CPC1014N

CPC1014N
60V Normally-Open Single-Pole
4-Pin SOP OptoMOS® Relay
INTEGRATED CIRCUITS DIVISION
Parameter
Blocking Voltage
Load Current
On-Resistance (max)
LED Current to operate
Rating
60
400
2
2
Units
VP
mArms / mADC

mA
Features
• Designed for use in security systems complying
with EN50130-4
• 1500Vrms Input/Output Isolation
• Small 4-Pin SOP Package
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Immune to radiated EM fields
• Wave Solderable
• Tape & Reel Version Available
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Description
The CPC1014N is a miniature single-pole,
normally-open (1-Form-A) solid state relay in a
4-pin SOP package that employs optically coupled
MOSFET technology to provide 1500Vrms of input
to output isolation. The super efficient MOSFET
switches and photovoltaic die use IXYS Integrated
Circuits Division’s patented OptoMOS architecture.
The optically coupled output is controlled by a highly
efficient infrared LED.
IXYS Integrated Circuits Division’s state of the art,
double-molded vertical construction packaging makes
the CPC1014N one of the world’s smallest relays. It
offers board space savings of at least 20% over the
competitor’s larger 4-pin SOP relay.
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1172007
• EN/IEC 60950-1 Certified Component:
Certificate B 13 12 82667 003
Ordering Information
Part #
CPC1014N
CPC1014NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
3
2
Load
Load
Switching Characteristics
of Normally-Open Devices
Form-A
IF
90%
10%
ILOAD
ton
DS-CPC1014N-R04
www.ixysic.com
toff
1
INTEGRATED CIRCUITS DIVISION
CPC1014N
Absolute Maximum Ratings @ 25ºC
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation
Total Power Dissipation 1
Isolation Voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
60
5
50
1
70
400
1500
-40 to +85
-40 to +125
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to the
device. Functional operation of the device at conditions beyond
those indicated in the operational sections of this data sheet is
not implied.
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Typical values are characteristic of the device at +25°C, and
are the result of engineering evaluations. They are provided for
information purposes only, and are not part of the manufacturing
testing requirements.
Derate linearly 3.33 mW / ºC
Electrical Characteristics @ 25ºC
Parameter
Output Characteristics
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics
Input Control Current to Activate 3
Input Control Current to Deactivate
Input Voltage Drop
Reverse Input Current
Common Characteristics
Capacitance, Input to Output
1
2
3
2
Conditions
Symbol
Min
Typ
Max
Units
IF=2mA
t <10ms
IL=400mA
VL=60VP
IL
ILPK
RON
ILEAK
-
-
400
±1
2
1
mArms / mADC
AP

