www.hammondmfg.com General Accessories Hardware Junction Box Padlock Kit Heavy Duty Door Clamping Hardware General Accessories • Replacement hardware for use on all 1418 and 1447 Series enclosures. • Formed heavy gauge stainless steel clamp with stainless steel hardware. • Sold in sets of two. Part No. 1481HC18 Door Clamping Hardware Quick Release Clamp • Field installed kit requires drilling of only 4 holes • Compatible with 1414 Series junction boxes. • Only available in 316 Stainless Steel. • Sold Individually. • Installation Instructions provided Part No. 14PLKS16 • Provides fast access to conventional screw clamp type enclosures. • Installs on clamp bracket in place of screw on 1418, 1418N4, 1447N4, and 1422N4 Series enclosures. • Entire assembly is stainless steel. • Set of two. 1418QR Part No. Lifting or Pull Handles Quick Release Junction Box Clamp Hardware • Replacement hardware for use on 1414, 1485, 1486, and 1487 Hammond enclosures. • Formed heavy gauge stainless steel. • Set of two Part No. 1481C14 • Installs easily on standard clamp bracket allowing for quick access. • Compatible with 1414 Series junction boxes. Also 1485 Series wireway and 1486 trough. • Available in plated or stainless steel. • Sold Individually. Part No. 14QR 14QRSS 14QRS16 Material Plated Steel 304 SS 316 SS Technical references and CAD downloads available at www.hammondmfg.com 429 • Chrome plated steel accessory handles. • Two 10-32 screws on 1427L, M, and N; 6-32 screws on 1427P and Q. • Additional sizes available. Consult factory. Part No. 1427L 1427M 1427N 1427P 1427Q Mtg. Centers 7.00 5.25 3.50 2.81 2.25 Handle Diameter 0.375 0.375 0.375 0.250 0.250 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com General Accessories Hardware Handle Kits for Type 4 and 4X Enclosures • • • • • • • Durable zinc die cast or stainless steel Removable handle stop for clockwise / counter-clockwise operation Textured powder coat Black finish on zinc cast handle Maintains NEMA rating of enclosure Padlock “trigger” design for security requirements Optional key lock or defeater available Handle can be used on other Hammond enclosures as field installation or installed at factory … contact Hammond Technical references and CAD downloads available at www.hammondmfg.com Material Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc Zinc 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS 316 SS NEMA Rating 4 4 4 4 4 4 4 4 4 4X 4X 4X 4X 4X 4X 4X 4X 4X All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Hardware Description 6” PADLOCKING 1PT. LATCH 6” PADLOCKING 3PT < 60” 6” PADLOCKING 3PT > 60” 6” PADLOCKING DEFEATER 1PT LATCH 6” PADLOCKING DEFEATER 3PT < 60” 6” PADLOCKING DEFEATER 3PT > 60” 6” KEYED PADLOCKING 1PT LATCH 6” KEYED PADLOCKING 3PT < 60” 6” KEYED PADLOCKING 3PT > 60” 6” SS PADLOCKING 1PT LATCH 6” SS PADLOCKING 3PT LATCH < 60” 6” SS PADLOCKING 3PT LATCH > 60” 6” SS PADLOCKING DEFEATER 1PT LATCH 6” SS PADLOCKING DEFEATER 3PT < 60” 6” SS PADLOCKING DEFEATER 3PT > 60” 6" SS KEYED PADLOCKING 1PT LATCH 6" SS KEYED PADLOCKING 3PT < 60” 6" SS KEYED PADLOCKING 3PT > 60” General Accessories Part No. MHK1 MHK2 MHK3 MHKD1 MHKD2 MHKD3 MHKL1 MHKL2 MHKL3 MHK1SS MHK2SS MHK3SS MHKD1SS MHKD2SS MHKD3SS MHKL1SS MHKL2SS MHKL3SS USA: 716.630.7030 Data Subject to change without notice 430 www.hammondmfg.com General Accessories Hardware Latch Kits for Single Door Type 12 Enclosures • Designed for field installation on most 1418 Series single door enclosures (does not fit 1418 J Series). • Available with key locking, padlocking, and non-locking handles. • Single point kits include a handle and latch cam. • Three point kits include a handle, latch cam, latch rods and adjustable rod guides. • Latch rod ends have rollers for easier door closing. • All parts are plated or painted for corrosion resistance. General Accessories Non-Locking Handle AHK1 AHK2 AHK3 AHK1 Handle Rotation Locking Handle Handle Rotation clockwise clockwise clockwise AHKL1 AHKL2 AHKL3 counter clockwise counter clockwise counter clockwise Padlocking Handle PHK1 PHK2 PHK3 PHK1 Locking & Padlocking Handle PHKL1 PHKL2 PHKL3 AHKL1 "Tee" Locking Handle THK1 THK2 THK3 Description 1 point latch 3 point latch 48" and under 3 point latch 60" and over Description 1 point latch 3 point latch 48" and under 3 point latch 