Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ-HRA Series SMCJ-HRA Series RoHS Description Uni-directional The SMCJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. These are available with a variety of upscreening options for enhanced reliability. Bi-directional Agency Approvals AGENCY Pb e3 Features • High reliability devices with fabrication and assembly lots traceability • Enhanced reliability screening options are available in reference to MIL-PRF-19500. Refer to screen process table for more detail on screening options •For surface mounted applications to optimize board space • Low profile package • Built-in strain relief •V BR @TJ= VBR@25°C x (1+αT AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25ºC by 10/1000µs waveform (Fig.1)(Note 1), (Note 2) PPPM 1500 W Power Dissipation on infinite heat sink at TA=50OC PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 200 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only (Note 4) VF 3.5/5.0 V TJ , TSTG -65 to 150 °C Typical Thermal Resistance Junction to Lead RuJL 15 °C/W Typical Thermal Resistance Junction to Ambient RuJA 75 °C/W Operating Junction and Storage Temperature Range x (TJ - 25)) (αT:Temperature Coefficient) • Glass passivated chip junction • 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. • Fast response time: typically less than 1.0ps from 0V to BV min • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1µA above 12V • High Temperature soldering guaranteed: 260°C/40 seconds at terminals • Plastic package has Underwriters laboratory flammability 94V-O • Meet MSL level1, per J-STD-020, LF maximun peak of 260°C • Matte tin lead–free plated • Halogen free and RoHS compliant • 2nd level interconnect is Pb-free per IPC/JEDEC J-STD-609A.01 2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. _ 200V and VF<5.0V for VBR > _ 201V. 4. VF<3.5V for VBR < Functional Diagram Applications SMCJ-HRA devices are ideal for the high reliability protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Bi-directional Cathode Anode Uni-directional 1 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/28/15 Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ-HRA Series Electrical Characteristics Part Number (Uni) Part Number (Bi) SMCJ5.0A-HRA SMCJ6.0A-HRA SMCJ6.5A-HRA SMCJ7.0A-HRA SMCJ7.5A-HRA SMCJ8.0A-HRA SMCJ8.5A-HRA SMCJ9.0A-HRA SMCJ10A-HRA SMCJ11A-HRA SMCJ12A-HRA SMCJ13A-HRA SMCJ14A-HRA SMCJ15A-HRA SMCJ16A-HRA SMCJ17A-HRA SMCJ18A-HRA SMCJ20A-HRA SMCJ22A-HRA SMCJ24A-HRA SMCJ26A-HRA SMCJ28A-HRA SMCJ30A-HRA SMCJ33A-HRA SMCJ36A-HRA SMCJ40A-HRA SMCJ43A-HRA SMCJ45A-HRA SMCJ48A-HRA SMCJ51A-HRA SMCJ54A-HRA SMCJ58A-HRA SMCJ60A-HRA SMCJ64A-HRA SMCJ70A-HRA SMCJ75A-HRA SMCJ78A-HRA SMCJ85A-HRA SMCJ90A-HRA SMCJ100A-HRA SMCJ110A-HRA SMCJ120A-HRA SMCJ130A-HRA SMCJ150A-HRA SMCJ160A-HRA SMCJ170A-HRA SMCJ5.0CA-HRA SMCJ6.0CA-HRA SMCJ6.5CA-HRA SMCJ7.0CA-HRA SMCJ7.5CA-HRA SMCJ8.0CA-HRA SMCJ8.5CA-HRA SMCJ9.0CA-HRA SMCJ10CA-HRA SMCJ11CA-HRA SMCJ12CA-HRA SMCJ13CA-HRA SMCJ14CA-HRA SMCJ15CA-HRA SMCJ16CA-HRA SMCJ17CA-HRA SMCJ18CA-HRA SMCJ20CA-HRA SMCJ22CA-HRA SMCJ24CA-HRA SMCJ26CA-HRA SMCJ28CA-HRA SMCJ30CA-HRA SMCJ33CA-HRA SMCJ36CA-HRA SMCJ40CA-HRA SMCJ43CA-HRA SMCJ45CA-HRA SMCJ48CA-HRA SMCJ51CA-HRA SMCJ54CA-HRA SMCJ58CA-HRA SMCJ60CA-HRA SMCJ64CA-HRA SMCJ70CA-HRA SMCJ75CA-HRA SMCJ78CA-HRA SMCJ85CA-HRA SMCJ90CA-HRA SMCJ100CA-HRA SMCJ110CA-HRA SMCJ120CA-HRA SMCJ130CA-HRA SMCJ150CA-HRA SMCJ160CA-HRA SMCJ170CA-HRA UNI BI Reverse Stand off Voltage VR (Volts) GDEH GDGH GDKH GDMH GDPH GDRH GDTH GDVH GDXH GDZH GEEH GEGH GEKH GEMH GEPH GERH GETH GEVH GEXH GEZH GFEH GFGH GFKH GFMH GFPH GFRH GFTH GFVH GFXH GFZH GGEH GGGH GGKH GGMH GGPH GGRH GGTH GGVH GGXH GGZH GHEH GHGH GHKH GHMH GHPH GHRH BDEH BDGH BDKH BDMH BDPH BDRH BDTH BDVH BDXH BDZH BEEH BEGH BEKH BEMH BEPH BERH BETH BEVH BEXH BEZH BFEH BFGH BFKH BFMH BFPH BFRH BFTH BFVH BFXH BFZH BGEH BGGH BGKH BGMH BGPH BGRH BGTH BGVH BGXH BGZH BHEH BHGH BHKH BHMH BHPH BHRH 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 Marking Breakdown Voltage VBR (Volts) @ IT MIN MAX 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. 