8 7 6 5 160.79 mm [6.330 in] 140.79 mm [5.543 in] 88.84 mm 22.70 mm [0.894 in] [3.498 in] (Inlay Length) D A 3 2 1 15.00 mm [0.591 in] D 2.00 mm [0.079 in] (Inlay Depth) 4.60 mm [0.181 in] 19.60 mm [0.772 in] 4 B B 113.78 mm [4.480 in] (Inlay Width) 70.75 mm [2.785 in] 17.20 mm [0.677 in] (Inner Box Depth) 8.50 mm 12.50 mm [0.492 in] (Inner Lid Depth) [0.335 in] 5.00 mm X4 C [0.197 in] A ENCLOSURE ASSEMBLY TOP VIEW SECTION A-A END VIEW OF ASSEMBLY C 6.00 mm [0.236 in] Polycarbonate Version Only 6.50 mm [0.256 in] 6.00 mm [0.236 in] 37.70 mm [1.484 in] File #E65324 NEMA 4, 4X Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory [email protected] SECTION B-B (SIDE VIEW OF ASSEMBLY) 120.0 mm [4.723 in] 107.00 mm [4.213 in] B NOTE 3.50 mm THRU X4 98.00 mm [3.858 in] [0.138 in THRU X4] 98.00 mm [3.858 in] 7.00 mm 2.25 mm 6.00 mm X8 [0.276 in] [0.089 in 0.236 in X8] Purchased assembly includes styled box, flanged lid, 4 cover screws, and preformed silicone gasket. General Purpose ABS version is not UL approved. (Matl UL94 - HB) Polycarbonate version is UL 508 approved. (Matl UL94 - V0) B Recommended Cover screw torque -- 2.5 lbf-in (30 cN-m) 1555NF 114.00 mm [4.488 in] 98.00 mm [3.858 in] 29.00 mm [1.142 in] 75.00 mm [2.953 in] 56.00 mm [2.205 in] 120.0 mm [4.723 in] 1555NF Regular Enclosure 100.00 mm [3.937 in] General Purpose ABS RAL‐7035 Polycarbonate RAL‐7035 56.00 mm [2.205 in] 107.00 mm [4.213 in] ACCESSORIES 72.00 mm 111.00 mm [2.835 in] [4.370 in] Steel Inner Panels Steel Panel / P.C. Board Self Tapping Screw [#6 X 1/4" (6.4mm) Plated] Cover Screws (Pkg 4) [M4 X 20mm Stainless Steel] 98.00 mm [3.858 in] 58.00 mm [2.283 in] 2.25 mm 6.00 mm X10 95.00 mm [3.740 in] A 114.00 mm [4.488 in] 7 5 SC1554 1555NF17 FLANGED LID INSIDE VIEW 6 1555NFPL 1598ATS100 A 111.00 mm [4.370 in] BOX INSIDE VIEW 8 92.00 mm [3.622 in] [0.089 in 0.236 in X10] 1555NF17GY 1555N2F17GY 4 3 2 1