Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted 810/811/813/814 Series Circuit Board Mount Enclosed Fuse Holders RoHS Pb Product Characteristics 810 Series Holder 815 Cap FOR 5×20MM FUSES 811 Series Holder Compatible Fuse Types 810 Series 811 Series 813 Series 814 Series 5×20mm 6.3×32mm 5×20mm 6.3×32mm 5×20mm 6.3×32mm 5×20mm 6.3×32mm Holder/Cap: Black Thermoplastic, UL94 V-0 Materials Metal Parts: Copper alloy, corrosion protected Terminals: Solderable, tinned Rated Voltage: 250V Rated Current: 6 .3A (VDE) 16A (UL/CSA) 813 Series Holder 816 Cap Electrical Data (23ºC) FOR 6.3×32MM FUSES 814 Series Holder Dimensions 810 Series max. 0,2 12,7 ø 15 46,3 12,7 1,9 Printed circuit board Operating Temperature -25 °C to 70 °C Climatic Test -25ºC/+70ºC/21 days (IEC 60068-2-1...3) Stock Conditions +10ºC to +60ºC relative humidity ≤ 75% yearly average, without dew, maximum value for 30 days - 95% Vibration Resistance 24 cycles at 15 min. each (IEC 60068-2-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Contact Resistance ≤ 5mΩ Dielectric Strength > 1.5 kV 5 7,62 3 0,5 27,94 0,6 ø 2 -0,05 5 Stud 12,7 1,65 Printed circuit board 1,1 15 5,08 27,94 5,08 1,3 + 0,1 7,62 7,62 Holes in the printed circuit board: 1,3 +0,1 5,08 2 + 0,1 1,1 Stud 0,5 4,45 Holes in the printed circuit board: 1,3 +0,1 813 Series 814 Series Impulse Voltage Fuse carrier inserted max.0,2 Fuse carrier inserted Bayonet-joint max. 0,2 45,7 ø15 Bayonet-joint body 46,3 ø12,7 10±0,1 12,7 17,8 10 10 ±0,1 7,9 15 1,,3 +0 0,5 2 -0,05 Stud 0,5 12,7 Printed circuitboard 13,8 Holes in the printed circuit board: 1,3 +0,1 815/816 Cap 0,5 1,1 +0,1 Stud Slot for screwdriver 17,8 10 1,3 +0,1 ø 9,2 2 +0,1 1,1 Printed circuit board 5,7 1,65 5 06, 3 5,5 > 103 MΩ (500 VDC, 1 min.) Solderability 235ºC, 3 sec. (Wave) 350ºC, 1 sec. (Soldering Iron) 260ºC, 5 sec. (IEC 60068-2-20) Min Cross Section Conducting path - 0.2mm2 Marking 810, 250V, Approvals 811, 250V, Approvals 813, 250V, Approvals 814, 250V, Approvals Unit Weight 5.4g(Holder) / 2.5g (Cap) 5.2g(Holder) / 2.5g (Cap) 5.8g (Holder) / 2.5g (Cap) 4.6g (Holder) 25g (Cap) Agency approvals and ordering infornation is included on the next page. Bayonet-connector-nose 7 Holes in the printed circuit board: 1,3 +0,1 1,5 4 kV, 50 Hz, 1 min., dry Insulation Resistance Soldering Heat Resistance flange (2) Solder pins 0.5mm × 1.1mm IP 40 (IEC 60529) PC2 (IEC 60127-6) Bayonet joint 12,7 Fuse ca rrier inserted (2) Solder pins 0.5mm × 1.1mm and plastic stud Protection Class & Category ∅15 ø 12,7 Rated Power: 2.5W (813+816 VDE) Mounting Fuse carrier inserted 45,7 (4) Solder pins 0.5mm × 1.1mm The pins spaced at 5.08mm form a common connection. RatedPower: 1.6W (813+815 VDE) 2.5W (813+816 VDE) (3) Solder pins 0.5mm × 1.1mm and plastic stud. The pins spaced at 5.08mm form a common connection. 811 Series Bayonet-joint max. 0,2 5,5 Rated Power: 2.5W (VDE) 1,2 max. 34 Cap 815 max. 33,8 Cap 816 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 06/15/15 Cartridge Fuse Holders Enclosed Fuseholders > Circuit Board Mounted Agency Approvals Agency Additional Information Agency File Number 810 Series 811 Series 813 Series 814 Series 118611 120642 118349 118347 E 70164 E 70164 E70164 E70164 47574 47574 47574 47574 Ordering Information Description Ordering Number Packaging Cap, 5×20 mm 815 0000 0005 Bulk 100 Cap, 6.3×32 mm 816 0000 0005 Bulk 100 810 Series Holder 810 0000 0005 Bulk 100 811 Series Holder 811 0000 0005 Bulk 100 813 Series Holder 813 0000 0005 Bulk 100 814 Series Holder 814 0000 0005 Bulk 100 Datasheet 810 Series Resources 810 Series Samples 810 Series Datasheet 811 Series Resources 811 Series Samples 811 Series Datasheet 813 Series Resources 813 Series Samples 813 Series Datasheet 814 Series Resources 814 Series Samples 814 Series © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/15/15