1 M12x1.5 M16x1.5/9 M16x1.5/11 M20x1.5/13 M20x1.5/16 M25x1.5/16 M25x1.5/21 M32x1.5 M40x1.5 M50x1.5 M63x1.5 H mm E mm 15 19 22 24 27 27 33 42 53 60 70 8 10 10 10 10 10 10 10 10 12 12 19 24 33 42 11 14 15 18 Dimensions L ØC mm mm 38 44 54 60 8.5 12.5 18.5 25.5 32 37 39 40 43 45 49 52 62 67 68 6.7 8.5 10.5 12.5 14.5 14.5 18.5 25.5 32.5 39.0 48.5 Insert Neoprene ØP mm ØThread mm 6.8 8.5 10.5 12.5 14.5 14.5 18.5 25.5 32.5 39.0 48.5 12.0 16.0 16.0 20.0 20.0 25.0 25.0 32.0 40.0 50.0 63.0 8.7 12.5 18.5 25.5 17.1 21.2 26.7 33.3 Dome Nut PA 6 Body PA 6 H * Extended thread available consult Altech Device Group: II Category: 2 and 3 Atmosphere: G/D Zone: 1, 2, 21 and 22 Std. Pk. Metric Thread* Outer thread ATEX Characteristics: Certificate: LCIE 07 ATEX 6082X Type of protection: Ex e Test Standards: EN60079-0 EN60079-7 EN61241-0 EN61241-1 ATEX C Technical Properties: • Maximum strain relief through clamping range • Trapezoidal thread with high torque guarantees tight and permanent fit of the dome nut • Gas tight and watertight Thread P • Flat Seal: Neoprene • Color: Blue Outer thread L.C.I.E. Applications: • Explosion endangered areas • Machines and devices • Measuring and control engineering • Plant installations E L Locknuts sold separately, see page 24. Altech Corp.® l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com 17 30478_LTSR_2014_Final.qxp_LTSR_2014.QXD 2014-06-17 4:37 PM Page 18 Material: • Body: Polyamide PA 6 25 % Glass fiber Reinforced • Seal: Neoprene • ECA clamping ring: Polycarbonate Characteristics: • PG/Metric thread • Extended thread available • Strain relief through clamping ring ATEX (Punch-out Seal) Cat. No. Black Std. Pk. PG PG 9 PG 11 PG 13.5 PG 16 PG 21 PG 29 3.5 - 8.5 4.0 - 10.5 5.0 - 12.5 6.5 - 14.0 8.0 - 18.5 10.0 - 25.0 5507050 5507051 5507052 5507053 5507054 5507055 50 50 50 50 20 20 Metric M 16 x 1.5 M 20 x 1.5/13 M 20 x 1.5/16 M 25 x 1.5 M 32 x 1.5 3.5 - 8.5 5.0 - 12.5 6.5 - 14.0 8.0 - 18.5 10.0 - 25.0 5507250 5507251 5507252 5507253 5507254 50 50 50 20 20 Dimensions E L ØC mm mm mm 8 32 8.5 8 35 11.5 9 36 12.5 10 40 14.5 11 44 18.5 12 55 25.0 8 32 8.5 9 36 12.5 9 39 14.5 11 44 18.5 12 55 25.0 ØP mm 9.0 11.0 13.5 15.0 19.0 25.0 9.0 13.5 15.0 19.0 25.0 ØPG/M mm 15.2 18.6 20.4 22.5 28.3 37.0 16.0 20.0 20.0 25.0 32.0 ATEX Characteristics: Certificate: LCIE 99 ATEX 6030X Type of protection: Ex e Test Standards: EN60079-0 EN60079-7 EN61241-0 EN61241-1 Seal Neoprene Dome Nut Polyamide Device Group: II Category: 2 and 3 Atmosphere: G/D Zone: 1 and 2 (21 and 22 with seal ring) Clamping Polycarbonate Body Polyamide PG/M Clamping range mm Thread H Size mm PG9 19 PG11 22 PG13.5 24 PG16 27 PG21 33 PG29 42 M 16x1.5 19 M 20x1.5/13 24 M 20x1.5/16 27 M 25x1.5 33 M 32x1.5 42 L.C.I.E. ØP Outer thread Gland must be mounted with flat seal and locknut. Temperature Range -20 to 55°C (-4 to 131°F) ØC ECA Clamping Ring Applications: • For explosion endangered areas according to EN 50014 and EN 50019 • Machines and devices • Measuring and control engineering • Plant installations L E H Locknuts and seal rings sold separately, see page 24 and 35. 18 Altech Corp.® l 35 Royal Road l Flemington, NJ 08822-6000 l Phone (908)806-9400 l FAX (908)806-9490 l www.altechcorp.com