Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP-HRA series 5KP-HRA Series RoHS Pb e3 Description Uni-directional The 5KP-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E128662/E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit PPPM 5000 W PD 8.0 W IFSM 400 A VF 3.5/5.0 V TJ , TSTG -55 to 175 °C Typical Thermal Resistance Junction to Lead RuJL 8.0 °C/W Typical Thermal Resistance Junction to Ambient RuJA 40 °C/W Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) (Note 1) Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC (Fig. 6) Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional Only (Note 2) Maximum Instantaneous Forward Voltage at 100A for Unidirectional Only (Note 3) Operating Junction and Storage Temperature Range Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3. 2.Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. • Glass passivated chip junction in P600 package • 5000W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Fast response time: typically less than 1.0ps from 0 Volts to BV min • Excellent clamping capability • Typical failure mode is short from over-specified voltage or current • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact) • ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) • EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) • Low incremental surge resistance •Typical IR less than 2μA when VBR min>12V • High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension • VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) • Plastic package has underwriters laboratory flammability classification 94V-O • Lead-free matte tin plated package • Halogen free and RoHS compliant Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications. 3.VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts. Functional Diagram Bi-directional Cathode Anode Uni-directional © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/27/15 Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP-HRA series Electrical Characteristics (T =25°C unless otherwise noted) A Part Number (Uni) Part Number (Bi) Reverse Stand off Voltage VR (Volts) 5KP5.0A-HRA 5KP6.0A-HRA 5KP6.5A-HRA 5KP7.0A-HRA 5KP7.5A-HRA 5KP8.0A-HRA 5KP8.5A-HRA 5KP9.0A-HRA 5KP10A-HRA 5KP11A-HRA 5KP12A-HRA 5KP13A-HRA 5KP14A-HRA 5KP15A-HRA 5KP16A-HRA 5KP17A-HRA 5KP18A-HRA 5KP20A-HRA 5KP22A-HRA 5KP24A-HRA 5KP26A-HRA 5KP28A-HRA 5KP30A-HRA 5KP33A-HRA 5KP36A-HRA 5KP40A-HRA 5KP43A-HRA 5KP45A-HRA 5KP48A-HRA 5KP51A-HRA 5KP54A-HRA 5KP58A-HRA 5KP60A-HRA 5KP64A-HRA 5KP70A-HRA 5KP75A-HRA 5KP78A-HRA 5KP85A-HRA 5KP90A-HRA 5KP100A-HRA 5KP110A-HRA 5KP120A-HRA 5KP130A-HRA 5KP150A-HRA 5KP160A-HRA 5KP170A-HRA 5KP180A-HRA 5KP190A-HRA 5KP200A-HRA 5KP210A-HRA 5KP220A-HRA 5KP5.0CA-HRA 5KP6.0CA-HRA 5KP6.5CA-HRA 5KP7.0CA-HRA 5KP7.5CA-HRA 5KP8.0CA-HRA 5KP8.5CA-HRA 5KP9.0CA-HRA 5KP10CA-HRA 5KP11CA-HRA 5KP12CA-HRA 5KP13CA-HRA 5KP14CA-HRA 5KP15CA-HRA 5KP16CA-HRA 5KP17CA-HRA 5KP18CA-HRA 5KP20CA-HRA 5KP22CA-HRA 5KP24CA-HRA 5KP26CA-HRA 5KP28CA-HRA 5KP30CA-HRA 5KP33CA-HRA 5KP36CA-HRA 5KP40CA-HRA 5KP43CA-HRA 5KP45CA-HRA 5KP48CA-HRA 5KP51CA-HRA 5KP54CA-HRA 5KP58CA-HRA 5KP60CA-HRA 5KP64CA-HRA 5KP70CA-HRA 5KP75CA-HRA 5KP78CA-HRA 5KP85CA-HRA 5KP90CA-HRA 5KP100CA-HRA 5KP110CA-HRA 5KP120CA-HRA 5KP130CA-HRA 5KP150CA-HRA 5KP160CA-HRA 5KP170CA-HRA 5KP180CA-HRA 5KP190CA-HRA 5KP200CA-HRA 5KP210CA-HRA 5KP220CA-HRA 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 180.0 190.0 200.0 210.0 220.0 Breakdown Voltage VBR (Volts) @ IT MIN MAX Test Current IT (mA) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.00 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 110.00 122.00 133.00 144.00 167.00 178.00 189.00 200.00 211.00 222.00 233.00 244.