SURFACE MOUNT DISPLAY APDA02-41MBWA BLUE Features Description !0.2INCH The Blue source color devices are made with GaN DIGIT HEIGHT. !LOW CURRENT OPERATION. on SiC Light Emitting Diode. !EXCELLENT Static electricity and surge damage the LEDS. It is CHARACTER APPEARANCE. !I.C. COMPATIBLE. recommended to use a wrist band or anti- !MECHANICALLY RUGGED. electrostatic glove when handling the LEDs. !GRAY FACE,WHITE SEGMENT. All devices, equipment and machinery must be ! PACKAGE electrically grounded. : 600PCS / REEL. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches),Tolerance is ±0.25(0.01") unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APDA02-41MBWA Iv (u c d ) @ 10 m A L en s Ty p e BLUE(GaN) Min . Ty p . 800 3700 WHITE DIFFUSED D es c r i p t i o n Common Anode,Rt. Hand Decimal Electrical / Optical Characteristics at TA=25°°C Sy m b o l P ar am et er D ev i c e λpeak Peak Wavelength Blue λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un its Tes t Co n d it io n s 430 nm I F =20mA Blue 466 nm I F =20mA Spectral Line Half-width Blue 60 nm I F =20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.8 4.5 V I F =20mA IR Reverse Current Blue 10 uA V R = 5V Absolute Maximum Ratings at TA=25°°C P ar am et er B lu e Un its Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 2 OF 4 Blue APDA02-41MBWA SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 3 OF 4 APDA02-41MBWA SMT Reflow Soldering Instruction Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specification (Units : mm) SPEC NO:DSAB2868 APPROVED : J. Lu REV NO: V.3 CHECKED :Joe Lee DATE: DEC/03/2002 DRAWN: X.T.HU PAGE: 4 OF 4