2.SMCJ-HRA voltage binning can be specified by customer’s request via contacting Littlefuse service © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/28/15 2 Maximum Maximum Maximum Test Agency Peak Reverse Current Clamping Approval Voltage VC Pulse Leakage IR IT @ Ipp Current Ipp @ VR (mA) (V) (A) (µA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 163.0 145.7 134.0 125.0 116.3 110.3 104.2 97.4 88.3 82.5 75.4 69.8 64.7 61.5 57.7 54.4 51.4 46.3 42.3 38.6 35.7 33.1 31.0 28.2 25.9 23.3 21.7 20.6 19.4 18.2 17.3 16.1 15.5 14.6 13.3 12.4 11.9 11.0 10.3 9.3 8.5 7.8 7.2 6.2 5.8 5.5 800 800 500 200 100 50 20 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ-HRA Series Screen Process 100% vision inspection MIL-STD-750 method 2074 100%High Temperature Storage Life (168hrs,150C) MIL-STD-750 method 1031 100% X-RAY inspection MIL-STD-750 method 2076 100% Temperature cycle test (-55-150C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Reflow (2X) JEDEC J-STD-020 100% surge test (2x) MIL-STD-750 method 4066 100% HTRB(150C, Bias=VR(80% breakdown voltage), 96hrs),for Bidirection products, 96hrs for each direction MIL–STD–750 method 1038 Final electrical test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR Vc VBR VR V IR VF IT Ipp PPPM VR VBR VC IR VF IT IR IR IT VR VBR Vc V Ipp Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum voltagethat flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25°C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating 100 PPPM-Peak Pulse Power (kW) Voltage Transients Voltage or Current Voltage Across TVS Current Through TVS 10 0.31x0.31" (8.0x8.0mm) Copper Pad Area 1 0.000001 0.00001 0.0001 td-Pulse Width (sec.) Time 3 0.001 © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/28/15 Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ-HRA Series Ratings and Characteristic Curves (T =25°C unless otherwise noted) (Continued) A Figure 3 - Pulse Derating Curve Figure 4 - Pulse Waveform 150 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 80 60 40 20 0 0 25 50 75 100 125 150 tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Peak Value IPPM 100 Half Value IPPM IPPM ( ) 2 50 0 175 TA-Ambient temperature (ºC) 10/1000µsec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) Figure 6 - Steady State Power Dissipation Derating Curve Figure 5 - Typical Junction Capacitance Bi-directional V=0V 10000 Cj (pF) PM(AV), Steady Sate Power Dissipation (W) 100000 Uni-directional V=0V 1000 Uni-directional @VR 100 Bi-directional @VR 10 Tj=25C f=1.0MHz Vsig=50mVp-p 1 1.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) IFSM - Peak Forward Surge Current (A) Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only 200 180 160 140 120 100 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/28/15 4 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 TA - Ambient Temperature (ºC) 175 Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ-HRA Series Soldering Parameters Lead–free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 – 150 seconds Peak Temperature (TP) 260 Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds +0/-5 tp TP Temperature (T) Reflow Condition tL Ts(max) Ramp-down Ts(min) ts Preheat 25˚C t 25˚C to Peak Time (t) °C Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Critical Zone TL to TP Environmental Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 MSL JEDEC-J-STD-020, Level 1 Physical Specifications Weight 0.007 ounce, 0.21 grams Case JEDEC DO214AB. Molded plastic body over glass passivated junction Polarity Color band denotes positive end (cathode) except Bidirectional. H3TRB JESD22-A101 Terminal Matte Tin-plated leads, Solderable per JESD22-B102 RSH JESD22-B106 Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) A C A B H D F E J G K L I Solder Pads (all dimensions in mm) 5 Inches Millimeters Min Max Min Max 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F 0.002 0.008 0.051 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/28/15 Transient Voltage Suppression Diodes Surface Mount – 1500W > SMCJ-HRA Series Part Numbering System Part Marking System SMCJ XXX C A -HR A Cathode Band WITHOUT GROUP B TEST F HIGH RELIABILITY 5% VOLTAGE TOLERANCE Littelfuse Logo BI-DIRECTIONAL XXXX YMXXX VOLTAGE SERIES Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Part number Component Package SMCJxxxXX-HRA DO-214AB 3000 Tape & Reel – 16mm tape /13” reel EIA STD RS-481 SMCJxxxXX-HRAT7 DO-214AB 500 Tape & Reel – 16mm tape /7” reel EIA STD RS-481 Packaging Option Quantity Packaging Specification Tape and Reel Specification 0.157 (4.0) 0.63 (16.0) Cathode 0.315 (8.0) Optional 7” 7.0 (187) 13” 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/28/15 0.059 DIA (1.5) Cover tape Dimensions are in inches (and millimeters). Direction of Feed 6