Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 830/831/834 Series Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 835 Cap 830 Series Holder FLUSH MOUNT TYPE 831 Series Holder Compatible Fuse Types 830 Series 831 Series 834 Series 5×20mm 5×20mm 5×20mm Holder/Cap: Black Thermoplastic, UL94 V-0 Materials Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned 837 Cap Rated Voltage: 250V 834 Series Holder FINGER GRIP TYPE Electrical Data (23ºC) Not for new designs - refer to No. 862 Rated Power: 1.6W (VDE) Rated Power: 2.5W (VDE) Mounting (3) Solder pins 0.5mm×1.1mm and plastic stud. The pins spaced at 5.08mm form a common connection. (4) Solder pins 0.5mm×1.1mm The pins spaced at 5.08mm form a common connection. Protection Class & Category IP 40 (IEC 60529) PC2 (IEC 60127-6) Operating Temperature -25 °C to 70 °C Product Dimensions 830 Series 831 Series max. 0,2 ø15 Bayonet-joint 32 max. 0,2 5,5 Fuse carrier inserted Bayonet joint 12,7 32,6 12,7 ø15 12,7 ø12,7 Fuse carrier inserted 0,6 3 Printed circuit board 0,5 -25ºC/+70ºC/21 days (IEC 60068-2-1...3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% 4,45 Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Contact Resistance ≤ 5mΩ Dielectric Strength > 1.5 kV 1,3 + 0,1 1,1 1,8 7,62 5,08 7,62 7,62 Holes in the printed circuit board: 1,3 + 0,1 5,08 2 + 0,1 12,7 5,08 5 0,5 Stud Holes in printed circuit board: 1,3 + 0,1 Impulse Voltage Fuse-carrier inserted max. 0,2 Insulation Resistance 835 Cap 834 Series 4 kV, 50 Hz, 1 min., dry max. 20,6 1,5 Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) ø9,2 7 Bayonet-join t 12,7 ø12,7 32,6 1,2 12,7 Slot for screwdriver Printed circuit board max. 29,6 1,5 7 ø9,2 Ø 1 , 3 ±0,1 10±0,1 Soldering Heat 260ºC, 5 sec. (IEC 60068-2-20) Resistance 235ºC, 2 sec. (Soldering bath) (IEC 60068-2-20) 350ºC, 3 sec. (Soldering Iron) (IEC 60068-2-20) 260ºC, 5 sec. (Soldering bath) (IEC 60068-2-20) Minimum Cross Section Conducting path - 0.2mm2 Marking 830, 250V, Approvals 831, 250V, Approvals 834, 250V, Approvals Unit Weight 4.4g (Holder) / 1.6g (835) / 2.2g (837) 4.1g (Holder) / 1.6g (835) / 2.2g (837) 3,5g (834) / 1,6g (835) / 2,2g (837) Bayonet-connector-nose 1,1 Agency approvals and ordering infornation is included on the next page. 7 5 0,6 3 837 Cap 4 kV with 1,2µs/50µs > 103 MΩ (500 VDC, 1 min.) Bayonet-connector-nose ø15,0 (2) Solder pins 0.5mm×1.1mm Climatic Test 5,08 12,7 Rated Power: 2.5W (VDE with 835 cap) 1,1 Printed circuit board 5 15 1,65 Stud ø2 -0,05 Rated Current: 6 .3A (VDE) 16A (UL/CSA) 1,2 Holes in the printed circuit board Slot for screwdriver © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 06/15/15 Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted Additional Information Agency Approval Agency Agency File Number 830 Series 831 Series 834 Series 120623 123441 6913 E70164 Datasheet 830 Series Resources 830 Series Samples 830 Series Datasheet 831 Series Resources 831 Series Samples 831 Series Datasheet 834 Series Resources 834 Series Samples 834 Series 47574 Ordering Information Ordering PN Description Fuseholder 830 0000 0005 ACS 5×20mm Fuseholder 830 Series for 250V 831 0000 0005 ACS 5×20mm Fuseholder 831 Series for 250V 834 0000 0005 ACS 5×20mm Fuseholder 834 Series for 250V Fuseholder Cap 835 0000 0005 ACS 5×20mm Fuseholder CAP 835 Series 837 0000 0005 ACS 5×20mm Fuseholder CAP 837 Series © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/15/15