ICCD CAMERA UV to NIR WITH HIGH-SPEED ELECTRONIC SHUTTER CAMERA C10054 SERIES OVERVIEW C10054 series is a very compact Intensified CCD camera with high-speed shutter function. The minimum shutter time is 5 ns, and progressive scan type is added to the selection for readout CCD format newly. The progressive scan type is very easy to adjust the timing between shutter time of Image Intensifier and exposure time of CCD chip compared with conventional TV format type. C10054 series is also built in a high performance Image Intensifier. By selecting for an built-in Image Intensifier, this ICCD camera can take good continuous images or capture instantaneous images from visible range to invisible range such as UV light or near infrared light. FEATURES APPLICATIONS ●Compact: Camera head volume (Approx. 1/2 compared to the conventional type) ●Progressive scan type available ●High Speed Shutter: 5 ns Min. ●High Sensitivity: GaAsP/ GaAs Photocathode Wide spectral range: Multialkali photocathode ●High Resolution: 480 TV Lines (C10054-x3 type) ●Analyzing High-speed Light-emission Phenomena •Combustion Flame of Engines •Discharge Event •Plasma •Fluorescence ●Measuring Ultra Low-light-level Phenomena •Microscope •Two-dimensional Spectroscopy •Bio- and Chemiluminescence ●Observing High-speed Moving Objects •Turbine Blade Motion •Inkjet ●Night Vision SELECTION GUIDE TV Format Type EIA C10054-01 C10054-02 C10054-03 C10054-04 C10054-05 C10054-06 Signal System TV Format Type CCIR C10054-11 C10054-12 C10054-13 C10054-14 C10054-15 C10054-16 Stages Limiting Spectral Input Window Photocathode Response Range of Resolution Material Material MCP (TV Lines) (Progressive scan type) (nm) 1 C10054-21 Borosilicate 470 GaAsP 280 to 720 2 C10054-22 Glass 450 1 C10054-23 Synthetic 480 Multialkali 185 to 900 2 C10054-24 Silica 420 1 C10054-25 Borosilicate 470 GaAs 370 to 920 2 C10054-26 Glass 450 Non-TV Format Type SPECIFICATIONS ●IMAGE INTENSIFIER Parameter Luminous Sensitivity Radiant Sensitivity A Quantum Efficiency A Input Window Material Photocathode Material Spectral Response Range Peak Wavelength Phosphor Screen Material Minimum Photocathode Illuminance Limiting Resolution B Image Magnification Aat peak wavelength C10054-x1 C10054-x2 700 214 50 Borosilicate Glass GaAsP 280 to 720 530 1 × 10-6 470 4 × 10-7 450 C10054-x3 C10054-x4 230 150 53 47 15 14 Synthetic Silica Multialkali 185 to 900 430 P43 4 × 10-5 4 × 10-7 480 420 1 C10054-x5 C10054-x6 1200 181 23 Borosilicate Glass GaAs 370 to 920 830 1 × 10-6 470 4 × 10-7 450 Unit µA/lm mA/W % — — nm nm — lx TV Lines — BTV format type ●POWER SUPPLY AND ENVIRONMENT SPECIFICATIONS Parameter Power Requirement Power Consumption Operating Ambient Temperature Storage Temperature Operating / Storage Ambient Humidity Weight Dimensions (W × H × D) Description / Value +11 to +13 4.2 0 to 40 -20 to +50 Less than 70 % (no condensation) 1040 66 × 99 × 91 Unit V W °C °C % g mm ●SHUTTER Parameter Operating mode Internal Synchronized Shuttering Time Shuttering Time Shuttering Time Setting External Input Impedance Shutter Maximum Shutter Repetition Shutter Delay Time Description / Value DC Internal Synchronized Shutter External Shutter 0.1 / 1 / 10 / 100 (Manual selection for 4 modes) 5 ns to DC TTL Positive Logic 50 2 75 Unit — µs — — Ω kHz ns ●PROTECTIVE FUNCTION Parameter Shutter Repetition Limit Max. Indication Detection Method Warning Indication