60" and over PHKL1 Hardware Lock Kit for NEMA 1 Enclosures • Installs in place of the existing slotted latch, or in cutout hole provided. • Reversible cam position for other applications. • Maintains NEMA1 rating. Part No. 1427LKN1 N1JLK 1427LKN1 N1JLK Fits Enclosure Series 1420, N1A N1J, CHKO, N1WS, N1WF Lock Kit for 1418 Type 4 and 12 Enclosures • Designed for installation on most 1418 Series single door enclosures (does not fit 1418 J Series). • Requires a drilled or punched hole to receive cylinder lock. • Internal "0" ring provides dust and water tight construction. • Maintains NEMA rating. Technical references and CAD downloads available at www.hammondmfg.com 431 Part No. 1427LKN4 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com General Accessories Hardware Part No. Description 1421 pkg. of 4 screws & 4 washers 142110 pkg. of 10 screws & 10 cup washers 142125 pkg. of 25 screws & 25 cup washers Part No. Description 1421B pkg. of 4 screws & 4 washers Nickel plated 10-32 x 0.5" thumb screws with nylon washers for captivating panels up to 0.09" thick. Head is 0.62" diameter x 0.37" high. Part No. 1421A Description pkg. of 4 screws & 4 washers 1421A10 pkg. of 10 screws & 10 cup washers 1421A25 pkg. of 25 screws & 25 cup washers Part No. Description 1421B2 pkg. of 2 screws, nuts & washers Polished stainless steel 1/4-20 x 0.87" thumb screws with nylon washers and steel nuts for captivating panels up to 0.4" thick. Head is 0.68" diameter x 0.25" high. Nickel plated 10-32 x 0.63" combo slot, Phillips oval countersunk head screws with plastic cup washers. Description pkg. of 10 screws pkg. of 25 screws pkg. of 100 screws pkg. of 500 screws Part No. 1421D 1421D100 1421D500 Nickel plated 10-32 x 0.63" combo slot, Phillips oval countersunk head screws. Part No. 1421A25W 1421A100W 1421A500W Zinc plated 10-32 x 0.5” slotted pan head screws. Description pkg. of 25 cup washers pkg. of 100 cup washers pkg. of 500 cup washers Part No. 1421E25W 1421E100W 1421E500W 1421E1000W Black plastic cup washers for countersunk 10-32 screws. Technical references and CAD downloads available at www.hammondmfg.com Description pkg. of 25 screws pkg. of 100 screws pkg. of 500 screws Description pkg. of 25 washers pkg. of 100 washers pkg. of 500 washers pkg. of 1000 washers Nickel plated metal cup washers for countersunk 10-32 screws. All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Hardware Part No. 1421A10B 1421A25B 1421A100B 1421A500B General Accessories Nickel plated 10-32 x 0.63" combo slot, Phillips oval countersunk head screws with steel cup washers. USA: 716.630.7030 Data Subject to change without notice 432 www.hammondmfg.com General Accessories Hardware Part No. 1421N25 1421N100 1421N250 1421N1000 Description pkg. of 25 clip nuts pkg. of 100 clip nuts pkg. of 500 clip nuts pkg. of 1000 clip nuts Part No. 1421NP25 1421NP100 1421NP250 1421NP1000 10-32 clip nuts for all panel rails and most other mounting positions. Has the holding strength of a standard 10-32 nut. General Accessories Part No. 1421F25 Zinc plated 10-32 clip nuts. 1032 clip nuts for all panel rails and most other mounting positions. Has the holding strength of a standard 10-32 nut. Description pkg. of 25 Part No. 1421K25 1421K100 Hardware 3/ Description pkg. of 3 Part No. 1421S -16 spring loaded nuts and 3/816 x 0.75" bolts for "C" channels. 1/ UL/CSA Hardware Kits • When used as instructed, kits maintain the UL/CSA Type rating of Hammond enclosures which unapproved hardware will not. • Screws require hex driver making them virtually tamper proof. • Kit includes 50 stainless steel screws, sealing washers and nuts with one hex driver per kit. • Offered in 8-32, 10-32 and ¼-20 at various lengths. 433 Description pkg. of 4 -20 spring loaded nuts and 1/420 x 0.62" round head bolts for "C" channels. 