MODULE Signal processing unit for photodiode module C10475 Specifically designed for photodiode modules (C10439 series) C10475 is a signal processing unit specifically designed to convert the output of a photodiode module (C10439 series) into digital signals. Highresolution digital output (16 bits) can be obtained through serial connection (RS-232C) to a PC. The sample software that comes with C10475 allows easily obtaining measurement data using the PC. The measurement data can also be recorded in the internal memory (data logger function). C10475 can also operate on batteries for portability. Features Applications l High-resolution digital output (16-bit) l Data logger function l Low battery function l Choice of internal battery (+9 V) or AC adapter (+12 V) operation l Supplies power to the photodiode module l Precision photometry l Light source power monitors l Fluorescence detection of printed matter l Illuminometers l Color difference meters l Refractometers l Flowmeters, etc. ■ Absolute maximum ratings Parameter Supply voltage Maximum input voltage Operating temperature *1 Storage temperature *1 *1: No condensation Symbol Vcc Max. Vin Max. Topr Tstg Value +14 ±10 0 to +50 -10 to +60 Unit V V °C °C ■ Specifications (Vcc=+12 V, Ta=25 °C, unless otherwise noted) Parameter Supply voltage Input voltage Current consumption *2 Interface A/D readout cycle *2: Dark state Symbol Vcc Vin Icc - Min. Typ. Max. +6 +12 +14 -5 +5 20 RS-232C, 19200 bps, 8-bit, Non-parity, 2-stop bit 50 - Unit V V mA ms PRELIMINARY DATA Mar. 2007 1 Signal processing unit for photodiode module ■ Connection example SIGNAL PROCESSING UNIT FOR PHOTODIODE MODULE C10475 AC ADAPTER (not needed when C10475 operates on battery) CONNECTION CABLE FOR PHOTODIODE MODULE RS-232C CABLE BNC CABLE AC 100 to 240 V 50/60 Hz PHOTODIODE MODULE C10439 SERIES PC (with supplied software installed) ■ Sample software (accessory) Data logger setting range Measurement interval: 50 ms to 1 min (50 ms interval) Measurement count: 32000 Max. Measurement interval × Meassurement count: 20 hours Max. 2 Secure with optical bench rod, etc. KACCC0366EB C10475 Signal processing unit for photodiode module C10475 ■ Dimensional outline (unit: mm) RS-232C CONNECTOR FOR DIGITAL OUTPUT JEY-9P-1A3A90 (JST, 9-PIN, MALE) 12V 1A AUTO ZERO PUSH START DC INPUT DIGITAL OUTPUT 110 BNC CONNECTOR FOR PHOTODIODE MODULE DATA LOG PD SIGNAL PROCCESING UNIT C10475 INPUT ON OFF POWER HEAD POWER SUPPLY CONNECTOR FOR PHOTODIODE MODULE HR10A-7R-4S (HIROSE ELECTRIC, 10-PIN, FEMALE) 30 100 KACCA0206EA ■ Accessories · AC adapter · BNC cable 100 cm · Cable for photodiode module 100 cm CONNECTOR HR10A-7P-4S (HIROSE ELECTRIC, 4-PIN, FEMALE) CONNECTOR HR10A-7P-4P (HIROSE ELECTRIC, 4-PIN, MALE) KACCA0207EA · Sample software CD-ROM (compatible OS: Windows 7 *3) *3: Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Note: RS-232C cable is not supplied with C10475. For RS-232C cables, use a commercially available cable with 9-pin D-sub connectors (female - female, straight cable). 3 Signal processing unit for photodiode module C10475 Information described in this material is current as of July, 2014. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P.O.Box 6910, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Thorshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int. 6, 20020 Arese, (Milano), Italy, Telephone: (39) 02-935-81-733, Fax: (39) 02-935-81-741 China: Hamamatsu Photonics (China) Co., Ltd.: 1201 Tower B, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KACC1140E04 Jul. 2014 DN