IF=0mA, VL=50V, f=1MHz
ton
toff
COUT
-
0.47
0.22
25
2
1
-
IL=400mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.1
0.9
-
0.25
0.2
1.2
-
2
1.4
10
mA
mA
V
µA
VIO=0V, f=1MHz
CIO
-
1
-
pF
IF=5mA, VL=10V
µA
ms
pF
Load current derates linearly from 400mA @ 25oC to 200mA @80oC.
Measurement taken within 1 second of on-time.
For applications requiring high temperature operation (greater than 60oC) a minimum LED drive current of 4mA is recommended.
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1014N
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
15
10
5
15
10
5
1.255 1.260 1.265 1.270
LED Forward Voltage (V)
25
Device Count (N)
15
10
5
0
0.40
0.45 0.50 0.55 0.60
Turn-On Time (ms)
0.55
20
15
10
5
0.18
0.20 0.22 0.24
LED Current (mA)
0.26
0.65
0.75
0.85
0.95
Turn-Off Time (ms)
1.05
Typical On-Resistance Distribution
(N=50, IF=1mA, IL=400mA)
25
0
0.16
10
0.65
Typical IF for Switch Dropout
(N=50, IL=400mA)
25
20
15
0
0.35
1.275
Typical IF for Switch Operation
(N=50, IL=400mA)
20
5
Device Count (N)
1.250
Device Count (N)
25
20
0
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=100mA)
30
Device Count (N)
20
Typical Turn-On Time
(N=50, IF=5mA, IL=100mA)
25
Device Count (N)
Device Count (N)
25
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
20
15
10
5
0
0.28
0.16
0.18
0.20
0.22
0.24
LED Current (mA)
0.26
0.505 0.510 0.515 0.520 0.525 0.530 0.535
On-Resistance (:)
Typical Blocking Voltage Distribution
(N=50)
35
Device Count (N)
30
25
20
15
10
5
0
63.5
IF=50mA
1.5
Turn-On Time (ms)
LED Forward Voltage (V)
1.6
IF=20mA
1.4
1.3
1.2
1.1
1.0
-40
IF=10mA
IF=5mA
IF=2mA
-20
0
20
40
Time
60
80
100
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
64.5 65.0 65.5 66.0
Blocking Voltage (VP)
66.5
Turn-On Time vs. LED Forward Current
(IL=80mA)
0.7
Turn-Off Time vs. LED Forward Current
(IL=80mA)
0.6
Turn-Off Time (ms)
Typical LED Forward Voltage Drop
vs. Temperature
64.0
0.5
0.4
0.3
0.2
0.1
0
0
5
10
15
20
25
30
35
40
LED Forward Current (mA)
45
50
0
5
10 15 20 25 30 35 40
LED Forward Current (mA)
45
50
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.ixysic.com
3
INTEGRATED CIRCUITS DIVISION
CPC1014N
IF=5mA
IF=10mA
0
20
40
60
80
100
IF=10mA
-20
0
20
40
60
80
Steady State
0.6
0.5
0.4
0.3
-20
-40
100
0
20
40
60
80
100
Typical IF for Switch Operation
vs. Temperature
(IL=200mA)
Typical IF for Switch Dropout
vs. Temperature
(IL=200mA)
Typical Load Current vs. Load Voltage
(IF=2mA)
0.36
0.24
0.20
0.32
0.28
0.24
0.20
0.16
-20
0
20
40
60
Temperature (ºC)
80
-40
100
Blocking Voltage (VP)
500
400
300
200
100
-20
0
20
40
60
Temperature (ºC)
80
100
72
0.016
70
0.014
68
0.012
66
64
62
0
20
40
60
Temperature (ºC)
Output Capacitance (pF)
200
80
100
-40
-20
0
20
175
150
125
100
75
50
25
0
10
0.2
0.3
Typical Leakage vs. Temperature
Measured Across Pins 3&4
(VL=60V)
0.010
0.008
0.006
40
60
80
100
0
-40
-20
Temperature (ºC)
20
30
Load Voltage (V)
40
50
0
20
40
60
Temperature (ºC)
80
100
Energy Rating Curve
(IF=2mA)
Output Capacitance vs. Load Voltage
(IF=0mA, f=1MHz)
0
-0.1
0.0
0.1
Load Voltage (V)
0.002
Load Current (mA)
-20
-0.2
0.004
60
58
0
500
400
300
200
100
0
-100
-200
-300
-400
-500
-0.3
Typical Blocking Voltage
vs. Temperature
Maximum Load Current vs. Temperature
(IF=2mA)
Load Current (mA)
IF=5mA
IF=10mA
0.7
Temperature (ºC)
0.28
-40
IF=5mA
0.8
Temperature (ºC)
0.32
0.16
-40
Typical On-Resistance vs. Temperature
(IL=200mA)
Temperature (ºC)
LED Current (mA)
LED Current (mA)
0.36
-20
0.9
Load Current (mA)
-40
0.60
0.55
0.50
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
-40
Leakage (µA)
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Turn-Off Time vs. Temperature
(IL=80mA)
On-Resistance (:)
Turn-On Time vs. Temperature
(IL=80mA)
Turn-Off Time (ms)
Turn-On Time (ms)
PERFORMANCE DATA @ 25ºC (Unless Otherwise Noted)*
1100
1000
900
800
700
600
500
400
300
200
100
0
10Ps 100Ps 1ms 10ms 100ms
Time
1s
10s
100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.ixysic.com
R04
INTEGRATED CIRCUITS DIVISION
CPC1014N
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
Moisture Sensitivity Level (MSL) Rating
CPC1014N
MSL 3
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
Maximum Temperature x Time
Maximum Reflow Cycles
CPC1014N
260ºC for 30 seconds
3
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
R04
www.ixysic.com
5
INTEGRATED CIRCUITS DIVISION
CPC1014N
MECHANICAL DIMENSIONS
CPC1014N
4.089 ± 0.203
(0.161 ± 0.008)
Recommended PCB Land Pattern
0.200 ± 0.025
(0.008 ± 0.001)
0.60
(0.0217)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.432 ± 0.127
(0.017 ± 0.005)
5.60
(0.2205)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
1.30
(0.0512)
2.184 Max
(0.086 Max)
2.54
(0.10)
Pin to package standoff:
0.0637 ± 0.0383
(0.0025 ± 0.0015)
0.762 ± 0.102
(0.030 ± 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
CPC1014NTR Tape & Reel
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00
(0.472)
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Dimensions
mm
(inches)
Embossed
Carrier
Embossment
NOTE: All dimensional tolerances per Standard EIA-481-2 except as noted
For additional information please visit our website at: www.ixysic.com
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1014N-R04
©Copyright 2014, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
9/24/2014
6