PLANAR TRANSFORMERS HIGH FREQUENCY 75 WATT PP20B SERIES • Power Rating Up to 75 Watts • High Efficiency of Over 98% • Footprint 20.30 mm X 18.50 mm • Lower Profile of 6.6 mm • High Isolation (operational) 1500 Vdc • High Frequency 200 KHz – 700 kHz • Operating Temperature -40ºC to +125ºC • Custom Design Available ELECTRICAL PARAMETERS @ 25°C Part Number PP20B- Primary Inductance (μH MIN) Leakage Inductance (μH MAX) DC Resistance Turns Ratio (mΩ MAX) Primary A Aux Secondary Primary Secondary Isolation (VDC) Figure 0601 50 0.30 20 100 1.5 & 1.5 6T 1T // 1T 1500 A 0602 50 0.30 20 100 3.00 6T 1T+1T 1500 A 0603 50 0.30 20 100 4.50 6T 3T 1500 B 0606 50 0.30 40 200 8.50 6T 6T 1500 C 0608 50 0.25 40 200 15.0 6T 8T 1500 C 0610 50 0.25 40 200 23.0 6T 10T 1500 C 1201 200 0.90 70 180 1.5 & 1.5 12T 1T // 1T 1500 A 1202 200 0.90 70 180 3.00 12T 1T+1T 1500 A 1203 200 0.90 70 180 4.50 12T 3T 1500 B 1206 200 0.70 140 360 8.50 12T 6T 1500 C 1208 200 0.70 140 360 15.0 12T 8T 1500 C 1210 200 0.70 140 360 23.0 12T 10T 1500 C APPLICATION OF CONFIGURATION APPLICATION OF CONFIGURATION Part Number PP20B- Vin Vout / Iout Part Number PP20B- Vin Vout / Iout 0601 18 – 36 Vdc [email protected] [email protected] 1201 36 – 75 Vdc [email protected] [email protected] 0602 18 – 36 Vdc [email protected] -- [email protected] 1202 36 – 75 Vdc [email protected] -- [email protected] 0603 18 – 36 Vdc 5.0V @15A 1203 36 – 75 Vdc 5.0V@15A 0606 18 – 36 Vdc [email protected] -- [email protected] 1206 36 – 75 Vdc [email protected] -- [email protected] 0608 18 – 36 Vdc [email protected] -- [email protected] 1208 36 – 75 Vdc [email protected] -- [email protected] 0610 18 – 36 Vdc [email protected] -- [email protected] 1210 36 – 75 Vdc [email protected] -- [email protected] NOTES: 1. The inductance is measured in windings Pin (2-5) at 100 KHz 100 mVrms 2. The leakage inductance is measured in winding Pin (2 -5) with all other windings shorted Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 www.mpsind.com [email protected] PLANAR TRANSFORMERS HIGH FREQUENCY 75 WATT PP20B SERIES DIMENSIONS (mm) SUGGESTED PAD LAYOUT SCHEMATICS Figure A Figure B Product performance is limited to specified parameters. Data is subject to change without prior notice. Tel: 310-325-1043 Fax: 310-325-1044 Figure C Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X,X : ±0,38 X,XX : ±0,10 www.mpsind.com [email protected]