SO-8 RoHS Compliance Document Contents: 1. Composition 2. Solder Reflow 3. Tin Whisker Report The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. Jan 2015 SO-8 BOM 1 Component Chip Material Name Silicon Material Mass (g) 0.00262 Encapsulant Epoxy Resin 0.05006 Lead Frame Copper 0.02426 Die Attach Soft Solder 0.00193 Wire Bond Lead Finish Copper Matte Tin* 0.00030 0.00146 Si 7440-21-3 0.00262 SiO2 7631-86-9 0.04405 Material Analysis Weight (%) 100% 88% Epoxy Other Cu Fe Ag Epoxy Other Cu Sn Total Weight (g) 90598-46-2 7440-50-8 7439-89-6 7440-22-4 90598-46-2 7440-50-8 7440-31-5 0.00501 0.00100 0.02363 0.00063 0.00145 0.00039 0.00009 0.00030 0.00146 10% 2% 97% 3% 75% 20% 5% 100% 100% Element Name Composition CAS # Substance Mass (g) % of Total Weight 3.2% 54.6% 6.2% 1.2% 29.3% 0.8% 1.8% 0.5% 0.1% 0.4% 1.8% 0.08063 *Tin whisker mitigation strategy is 150 °C, 1 hour anneal within 24 hours of tin plating. This part is compliant with EU Directive 2011/65/EU (RoHS Directive) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex III. Further part complies with 3 reflow cycles per JEDEC J-STD-020 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 1 Jan. 2015 SO-8 BOM 2 Component Chip Material Name Silicon Material Mass (g) Element Name Composition CAS # Substance Mass (g) 0.00262 Si 7440-21-3 0.00262 SiO2 7631-86-9 0.04405 Material Analysis Weight (%) 100% 88% Epoxy Other Cu Fe Ag Epoxy Other Au Sn Total Weight (g) 90598-46-2 7440-50-8 7439-89-6 7440-22-4 90598-46-2 7440-57-5 7440-31-5 0.00501 0.00100 0.02363 0.00063 0.00145 0.00039 0.00009 0.00030 0.00146 10% 2% 97% 3% 75% 20% 5% 100% 100% Encapsulant Epoxy Resin 0.05006 Lead Frame Copper 0.02426 Die Attach Silver Epoxy 0.00193 Wire Bond Lead Finish Gold Matte Tin* 0.00030 0.00146 % of Total Weight 3.2% 54.6% 6.2% 1.2% 29.3% 0.8% 1.8% 0.5% 0.1% 0.4% 1.8% 0.08063 *Tin whisker mitigation strategy is 150 °C, 1 hour anneal within 24 hours of tin plating. This part is compliant with EU Directive 2011/65/EU (RoHS Directive) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex III. Further part complies with 3 reflow cycles per JEDEC J-STD-020 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 2 Jan. 2015 SO-8 BOM 3 Component Material Name Material Mass (g) Element Name Composition CAS # Substance Mass (g) 0.00262 Si 7440-21-3 0.00262 SiO2 7631-86-9 0.04405 Material Analysis Weight (%) 100% 88% Epoxy Other Cu Fe Pb Sn Ag Cu Sn Total Weight (g) 90598-46-2 7440-50-8 7439-89-6 7439-92-1 7440-31-5 7440-22-4 7440-50-8 7440-31-5 0.00501 0.00100 0.02363 0.00063 0.00179 0.00010 0.00004 0.00030 0.00146 10% 2% 97% 3% 92.5% 5% 2.5% 100% 100% Chip Silicon Encapsulant Epoxy Resin 0.05006 Lead Frame Copper 0.02426 Die Attach Soft Solder 0.00193 Wire Bond Lead Finish Copper Matte Tin* 0.00030 0.00146 % of Total Weight 3.2% 54.6% 6.2% 1.2% 29.3% 0.8% 2.2% 0.1% 0.1% 0.4% 1.8% 0.08063 *Tin whisker mitigation strategy is 150 °C, 1 hour anneal within 24 hours of tin plating. This part is compliant with EU Directive 2011/65/EU (RoHS Directive) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex III. Further part complies with 3 reflow cycles per JEDEC J-STD-020 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 3 Jan. 2015 SO-8 Test Definition Room Temperature Humidity Temperature Humidity Unbiase Temperature Cycling Test Conditions Inspection Total Interval Class Duration 1 and 2 Class 1 and 2 Products Products Maximum Whisker Length (µm) 30± 2°C/60± 3%RH 1000 hours 4000 hours 20 55± 3°C/85± 3% RH 1000 hours 4000 hours 20 -40 to 55°C to 80 to 95°C, air to air, 10 min soak, approx 3 500 cycles 1500 cycles 45 Tin Whisker testing per JESD201, Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finish Tin Whisker Results (number of failing whiskers) Test Room Temperature Humidity Storage Temperature Humidity Test Temperature Cycling 1000 Hours 2000 Hours 3000 Hours 4000 Hours 0/24 0/24 0/24 0/24 0/24 0/24 0/24 0/24 500 Cycles 1000 Cycles 1500 Cycles 0/24 0/24 0/24 This part is compliant with EU Directive 2011/65/EU (RoHS Directive) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex III. Further part complies with 3 reflow cycles per JEDEC J-STD-020 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 4 Jan. 2015