CPC1009N

CPC1009N
100V Normally-Open Single-Pole
4-Pin SOP OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Load Voltage
Load Current
On-Resistance (max)
Output Leakage, Off-State
Ratings
100
150
8
20
Units
VP
mArms / mADC

nA
Description
CPC1009N is a miniature low voltage, low
on-resistance, low off-state leakage, normally-open
(1-Form-A) solid state relay in a 4-pin SOP package.
The MOSFET switches and photovoltaic die use IXYS
Integrated Circuits Division’s patented OptoMOS®
architecture to provide 1500 Vrms of input to output
isolation. The optically coupled output is controlled by
a highly efficient infrared LED.
Features
• Extremely Low Output Leakage: 20nA
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• Low Drive Power Requirements
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Wave Solderable
• Tape & Reel Version Available
The CPC1009N uses IXYS Integrated Circuits
Division’s state of the art double-molded vertical
construction to produce one of the world’s smallest
4-pin relays, which offers board space savings of
20% over the competitor’s larger 4-pin SOP relay.
Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security Systems
• Aerospace
• Industrial Controls
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1172007
• EN/IEC 60950-1 Certified Component:
Certificate B 13 12 82667 003
Ordering Information
Part #
CPC1009N
CPC1009NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
3
2
Load
Load
Switching Characteristics
of Normally-Open Devices
Form-A
IF
90%
10%
ILOAD
ton
DS-CPC1009N-R06
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC1009N
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation
Total PowerDissipation 1
Isolation voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
100
5
50
1
70
400
1500
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Derate linearly 3.33 mW / ºC
Electrical Characteristics @ 25ºC (Unless Otherwise Noted)
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Input/Output Characteristics
Capacitance, Input to Output
1
2
2
Conditions
Symbol
Min
Typ
Max
Units
t=10ms
IL=150mA
VL=100VP , T=115ºC
IL
ILPK
RON
ILEAK
-
5
-
150
±350
8
20
mArms / mADC
mAP

nA
IF=0mA, VL=50V, f=1MHz
ton
toff
COUT
-
6
2
0.5
-
IL=150mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.3
0.9
-
0.87
0.86
1.2
-
2
1.4
10
mA
mA
V
A
CIO
-
1
-
pF
IF=5mA, VL=10V
VIO=0V, f=1MHz
Load current derates linearly from 150mA @ 25oC to120mA @85oC.
Measurement taken within 1 second of on-time.
www.ixysic.com
ms
pF
R06
INTEGRATED CIRCUITS DIVISION
CPC1009N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
25
Device Count (N)
Device Count (N)
30
25
20
15
10
Typical Turn-On Time
(N=50, IF=5mA, IL=150mA)
5
0
20
15
10
5
1.19
1.21
1.23
1.25
0.25
0.30
LED Forward Voltage Drop (V)
Typical IF for Switch Operation
(N=50, IL=100mA)
15
10
5
0.75
0.80
0.85 0.90 0.95
LED Current (mA)
1.00
10
5
0.21
0.22
0.23 0.24 0.25 0.26
Turn-Off Time (ms)
0.27
Typical On-Resistance Distribution
(N=50, IL=150mA)
35
30
20
15
10
5
25
20
15
10
5
0
0
15
0.55
Device Count (N)
20
0.35 0.40 0.45 0.50
Turn-On Time (ms)
Typical IF for Switch Dropout
(N=50, IL=100mA)
25
Device Count (N)
Device Count (N)
25
20
0
0
1.17
Typical Turn-Off Time
(N=50, IF=5mA, IL=150mA)
25
Device Count (N)
35
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
0
0.70
1.05
0.75
0.80
0.85
0.90
0.95
1.00
4.40
4.60
LED Current (mA)
4.80
5.00
5.20
5.40
5.60
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
106
IF=50mA
IF=30mA
IF=20mA
IF=10mA
IF=5mA
1.2
1.0
0.8
-40
-20
0
20
40
60
Temperature (ºC)
80
100
120
124
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Typical Turn-Off Time
vs. LED Forward Current
(IL=120mA)
0.7
0.6
Turn-Off Time (ms)
1.4
Turn-On Time (ms)
LED Forward Voltage Drop (V)
1.6
112 115 118 121
Blocking Voltage (VP)
Typical Turn-On Time
vs. LED Forward Current
(IL=120mA)
Typical LED Forward Voltage Drop
vs. Temperature
1.8
109
0.5
0.4
0.3
0.2
0.1
0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10
15
20
25
30
35
40
45
50
LED Forward Current (mA)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R06
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1009N
-40
3.0
-20
0
20
40
60
80
Steady State
4
-20
0
20
40
60
80
0
100
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Typical IF for Switch Operation
vs. Temperature
(IL=100mA)
Typical IF for Switch Dropout
vs. Temperature
(IL=100mA)
Typical Load Current vs. Load Voltage
(IF=5mA)
3.0
2.0
1.5
1.0
0.5
150
2.0
1.5
1.0
-20
0
20
40
60
80
50
0
-50
-150
-1.5
0
100
100
-100
0.5
0
-40
-20
0
20
40
60
80
100
-1.0
-0.5
0
0.5
1.0
Temperature (ºC)
Temperature (ºC)
Load Voltage (V)
Typical Maximum Load Current
vs. Temperature
Typical Blocking Voltage
vs. Temperature
Typical Leakage vs. Temperature
Measured Across Pins 3&4
(VL=100VP)
122
1.6
180
121
1.4
170
160
150
140
IF=10mA
130
IF=5mA
120
120
119
118
117
110
116
100
115
-20
0
20
40
60
80
100
120
Leakage (nA)
Blocking Voltage (VP)
190
-40
Instantaneous
IF=5mA
6
2
2.5
-40
8
Temperature (ºC)
LED Current (mA)
LED Current (mA)
IF=10mA
IF=5mA
IF=5mA
IF=10mA
10
Temperature (ºC)
2.5
Load Current (mA)
12
-40
100
Typical On-Resistance vs. Temperature
(IL=150mA)
On-Resistance (:)
IF=5mA
IF=10mA
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
Typical Turn-Off Time vs. Temperature
(IL=100mA)
Load Current (mA)
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
Typical Turn-On Time vs. Temperature
(IL=100mA)
Turn-Off Time (ms)
Turn-On Time (ms)
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
-20
0
20
40
60
Temperature (ºC)
0.6
30
20
10
0
50
Load Voltage (V)
75
100
80
100
0
-20
20
40
60
80
100
120
Temperature (ºC)
Energy Rating Curve
Load Current (A)
Output Capacitnace (pF)
0.8
0
-40
40
25
1.0
0.2
Output Capacitance vs. Load Voltage
(IF=0mA, f=1MHz)
0
1.2
0.4
Temperature (ºC)
50
1.5
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
10s
100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R06
INTEGRATED CIRCUITS DIVISION
CPC1009N
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1009N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC1009N
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R06
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1009N
MECHANICAL DIMENSIONS
CPC1009N
4.089 ± 0.203
(0.161 ± 0.008)
Recommended PCB Land Pattern
0.200 ± 0.025
(0.008 ± 0.001)
0.60
(0.0217)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.432 ± 0.127
(0.017 ± 0.005)
5.60
(0.2205)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
1.30
(0.0512)
2.184 Max
(0.086 Max)
2.54
(0.10)
Pin to package standoff:
0.0637 ± 0.0383
(0.0025 ± 0.0015)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
CPC1009NTR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00
(0.472)
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Dimensions
mm
(inches)
Embossed
Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
6
Specification: DS-CPC1009N-R06
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
9/24/2014