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 221.00 233.00 246.00 258.00 270.00 50 50 50 50 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/27/15 Maximum Clamping Voltage VC @ IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @ VR (µ A) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 292.0 310.0 329.2 349.5 371.1 554.3 495.1 455.4 425.0 395.3 375.0 354.2 331.2 300.0 280.2 256.3 237.2 219.8 209.0 196.2 184.8 174.7 157.4 143.7 131.1 121.1 112.3 105.4 95.7 87.8 79.1 73.5 70.2 65.9 61.9 58.6 54.5 52.7 49.5 45.1 42.1 40.5 37.2 34.9 31.5 28.8 26.4 24.4 21.0 19.7 18.5 17.5 16.5 15.5 14.6 13.7 5000 5000 2000 1000 250 150 50 20 15 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Agency Approval X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP-HRA series Screen Process 100% Vision Inspection MIL-STD-750 method 2074 100% High Temperature Storage Life (168hrs,175°C) MIL-STD-750 method 1031 100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Surge Test (2x) MIL-STD-750 method 4066 100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each direction at 96 hrs for Bi-directional products) MIL-STD-750 method 1038 Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer’s request via contacting Littelfuse service I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR Vc VBR VR V IR VF IT IT IR IR IT V Ipp Ipp PPPM VR VBR VC IR VF VR VBR Vc Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Curve 1000 PPPM-Peak Pulse Power (KW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS TJ initial = Tamb 100 5kW at 10x1000µs, 25°C 10 1 0.001 Time 0.01 0.1 1 10 td-Pulse Width (Sec.) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/27/15 Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP-HRA series Figure 4 - Pulse Waveform 150 100 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % Figure 3 - Peak Pulse Power Derating Curve 75 50 25 0 0 25 50 75 100 125 150 175 200 tr=10µsec Half Value IPPM IPPM ( ) 2 50 0 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 100 100000 10000 Transient Thermal Impedance (°C/W) Uni-direconal V=0V Cj (pF) Peak Value IPPM 100 TJ - Initial Junction Temperature (ºC) Bi-direconal V=0V Uni-direconal V=VR 1000 100 Bi-direconal V=VR 10 1 1 10 100 10 1 0.1 1000 0.01 VBR - Reverse Breakdown Voltage (V) 0.1 1 10 100 1000 TP - Pulse Duration (s) Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values) 500 Single die 100 450 IF- Peak Forward Current(A) IFSM - Peak Forward Surve Current (A) TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 400 350 300 250 200 150 100 50 10 Stacked-die 1 0.1 0.01 0 1 10 Number of Cycles at 60 Hz © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/27/15 100 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 VF-Peak Forward Voltage(V) 8.0 9.0 10.0 Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP-HRA series Environmental Specifications Physical Specifications Weight 0.07oz., 2.1g High Temp. Storage JESD22-A103 Case P600 molded plastic body over passivated junction. HTRB JESD22-A108 Polarity Color band denotes the cathode except Bipolar. Temperature Cycling JESD22-A104 Terminal Matte Tin axial leads, solderable per JESD22-B102. H3TRB JESD22-A101 RSH JESD22-B106 Dimensions D Cathode Band (for Uni-directional products only) C A A B Inches Dimensions Millimeters Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.60 9.10 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.60 9.10 P600 Part Numbering System Part Marking System Cathode Band WITHOUT GROUP B TEST (for Uni-directional products only) HIGH RELIABILITY F 5KPxxx XX -HR A YYWW Trace Code Marking Littelfuse Logo TYPE CODE: A Uni-Directional (5% VBR Voltage Tolerance) CA Bi-Directional (5% VBR Voltage Tolerance) 5KPXXX-HRA YY:Year Code WW: Week Code Product Type VR VOLTAGE SERIES CODE Packing Options Part Number 5KPxxxXX-HRA Component Package Quantity Packaging Option P600 800 Tape & Reel Packaging Specification EIA STD RS-296 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/27/15 Transient Voltage Suppression Diodes Axial Leaded – 5000W > 5KP-HRA series Tape and Reel Specification Off Center either side 2.063+0.079/-0.039 (53.0+2.0/-1.0) 0.028(0.7) 2.56 (65.0) 0.047 (1.2) 0.394+/-0.020 (10.0+/-0.5) 13.0 (330.2) 0.236 (6.0) Dimensions are in inches/mm 3.0 (76.2) 0.68 (17.27) 2.75 (69.85) Recess Depth Max. 0.75 (19.05) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/27/15 Direction of Feed