Over-light Operation Indication Protection Delay Time for protection circuit to function after event of over-light (Max.) Protection Circuit Reset Description / Value 2 kHz Red LED is lit continuously Detect the average value of video signals Red LED flashes (on rear of camera and remote controller operation panel) Red LED is lit continuously (on rear of camera and remote controller operation panel) 500 ms Reset switch on the remote controller or re-turning on of power supply ●CCD CAMERA Parameter Signal Output Method Suffix Lens Mount Effective Number of Cells (H × V) Cell Size Image Intensifier to CCD Coupling Method Effective Image Area Scanning CCD Image Storage Method Gamma Image Distortion CCD Amplifier Gain Description / Value Non-TV Format Type TV Format Type CCIR EIA (Progressive scan type) -1x -0x -2x C-mount 752(H) × 582(V) 768(H) × 494(V) 659(H) × 494(V) 8.6(H) × 8.3(V) 8.4(H) × 9.8(V) 9.9(H) × 9.9(V) Fiber Optic Plate Coupling (Magnification ratio: 2: 1) 12.8 × 9.6 2: 1 interlace Non-interlace Frame / Field (selected by switch on the rear panel) Progressive scan ON / OFF OFF Less than 1 AGC / Manual (0 to 18 dB) Fix / Manual Unit — — — — µm — mm — — — % — SPECTRAL RESPONSE CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%) 103 TAPPB0092EC C10054-x5/-x6 GaAs PHOTOCATHODE C10054-x3/-x4 MULTIALKALI PHOTOCATHODE 102 101 C10054-x1/-x2 GaAsP PHOTOCATHODE 100 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 10-1 100 200 300 400 500 600 700 800 900 1000 WAVELENGTH (nm) SETUP EXAMPLE WITH OPTICAL ACCESSORIES VIDEO SIGNAL OUTPUT to TV monitor or image capture board * OBJECTIVE LENS WITH C-MOUNT AC ADAPTER A10059-01 C10054 SERIES CAMERA CABLE A5963 SERIES REMOTE CONTROLLER MICROSCOPE HEAD AC100 V to 240 V AC CABLE REMOTE CONTROLLER BNC CABLE (50 Ω) ATTACHMENT FOR MICROSCOPE EXTERNAL SHUTTER INPUT (TTL, POSITIVE LOGIC) Accessories (option) NOTE *) Non-TV format type can't display the images by using a standard TV or video. Need to prepare a image capture board or equivalent for obtaining the image of progressive scan type. TAPPC0143EC DIMENSIONAL OUTLINES (Unit: mm) CAMERA HEAD LENS MOUNT (C-MOUNT) 1 66 75 Ω TERMINATION SWITCH 91 DC IN / SYNC (12 PIN) CCD SHUTTER MODE SELECTION SWITCH CCD GAIN ADJUSTABLE KNOB HD / VD INPUT / OUTPUT SWITCH 95 SHUTTER TIME SETTING SWITCH 74 POWER / PROTECTION DISPLAY LED IMAGE INTENSIFIER GAIN ADJUSTABLE KNOB CONNECTOR FOR REMOTE CONTROLLER 4 EXTERNAL SHUTTER INPUT (BNC) FRONT VIEW SIDE VIEW REAR VIEW IMAGE INTENSIFIER OPERATION MODE SELECTOR SWITCH NORMAL / GATE 30 40 40 MOUNTING SCREW (1/4" -20 UNC) 31.5 30 (4-M3 DEPTH 4) TAPPA0083EC BOTTOM VIEW REMOTE CONTROLLER 2000 48 CONNECTION CABLE TO HEAD REAR VIEW POWER / PROTECTION DISPLAY LED GAIN ADJUSTMENT KNOB RESET SWITCH 111 IMAGE INTENSIFIER ON / OFF SWITCH REMOTE CONTROLLER 70 TOP VIEW SIDE VIEW (WEIGHT: Approx. 300 g) TAPPA0084EA Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2007 Hamamatsu Photonics K.K. WEB SITE www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: [email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: [email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: [email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: [email protected] North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: [email protected] TAPP1065E02 Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: [email protected] NOV. 2007 IP