www.hammondmfg.com Series 2000 Modular Console System - NEMA 12, 4, 4X Operator Interface Enclosure Rack Mount Accessories Flat Steel or Aluminum Panels • • • • Economical panels are made from high quality steel or aluminum. Mounting hardware not included, please order separately. Available in light gray (LG2), black (BK2) or gray (GY2). Aluminum panels are also available unfinished (UNF). Formed Steel Panel • A 0.50” fold top and bottom adds strength without increasing the panel thickness. • Mounting hardware not included, please order separately. • Available in light gray (LG2), black (BK2) or gray (GY2). No. of Slots 4 Modular Console System 8 10 12 Panel Height Inches 1.75 3.50 5.25 7.00 8.75 10.50 12.25 14.00 15.75 17.50 19.25 21.00 22.75 24.50 26.25 28.00 29.75 31.50 Units Flat 14 Gauge Steel (0.075") 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PBPS19001...1 PBPS19003... PBPS19005... PBPS19007... PBPS19008... PBPS19010... PBPS19012... PBPS19014... PBPS19015... PBPS19017... PBPS19019... PBPS19021... PBPS19022... PBPS19024... PBPS19026... PBPS19028... PBPS19029... PBPS19031... Flat 0 .125" Aluminum PBPA19001...2 PBPA19003... PBPA19005... PBPA19007... PBPA19008... PBPA19010... PBPA19012... PBPA19014... PBPA19015... PBPA19017... PBPA19019... PBPA19021... PBPA19022... PBPA19024... PBPA19026... PBPA19028... PBPA19029... PBPA19031... 1 Specify color code. Light Gray (LG2), Black (BK2) or Gray (GY2). 2 Specify color code. Light Gray (LG2), Black (BK2) Gray (GY2) or Unfinished (UNF). When unfinished, panels are paper covered on one side. 1 unit = 1.75” Technical references and CAD downloads available at www.hammondmfg.com 229 Formed 16 Gauge Steel (0.060") PBFS19001...1 PBFS19003... PBFS19005... PBFS19007... PBFS19008... PBFS19010... PBFS19012... PBFS19014... PBFS19015... PBFS19017... PBFS19019... PBFS19021... PBFS19022... PBFS19024... PBFS19026... PBFS19028... PBFS19029... PBFS19031... All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com Rack Mount Accessories Panel Width Adaptors • • • • Used for adapting flat 19" or 23" panels for 24" rack mounting. Mounting hardware not included, please order separately. 19" sold in pairs, 23" sold individually (only 1 required). Available in light gray or black. Panel Height Inches 1.75 3.50 5.25 7.00 8.75 10.50 12.25 14.00 For 14 Ga. Steel (0.075") 19" Widths PBAS19001...1 PBAS19003... PBAS19005... PBAS19007... PBAS19008... PBAS19010... PBAS19012... PBAS19014... Units 12 22 32 42 52 6 7 8 1 Specify color code. Light Gray (LG2) or Black (BK2). 23" to 24" adaptors are available in these heights only; substitute "23" for "19" in the part no. 2 Storage Drawer Kit • • • • Complete drawer kit with slides and lock. Available in 3 depths. Rear support brackets included for all depths. Available in light Gray or black. 19" Drawer Kit Part Numbers 16" Deep Drawer RDRW1900316...1 RDRW1900516... RDRW1900716... RDRW1900816... Panel Height 22” Deep Drawer RDRW1900322...1 RDRW1900522... RDRW1900722... RDRW1900822... Inches 3.50 5.25 7.00 8.75 1 Specify 3 digit color code. Light Gray (LG1) or Black (BK1). For 24" panel width versions, substitute “19” with “24” in the part number. Units 2 3 4 5 1 unit = 1.75" Equipment Slides • Sold in pairs. • Mounts on combination rail front flange (not included). Part No. RSLIDE12 RSLIDE16 RSLIDE22 (A) Length 12 16 22 Weight Capacity (Pair) 120 lb 130 lb 120 lb Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 Modular Console System 12" Deep Drawer RDRW1900312...1 RDRW1900512... RDRW1900712... RDRW1900812... Operator Interface Enclosure Series 2000 Modular Console System - NEMA 12, 4, 4X USA: 716.630.7030 Data Subject to change without notice 230 www.hammondmfg.com Series 2000 Modular Console System - NEMA 12, 4, 4X Operator Interface Enclosure Rack Mount Accessories Adjustable Support Angles • Angles mount on accessory rails with either leg used as support depending on requirements. • Slots allow up/down or front/back adjustments. • Made of 14 gauge steel, with dimensions of 1.75" x 1.75". • Finished in black (BK3). • Mounting hardware not included, please order separately. Part No. (Pair) RASA12BK3 RASA16BK3 RASA22BK3 Length (Inches) 9.98 14.95 20.95 Fixed Chassis/Shelf • Can be used as a permanently mounted support shelf between accessory rails or as a pull-out chassis. • Accepts optional slides for pull-out application. • Material is 18 gauge (shelf) and 14 gauge (brackets). • Shelf is 16.8" wide x 0.5" high. • Refer to table at right for depth. Part No. Panel Shelf Bracket • Finished in white. Width Depth (In.) Depth (In.) RASC1912WH2 RASC1916WH2 RASC1922WH2 RASC2412WH2 RASC2416WH2 RASC2422WH2 19 19 19 24 24 24 11.9 15.9 21.9 11.9 15.9 21.9 13.2 14.9 20.9 13.2 14.9 20.9 Modular Console System Equipment Shelf • This closed utility shelf has 1.5 diameter cord access holes in each bottom corner. Fabricated from 18 gauge steel on top, bottom and sides. • Inside dimensions are: 17.2" (wide) x 15.0" (deep). • Height is 1" less than panel space. • Finished in white. • Mounting hardware not included, please order separately. Part No. RASE1900815WH2 RASE1901015WH2 RASE1901215WH2 Panel Height Inches Units 8.75 5 10.50 6 12.25 7 1 unit = 1.75” Adjustable Support Bar • This 16 gauge steel support fastens between accessory rails for support across rear of equipment. • Minor modification required for use with tapped rails. • Finished in black. Part No. RASB19BK1 RASB24BK1 Technical references and CAD downloads available at www.hammondmfg.com 231 Length (Inches) 19 24 All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice www.hammondmfg.com Series 2000 Modular Console System - NEMA 12, 4, 4X Optional Locks & Latches • Field installable. • Interchangeable with standard latches. • Maintains NEMA Type 4, 4X,12, 13 rating. Part No. 2WKL 2SQI7 2SQK7 2TRI7 2TRK7 2SLI 2QPL Description Wing knob lock, zinc die/black 7mm square insert, black 7mm square key, fits 2SQI7 7mm triangle insert, black 7mm triangle key, fits 2TRI7 Slotted insert, black Padlockable quarter turn latch, black Series 2000 Console Casters • • • • • Locking and non-locking versions. Mount directly to plinths. Sold in pairs to provide ability to mix locking and non-locking. Recommend 4 casters for 24"/36" and 6 casters for 48"/60". Weight capacity of 500 lbs. per pair. Part No. 2CCSTL 2CCSTN Type Locking Non-Locking Operator Interface Enclosure Rack Mount Accessories No. of Casters 2 2 Modular Console System Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice 232