PDIP-14 RoHS Compliance Document Contents: 1. Composition 2. Tin Whisker Report The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. July 2014 PDIP-14 BOM 1 Component Material Name Material Mass (g) Element Name Composition Si SiO2 Epoxy Other Cu Fe Ag Epoxy Other Au Sn Total Weight (g) Chip Silicon 0.00250 Encapsulant Epoxy Resin 0.67133 Lead Frame Copper 0.29256 Die Attach Silver Epoxy 0.00089 Wire Bond Lead Finish Gold Matte Tin* 0.00064 0.02148 CAS # Substance Mass (g) 7440-21-3 7631-86-9 90598-46-2 7440-50-8 7439-89-6 7440-22-4 90598-46-2 7440-57-5 7440-31-5 0.00250 0.46620 0.17649 0.02864 0.28441 0.00815 0.00070 0.00014 0.00005 0.00064 0.02148 Material Analysis Weight (%) 100% 69% 26% 4% 97% 3% 79% 15% 6% 100% 100% % of Total Weight 0.3% 47.1% 17.8% 2.9% 28.7% 0.8% 0.1% 0.0% 0.0% 0.1% 2.2% 0.98940 *Tin whisker mitigation strategy is 150 °C, 1 hour anneal within 24 hours of tin plating. PDIP-14 BOM 2 Component Material Name Material Mass (g) Element Name Composition Si SiO2 Epoxy Other Cu Fe Ag Epoxy Other Cu Sn Total Weight (g) Chip Silicon 0.00250 Encapsulant Epoxy Resin 0.67133 Lead Frame Copper 0.29256 Die Attach Silver Epoxy 0.00089 Wire Bond Lead Finish Copper Matte Tin* 0.00064 0.02148 CAS # Substance Mass (g) 7440-21-3 7631-86-9 90598-46-2 7440-50-8 7439-89-6 7440-22-4 90598-46-2 7440-50-8 7440-31-5 0.00250 0.46620 0.17649 0.02864 0.28441 0.00815 0.00070 0.00014 0.00005 0.00064 0.02148 Material Analysis Weight (%) 100% 69% 26% 4% 97% 3% 79% 15% 6% 100% 100% % of Total Weight 0.3% 47.1% 17.8% 2.9% 28.7% 0.8% 0.1% 0.0% 0.0% 0.1% 2.2% 0.98940 *Tin whisker mitigation strategy is 150 °C, 1 hour anneal within 24 hours of tin plating. This part is compliant with EU Directive 2002/95/EC (RoHS) and does not contain lead, mercury, cadmium (0.01%), hexavalent chromium, PBB or PBDE in concentrations greater than 0.1%, except as permitted by Annex (7). The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 1 July 2014 PDIP-14 Test Definition Room Temperature Humidity Storage Temperature Humidity Unbiased Test Conditions Inspection Total Interval Class Duration 1 and 2 Class 1 and 2 Products Products Maximum Whisker Length (µm) 30± 2°C/60± 3% RH 1000 hours 4000 hours 20 55± 3°C/85± 3% RH 1000 hours 4000 hours 20 -40 to 55°C to 80 to 95°C, 500 cycles 1500 cycles air to air, 10 min soak, approx 3 cycles /hours Tin Whisker testing per JESD201, Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finish Temperature Cycling 45 Tin Whisker Results (number of failing whiskers) Test Room Temperature Humidity Storage Temperature Humidity Unbiase Test d Temperature Cycling 1000 Hours 2000 Hours 3000 Hours 4000 Hours 0/24 0/24 0/24 0/24 0/24 0/24 0/24 0/24 500 Cycles 0/24 1000 Cycles 0/24 1500 Cycles 0/24 The information contained in this document is provided without any warranty, either expressed or implied, and IR specifically disclaims any and all liability, including but not limited to consequential or indirect damages. 2 July 2014