Catalog pages - Hammond Manufacturing

www.hammondmfg.com
Accessory Products
Climate Control
Thermostat
• Designed to provide air temperature control and monitoring in cabinets.
• Thermostat NC (Normally Closed) for the control of heaters and heater fans.
• Thermostat NO (Normally Open) for the control of cooling units, or for switching
signal transmitters in case of overheating.
• Available in Fahrenheit or Celsius.
Sensor Element:
Switching difference (hysteresis):
Adjustment Range:
Connection:
Mounting:
Housing:
Color:
Protection:
Approval:
Part No.
SKT011409NC
SKT011409NC-C
SKT011419NO
SKT011419NO-C
Scale
°F
°C
°F
°C
Thermostatic bi-metal
±4°F (±3°K)
30-140°F / 0-60°C
2 pole terminal for AWG 14 (2.5mm2)
Easily installed by clip mounting on 35 mm or 38 mm
DIN rails (included)
Flame retardant plastic UL94VO
Gray (SB)
IP20
UL Recognized Component , cUL Recognized
Component, CE, CSA Listed
Contact
Type
Normally Closed
Normally Closed
Normally Open
Normally Open
Dimensions
Height x Width x Depth
2.83 x 1.57 x 1.4
2.83 x 1.57 x 1.4
2.83 x 1.57 x 1.4
2.83 x 1.57 x 1.4
Technical references and CAD downloads available at www.hammondmfg.com
397
Switching
Capacity
15 A (1) AC 120 V, 10 A (1) AC 250 V
15 A (1) AC 120 V, 10 A (1) AC 250 V
15 A (1) AC 120 V, 10 A (1) AC 250 V
15 A (1) AC 120 V, 10 A (1) AC 250 V
Ship
Wt. lbs
1
1
1
1
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice
www.hammondmfg.com
Accessory Products
Twin Thermostats
• Designed to provide air temperature control and monitoring in cabinets
• Twin thermostats integrates two independently switchable thermostats, unlike
thermostats with changeover contacts, connected devices can be switched in
different temperature ranges.
• Available with N.C/N.O., N.C/N.C., N.O/N.O.
SKTD541
Part Number
SKTD542
SKTD543
SKTD542C
SKTD543C
N.C. / N.C. with spring contact
N.O. / N.O. with spring contact
Heaters and Alarms
Fans and Alarms
+ - 4K
N.C. 240 VAC /10A N.O. 120 VAC / 15 A DC max 30watts
32-140° F / 0-60° C
Screw terminal for AWG 14 / (2.5mm2)
Clip mounting on 35 mm DIN rails
Height 3.17" (80.5mm) Width 2.32" (59mm) Depth 1.5" (38mm)
Flame retardant plastic UL94VO
Light Gray RAL7035
IP20
UL Recognized Component, cUL Recognized Component, CE
SKTD541
SKTD541C
N.C. / N.O. with spring contact
Fan and Heater
SKTD542
Technical references and CAD downloads available at www.hammondmfg.com
SKTD543
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
Climate Control
Scale: ( Fahrenheit)
Scale: (Celsius)
Type of contact:
Suitable for the operation of
Switching tolerance:
Switching Capacity:
Adjustment Range:
Connection:
Mounting:
Dimension
Housing:
Color:
Protection:
Approval:
USA: 716.630.7030
Data Subject to change without notice
398
www.hammondmfg.com
Accessory Products
Mechanical Humidistat
• Mechanical Humidistat regulates the control of heaters or
fans whenever the preset level of relative humidity.
Part No.
SKH600NCC
Dimensions
Height x Width x Depth
3.5 x 1.5 x 1.8
Control Range:
Differential Gap:
Switch Point Accuracy:
Working Temperature Range:
Storage Temperature:
Type of Contact:
Sensor:
Type of Connection:
Color:
Protection Category:
Mounting:
Climate Control
Approval:
40 to 90% r.H.
Approximately 5%
+/- 4% based on 50% r.H.
30°F to 140°F (0°C to 60°C)
-5°F to 180°F (-20°C to 80°C)
Change-over switch
Polyamide band
2-pole clamp, For AWG14 (2.5mm2)
RAL 7035 - Grey
IP20
Easily installed by clip mounting on 35mm DIN rail (7
included)
CE
Electronic Humidity and Temperature Control
• Designed to provide both air temperature and humidity control as well as
monitoring in electrical and electronic enclosures.
• Independently senses the relative humidity and temperature. Resistive and
inductive loads (heaters or filter fans) can be switched.
• Highly effective in ATMs, parking control gates, ticket dispensers and traffic control
systems where equipment is exposed to wide ranging outdoor elements.
Dimensions
Part No.
Height x Width x Depth
SKTH012009230
3.03 x 2.36 x 1.69
SKTH012009
3.03 x 2.36 x 1.69
Temperature Range:
Switching difference (hysteresis):
Humidity range:
Response time humidity:
Function Indication:
Life expectancy:
Mounting :
Housing :
Color:
Protection:
Approval:
Technical references and CAD downloads available at www.hammondmfg.com
399
Switching Capacity
NOC FAN
AC 120 V - 2A
NOC FAN
AC 240 V - 2A
NCC Heater
AC 120 V - 5A
NCC Heater
AC 240 V - 5A
DC 30 Watts
Switching Capacity
NC: AC 240 V - 6A resistive, 1A inductive
NO: AC 240 V - 8A resistive, 1.6A inductive
NC: AC 120 V - 6A resistive, 1A inductive
NO: AC 120 V - 8A resistive, 1.6A inductive
DC 24 V - 4A resistive
32°F to 140°F (0°C to 60°C)
Approximately 2°K
50% to 90% relative humidity
Approximately 5 seconds
LED
50,000 cycles
Easily installed by clip mounting on 35mm DIN rail
Flame retardant plastic UL94VO
Gray
IP20
UL Recognized Component, cUL Recognized
Component, CE
All dimensions in inches unless specified otherwise
Quality Products. Service Excellence.
© Hammond Manufacturing
Canada: 519.822.2960 or 905.456.3770
USA: 716.630.7030
Data Subject to change without notice