1.6x0.8mm SMD CHIP LED LAMP Part Number: APHK1608SYCK Super Bright Yellow Features Description z1.6mmx0.8mm SMT LED, 0.7mm thickness. The Super Bright Yellow device is made with AlGaInP (on zLow power consumption. GaAs substrate) light emitting diode chip. zWide viewing angle. zIdeal for backlight and indicator. zVarious colors and lens types available. zPackage : 2000pcs / reel. zMoisture sensitivity level : level 4. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAC0591 REV NO: V.6 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 1 OF 5 ERP: 1204000052 Selection Guide Part No. Dice APHK1608SYCK Lens Type Super Bright Yellow (AlGaInP) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 50 180 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAC0591 REV NO: V.6 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 2 OF 5 ERP: 1204000052 Super Bright Yellow APHK1608SYCK SPEC NO: DSAC0591 REV NO: V.6 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 3 OF 5 ERP: 1204000052 APHK1608SYCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAC0591 REV NO: V.6 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 4 OF 5 ERP: 1204000052 PACKING & LABEL SPECIFICATIONS APHK1608SYCK SPEC NO: DSAC0591 REV NO: V.6 DATE: MAR/26/2009 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: X.J.Guo PAGE: 5 OF 5 ERP: 1204000052