8 Technical references and CAD downloads available at www.hammondmfg.com Description pkg. of 25 screws & nuts pkg. of 100 screws & nuts Zinc plated 1/4-20 x 0.5" slotted round head screws with captive star washer nuts. Supplied with all panel rails and racks. Stainless steel 10-32 x 1.25" Phillips oval countersunk head (the extra length is necessary for raised panels). Part No. 1463S Description pkg. of 25 clip nuts pkg. of 100 clip nuts pkg. of 500 clip nuts pkg. of 1000 clip nuts 4 Part No. 1421N4AA50 1421N4AB50 1421N4BA50 1421N4BB50 1421N4CA50 1421N4CB50 Description 8-32 x ½" Kit 8-32 x 1" Kit 10-32 x ½" Kit 10-32 x 1" Kit ¼-20 x 5/8" Kit ¼-20 x 1" Kit All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com General Accessories Hardware Ground Lugs • • • • • • • Dual L16 type aluminum lug 1 1/8” wide x 1 3/16” long Provides excellent grounding Accepts wire sizes from 1/0 to 14 Usually used in conjunction with bus bar Packaged individually Mounting hardware not included (requires drilling of bus bar) DNGL Part No. • • • • For Eclipse Enclosures Field installable inserts replace standard quarter turn slot. Available in 7mm square and triangle formats, as well as slotted. Maintains NEMA, UL and CSA 12, Part No. Description 4 and 4X ratings. 2SQI7 7mm square insert, black • Square and triangle inserts provide 2SQK7 7mm square key, fits 2SQI7 extra security since standard screw 2TRI7 7mm triangle insert, black drivers cannot open. 2TRK7 7mm triangle key, fits 2TRI7 • Keys sold separately from inserts. 2SLI Slotted insert, black Replacement Quarter Turn Assemblies 2QPL Part No. EQTRL1 2WKL 2SSQTR Series used with Material NEMA Rating Swing Panel/ Zinc Die/ n/a Frame Chrome (internal use only) 2QTR Slotted Qtr Turn Eclipse Zinc Die/Black 12, 4, 2SSQTR Slotted Qtr Turn Eclipse Stainless steel 12, 4, 4X 2WKL Wing knob lock Eclipse Zinc Die/Black 12, 4, 2QPL Padlockable Qtr Turn Eclipse Zinc Die/Black 12, 4, EJQTR Slotted Qtr Turn Eclipse Junior Zinc Die/Black 12, 4 EJSSQTR Slotted Qtr Turn Eclipse Junior Stainless Steel 12, 4, 4X 1 Description Locking Qtr Turn Hardware EQTRL • Field installable. • Interchangeable with standard quarter turn latches on Eclipse or Eclipse Junior series. • Maintains NEMA, UL and CSA ratings as noted. General Accessories Quarter Turn Inserts and Keys For use with Swing Frame/Panel. Eclipse Padlock Adaptor • • • • • • • • For use with EN4SD Series Enclosures. Padlock adaptor fits directly over the slotted quarter turn preventing access. 14 gauge 304 stainless steel. Stainless steel mounting hardware provided Once installed, the bolts cannot be removed without the door open. Easy installed in the field. Padlock not included. Maintains UL/CSA Type 4, 4X rating. Part No. Technical references and CAD downloads available at www.hammondmfg.com EPA All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 434 www.hammondmfg.com General Accessories Hardware Eclipse Junior Padlock Adaptor • • • • • • • Padlock adapter fits directly over the slotted quarter turn preventing access. 2mm thick 14 gauge stainless steel. Stainless steel mounting hardware provided. Once installed, the bolts cannot be removed without the door open. Easy installed in the field. Padlock not included. Maintains UL/CSA Type 4, 4X rating. EJPA General Accessories Part No. Eclipse Junior Wing Knob • • • • • For use with EJ Series only. Installs in place of the standard quarter turn lock. Internal "O" ring provides dust and water tight construction. Zinc Diecast/Black. Maintains UL/CSA Type 12 rating. Part No. EJWKL Hardware Oil Tight Hole Plugs Hole Plugs - Steel • Designed to seal unused pushbutton holes, conduit openings and knockout holes against dust, oil and water. • Standard Pushbutton size is 30.5mm Part No. HP22 HP50 HP75 HPB HP100 HP125 HP150 HP200 HP250 HP300 HP350 HP400 Steel Hole Plugs • • • • Available in 12 sizes. Finished in gray. Oil resistant gasket. Secured with an 8-32 x .55" threaded stud and plated wing nut. Stainless Steel Hole Plugs • Available in 8 sizes. • Finished in brushed natural stainless finish. • Oil resistant gasket. • Secured with an 8-32 x .55" threaded stud and plated wing nut. Technical references and CAD downloads available at www.hammondmfg.com 435 Description 22mm Pushbutton .5" Conduit .75" Conduit Std. Pushbutton 1" Conduit 1.25" Conduit 1.5" Conduit 2" Conduit 2.5" Conduit 3" Conduit 3.5" Conduit 4" Conduit Diameter 1.22 1.38 1.63 1.75 1.88 2.25 2.50 3.00 3.50 4.14 4.66 5.19 Hole Plugs - Stainless Steel Part No. HP22SS HP50SS HP75SS HPBSS HP100SS HP125SS HP150SS HP200SS Description 22mm Pushbutton .5" Conduit .75" Conduit Std. Pushbutton 1" Conduit 1.25" Conduit 1.5" Conduit 2" Conduit Diameter 1.22 1.38 1.63 1.75 1.88 2.25 2.50 3.00 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice